Shonky!It flipping works!
And since taking this pic, I’ve soldered up a bit more, and it can boot from a real floppy disk, the mouse works, sound works, all in all, a very successful day!
❀𝓪𝓵𝓬𝓮𝓪𖤐 
@alcea •acws #acws
Whadoyouknow ?
Its not broken after all.
Checked polarity. Used tweezers to bend in back the inner pin of the xt60 and reinserted the og battery.
#itlives
(Can't say the same for our 30000mah "battery"
Looks like a goner...)
https://ibb.co/GQccLDwv
https://i.ibb.co/RTzzmKnp/joined-image-1.png
Now..
The "where to find a good replacement battery issue is still there..."
Whadoyouknow ?
Its not broken after all.
Checked polarity. Used tweezers to bend in back the inner pin of the xt60 and reinserted the og battery.
#itlives
(Can't say the same for our 30000mah "battery"
Looks like a goner...)
https://ibb.co/GQccLDwv
https://i.ibb.co/RTzzmKnp/joined-image-1.png
Now..
The "where to find a good replacement battery issue is still there..."
joined-image-1
Suburban TimewasterGreat news! Not only did I finish the rough draft for the second chapter of my #itlivesinthewoods recap but I’m on round two of editing my #rangerreject #Fanfition #choices #itlives #writing #update
yawning_angelThe story of my ‘new’ Amiga and how I modded it. Yes, the #backinblack Amiga lives. Watch the video of its creation… 😱🧛🏻
(Yes, it’s a ‘hardware’ video from me, so expect ‘issues’. 😅)
Amiga A1200 modifications - Modernising a humble Amiga - 'Back In Black'
https://youtube.com/watch?v=yYaO36PRcWk&si=b6SmzZjtUtcA1Epk
I can’t believe it! After all these years, Mr. Red’s come back! #fanfiction #recap #podcast #choices #itlivesinthewoods #itlives #youtube
It Lives In The Woods: Old Friends Podcast
JamesAkersIt took me years, but I finally created a handle for this lil cheap- O (but effective) induction heater. I wanted it to heat electrodes while under vacuum (doing so makes the tube run better) and oven pumping- but since I bombard pretty much everything- I haven't really needed it. This one is super cheap I paid like, $60 for the ATX power supply and $40 for the induction heater board off ebay. 500 watts 12vdc is a nice tool!
#cobbledtogether #itlives #sculpture #itselectric #science #diy #tools
#cobbledtogether #itlives #sculpture #itselectric #science #diy #tools
BlueShiftNZ
MattHere's some good news...
There's a new account for #Fedilab #Tubelab #Untrackme etc at @apps
#itlives
There's a new account for #Fedilab #Tubelab #Untrackme etc at @apps
#itlives