Film Review Blog No. 106 – ORWO Wolfen P400

Like last year's review of ORWO Wolfen NP100, ORWO Wolfen P400 is a version of ORWO N74+ but modified to better suit still-photography by removing the anti-halation layer. I had this film stock on my wish list and was able to find it last year through Freestyle. The one thing I also noticed is that there is a slight difference between the two film stocks to indicate that something else has been done to the film stock in the process of stripping that layer. Thankfully there is already a lot of existing times that are listed directly for P400. The first thing I noticed with the film is that it is all packaged in newer metal cassettes not the plastic ones that I encountered with my review of NP100, the second is how thin the film feels compared to past ORWO motion picture films.

Film Specs
Manufacturer: ORWO
Name: Wolfen P400
Type: Panchromatic Black & White
Film Base: Polyester
Film Speed: ASA-400, Latitude: +/- 2-Stops
Formats Available: 135 (35mm)

Roll 01 - Flic Film B/W Cine Film Developer
While P400 is modified to suit better photography, it is still, at its core, a motion picture film, so I'm starting off the review using the normal motion picture film developer, Kodak D-96, or in this case, the Flic Film produced version. Going with the stock dilution and dropping the time from my listed 6.5 minutes to 6.25 minutes to compensate slightly for exposing the film at ASA-320, the negatives looked thin but had good detail. And they scanned well, and with some adjustments in Photoshop, I'm pleased with these images. There's a good contrast, thanks mainly to the mixed light. I noticed the most that these images seemed a little soft, and the grain was a bit mushy but still present. That is more thanks to the developer rather than the film itself. I like this combination. It works well in these conditions and gives you a better feel for what the film can do than straight D-76.

Minolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.4 - ORWO Wolfen P400 @ ASA-320 - Flic Film B/W Cinefilm Developer (Stock) 6:15 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.4 - ORWO Wolfen P400 @ ASA-320 - Flic Film B/W Cinefilm Developer (Stock) 6:15 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.4 - ORWO Wolfen P400 @ ASA-320 - Flic Film B/W Cinefilm Developer (Stock) 6:15 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.4 - ORWO Wolfen P400 @ ASA-320 - Flic Film B/W Cinefilm Developer (Stock) 6:15 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.4 - ORWO Wolfen P400 @ ASA-320 - Flic Film B/W Cinefilm Developer (Stock) 6:15 @ 20C

Roll 02 - Ilford Ilfotec HC
The only available time for Ilfotec HC was a 1+31 dilution. I always preferred to develop motion picture films in 1+63, so I went ahead and shot the roll at the full box speed of ASA-400 and doubled the available time while knocking it back to compensate for the constant rotation in development. I also shot this roll under bright, challenging conditions and more mixed light under trees. I should have let these develop a bit longer, the negatives were rather thin, but I'd take thin negatives over dense ones. Sadly, these were too thin, but with a bit of work in the post, I was able to pull out some images. I'm not a fan, but they work, and I'm not too happy with them. First, there is a lot of grain and medium contrast, but the images are sharp. Now I understand that P400/N74+ is not a fine-grain film, but all the same, these are mushy and grainy. Two things happened here: under-exposed and under-developed. I should have exposed these at either ASA-320 or ASA-250 and developed normally. As for the under-development, I'm leaning towards my bottle of Ilfotec HC reaching the end of its life. Either way, Ilfotec HC can work as a developer, but you will want to over-expose your film between 1/3 and 2/3 of a stop.

Minolta Maxxum 9 - Minolta Zoom AF 24-105mm 1:3.5-4.5 D - ORWO Wolfen P400 @ ASA-400 - Ilford Ilfotec HC (1+63) 11:45 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Zoom AF 24-105mm 1:3.5-4.5 D - ORWO Wolfen P400 @ ASA-400 - Ilford Ilfotec HC (1+63) 11:45 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Zoom AF 24-105mm 1:3.5-4.5 D - ORWO Wolfen P400 @ ASA-400 - Ilford Ilfotec HC (1+63) 11:45 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Zoom AF 24-105mm 1:3.5-4.5 D - ORWO Wolfen P400 @ ASA-400 - Ilford Ilfotec HC (1+63) 11:45 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Zoom AF 24-105mm 1:3.5-4.5 D - ORWO Wolfen P400 @ ASA-400 - Ilford Ilfotec HC (1+63) 11:45 @ 20C (Constant Rotation)

Roll 03 - Rodinal
For my third roll and using Rodinal I decided to over-expose the film by one stop, shooting at ASA-200 then pulling in my development and using a 1+50 dilution with further reduction to compensate for constant rotation. And I thought the previous roll had a lot of grain, this one has even more! But I was prepared for it but on the plus side the images are sharp, the downside is that the contrast feels flat in some scenes but that could be more the lighting than the film. I don't enjoy high-contrast images and do like a low-contrast image but on cine-films I look for something middle ground, with character. And these images don't have that. Of course, I could always have played around with the contrast in post-processing and given the frames a bit more character.

Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - ORWO Wolfen P400 @ ASA-200 - Blazinal (1+50) 9:00 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - ORWO Wolfen P400 @ ASA-200 - Blazinal (1+50) 9:00 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - ORWO Wolfen P400 @ ASA-200 - Blazinal (1+50) 9:00 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - ORWO Wolfen P400 @ ASA-200 - Blazinal (1+50) 9:00 @ 20C (Constant Rotation)Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - ORWO Wolfen P400 @ ASA-200 - Blazinal (1+50) 9:00 @ 20C (Constant Rotation)

Roll 04 - Adox XT-3
For the fourth and final roll I went with Adox XT-3, the Adox clone of Kodak Xtol using a 1+1 dilution. While I wanted to use 510-Pyro here, I went with an officially listed time. After seeing the trouble with the Ilfotec HC roll and the lovely results I got from B/W Cine developer, I went and exposed the roll at ASA-320 and developed normally. Upon pulling the negatives out of the tank, I was pleasantly surprised. The negatives did not look under or over developed and had good visible density on initial inspection. While these were certainly better than the second and third roll they still have problems, there's the compressed tonal range and despite being a fine-grain developer XT-3 did little to reduce the visible grain to something far more pleasing. Despite having high hopes for this roll I was still a little disappointed.

Minolta Maxxum 9 - Minolta Maxxum AF 20mm 1:2.8 - ORWO Wolfen P400 @ ASA-320 - Adox XT-3 (1+1) 9:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 20mm 1:2.8 - ORWO Wolfen P400 @ ASA-320 - Adox XT-3 (1+1) 9:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 20mm 1:2.8 - ORWO Wolfen P400 @ ASA-320 - Adox XT-3 (1+1) 9:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 20mm 1:2.8 - ORWO Wolfen P400 @ ASA-320 - Adox XT-3 (1+1) 9:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 20mm 1:2.8 - ORWO Wolfen P400 @ ASA-320 - Adox XT-3 (1+1) 9:30 @ 20C

Final Thoughts
Thankfully, the thinner base did not present any problems loading the film onto the reels, but I noticed that the film appears to be bulk-loaded rather than commercially loaded. I also noticed that the film tends to fog easily, so keeping it out of direct light is best. It could be because of the room's temperature, but I noticed a slight cupping when the film dried. All four rolls of the negatives came out thin, which made scanning difficult but not impossible. You could increase the development times by fifteen to thirty seconds to get added density and expose the film to your taste at either ASA-320 or ASA-250. It also doesn't surprise me that the best results from the film came from the roll developed in Flic Film B/W Cine Developer (Kodak D-96), and be ready to play around with the contrast in post-processing to get it where you want it. I'll be cautious in recommending this film; it isn't that P400 is a bad film; it takes a bit more effort to get good results, and you have to be willing to play a bit more in post-processing. This review warrants revisiting the film stock for a review (ORWO N74+) to see about getting it to a point where I'm happier with my results. What I think will help this film out the most is lots of good hard light.

Further Reading
Don't just take my word on P400, you can check out the reviews by other awesome camera reviewers!
Shoot Film Like A Boss - ORWO P400 Review

#filmreviewblogs #adoxxt3 #blazinal #cambridge #canada #filmreview #flicfilmbwcinefilmdeveloper #galt #guelph #ilfordilfotechc #minoltamaxxum9 #oakville #ontario #orwowolfenp400 #review #toronto

Film Retrospective | 100 Reviews Special

This is only the second time I've reached a significant milestone in my ongoing reviews, the magic number of one hundred. And to be clear, I've done one hundred film reviews, not reviewed one hundred separate film stocks. And that's because I've reviewed some rebadged films; sometimes, I knew it was a rebadge and then made a point not to go after that film stock again, notability ORWO films. I reviewed the four motion picture-specific films from ORWO as their Lomography rebadge. But in the case of Fomapan 100, I reviewed that first as KosmoFoto Mono 100 and then again as Fomapan 100. Agfa AviFoto 80 has been reviewed many times under Rollei Retro 80s, Rollei RPX 25, Adox HR-50 and Adox Scala 50. So today, I will look back at the last 100 reviews and make a top list of some of my favourites, similar to what I did at the 100 camera review mark but slightly different.

Top Five Favourite Films
It's always hard to choose just one! But in these cases these are films that are still produced and readily available. They are also ones that I will always grab when I need to get the shot! Both for my personal and professional work. And yes, these days it is mostly Ilford on the list, which is interesting because when I started reviewing film stocks, it would have been dominated by Kodak.

Ilford FP4+
When it comes to a go-to mid-speed film, Ilford FP4+ is that film. It offers up everything I look for in this speed range, with excellent tonality, great latitude, classic grain and excellent edge sharpness. I was first introduced to FP4+ when Kodak discontinued Plus-X and I wanted something similar, and FP4+ was that film, even has the classic ASA-125 box speed. It's my goto for outdoor events, portrait work, and general photography. Plus I can use it in all my cameras from 35mm up to 4×5 and larger. And it handles any situation I throw at it when it comes to lighting, natural, artificial, high-contrast, low contrast. And you can over and under expose it and push/pull in development when the situation requires such a process. And it responds to ever developer I throw its way.

Minolta Maxxum 9 - Konica-Minolta Zoom AF 24-105mm 1:3.5-4.5 D - Ilford FP4+ @ ASA-125 - Tetenal Neofin Blau (1+9) 9:00 @ 20C (Constant Rotation)Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Ilford FP4+ @ ASA-125 - 510-Pyro (1+100) 10:30 @ 20CMamiya m645 - Mamiya-Sekor C 45mm 1:2.8 N - Ilford FP4+ @ ASA-125 - Adox FX-39 II (1+9) 6:00 @ 20CPacemaker Crown Graphic - Fuji Fujinon-W 1:5.6/125 - Ilford FP4+ @ ASA-64 - Pyrocat-HD (1+1+100) 8:00 @ 20C

Ilford Delta 100
While of a speed similar to FP4+, Delta 100 is the one film I take when I need something that looks sharp and modern. Thanks to the contemporary emulsion, I can achieve excellent results across all the formats. I started to enjoy Delta 100 with my original review set in 2015 when I began exploring the Ilford line of films and developers. And I'm glad I did; this spot would have been filled with Tmax 100, but I needed to find something similar with the cost increases. Also, Delta 100 works well with all the developers I use. It has become the go to film stock for my lens tests along with Delta 400. Now to see if I can over-expose it to ASA-32.

Nikon F5 - AF Nikkor 35mm 1:2D (Yellow-12) - Ilford Delta 100 @ ASA-100 - Fotospeed FD10 (1+9) 7:00 @ 20CModified Anniversary Speed Graphic - Schneider-Kreuznack Angulon 1:6,8 90mm - Ilford Delta 100 @ ASA-50 - Agfa Rodinal (1+25) 7:00 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Ilford Delta 100 @ ASA-100 - Kodak HC-110 Dil. E 7:30 @ 20CBronica GS-1 - Zenzanon-PG 1:3.5 f=100mm - Ilford Delta 100 @ ASA-80 - SPUR HRX (1+20) 9:00 @ 20C

Ilford HP5+
You guessed it, another Kodak replacement. While I struggled for a while to come to love Ilford HP5+ in 35mm, I always enjoyed working with it in medium and large format. Probably my favourite combination across the board is shooting it at ASA-200 and developing it in Pyrocat-HD. But it works well in almost any developer, except Rodinal. Perfect when you need a fast shutter speed, offers up excellent latitude. Good tonality, edge sharpness, and a bit more visible grain but nothing too serious.

Minolta XE-7 - Minolta MD Rokkor-X 45mm 1:2 - Ilford HP5+ @ ASA-400 - Kodak D-76 (1+1) 13:00 @ 20CHolga 120N - Optical Lens f=60mm 1:8 - Ilford HP5+ @ ASA-400 - Ilford ID-11 (1+1) 11:00 @ 20C (Constant Rotation)Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Ilford HP5+ @ ASA-1600 - Bellini EcoFilm (Stock) 11:00 @ 20C (Constant Rotation)Graflex Crown Graphic - Fuji Fujinon-W 1:5.6/125 - Ilford HP5+ @ ASA-200 - Pyrocat-HD (1+1+100) 9:00 @ 20C

Eastman-Kodak Double-X 5222
Wait, there's a 200-speed film that I actually enjoy working with? Well yes, because there is something incredibly special about Double-X. First there is the connection to motion pictures, Casino Royale and more recently Oppenheimer. But Double-X always delivers the goods, while not fine-grained, it has a wonderful grain structure, and a tonality that goes on for days. I use this film for street photography, general-purpose and travel. It can be developed in a lot of different developers, but it does look amazing in Kodak's dedicated motion picture developer D-96. No matter the situation, this film will give you excellent image quality. Plus if you go through CineStill you can get Double-X in both 35mm and 120 formats.

Hasselblad 500c - Carl Zeiss Planar 80mm 1:2.8 - Cinestill BwXX @ ASA-200 - FPP D96 (Stock) 6:00 @ 20CNikon F5 - AF Nikkor 85mm 1:1.8D - CineStill BwXX @ ASA-250 - Ilford Ilfotec HC (1+63) 10:45 @ 20C (Constant Rotation)Mamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - CineStill BwXX @ ASA-250 - Fotospeed FD10 (1+9) 10:00 @ 20CNikon F5 - Tamron AF 100-300mm 1:5-6.3 - Cinestill BwXX @ ASA-200 - Cinestill D96 (Stock) 6:30 @ 20C

Ilford Pan F+
It's always good to have a slow film in your toolkit. And while there are plenty of options, my go-to when things matter is Ilford Pan F+. You get a slow film with lots of contrast and latitude. Excellent edge sharpness and fine grain. Plus, you can throw it in almost any developer and get excellent results. Perfect for landscapes, portraits, and bright days. It replaces Panatomic-X a little more than TMax 100 does in my books, despite having much more contrast. And it looks good in high-contrast developers like D-19, much better than I thought it would.

Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Ilford Pan F+ @ ASA-50 - Tetenal Neofin Blau (1+9) 12:15 @ 20C (Constant Rotation)Nikon F5 - AF Nikkor 24mm 1:2.8 - Ilford Pan F+ @ ASA-50 - Kodak D-19 (1+1) 5:30 @ 20C (Constant Rotation)Canon EOS 3000 - Canon Lens EF 28mm 1:2.8 - Ilford Pan F+ @ ASA-50 - 510-Pyro (1+100) 6:15 @ 21CHasselblad 500c - Carl Zeiss Planar 80mm 1:2.8 - Ilford Pan F+ @ ASA-50 - Ilford Microphen (1+1) 6:00 @ 20C

Top Five Discontinued Film Stocks
While we are lucky to have as many films out there as we do today, there are many that have been discontinued. Some recently, others before I was born. Yet I still am drawn towards a bunch of these and will purchase them when I come across them at a camera fair, store, or online.

Kodak Panatomic-X - Discontinued: 1987
By this point, you're probably sick of me extolling the virtues of Panatomic-X. But I cannot stop; it's such a great film and, oddly enough, one I found because I thought the name was cool. I mean, Panatomic-X, it's so cold war! Now this film is only for some, it doesn't have a lot of contrast natively, but that can be fixed in either post-processing or by using a strong mix of a high-contrast developer. While personally, I love the film in D-76, HC-110 (Dil. H), and Xtol. It might do well in D-19 (to boost that contrast) or drop the contrast even more with D-23. And while Panatomic-X is long gone, a few options exist to get a near experience. You can always shoot TMax 100 at ASA-32 and pull the film in development, or get your hands on CatLABS X Film 80 or Mk. II.

Mamiya m645 - Mamiya-Sekor C 45mm 1:2.8 N - Kodak Panatomic-X @ ASA-32 - Kodak D-76 (Stock) 5:00 @ 20CNikon FA - AI-S Nikkor 50mm 1:1.4 - Kodak Panatomic-X @ ASA-32 - Blazinal (1+50) 10:00 @ 20CNikon F4 - AF Nikkor 35mm 1:2D - Kodak Panatomic-X @ ASA-32 - Kodak Xtol (1+1) 7:30 @ 20CMinolta XE-7 - Minolta MD Rokkor-X 45mm 1:2 - Kodak Panatomic-X @ ASA-32 - Kodak HC-110 Dil. H 9:00 @ 20C

Kodak Kodachrome - Discontinued: 2002-2009
It would only be a list of discontinued films with Kodachrome. I first heard about Kodachrome through the Film Photography Project right when Kodak announced the discontinuation of the legendary film stock. I got my hands on a couple of rolls, but sadly those were poorly stored, and they showed. But I got more from Sean Galbraith, and these were in top condition, and I started to see why people love this film so much! It has rich, authentic colour reproduction. But I also had the chance to shoot Kodachrome 25 and Kodachrome 40 (Tungsten) balanced and get them out to Dwayne's Photo before they stopped processing the film.

Nikon F3 - AI-S Nikkor 50mm 1:1.4 - Kodak Kodachrome 64 - Processing By: Dwyanes PhotoNikon F3 - AI-S Nikkor 50mm 1:1.4 - Kodak Kodachrome 64 - Processing By: Dwyanes PhotoNikon F4s - AF Nikkor 35mm 1:2D - Kodak Kodachrome 25 - Processing By: Dwyanes PhotoNikon F4s - AF Nikkor 35mm 1:2D - Kodak Kodachrome 40 Type A - Processing By: Dwyanes Photo

Fujifilm Astia 100F - Discontinued: 2011
Fuji often gets a bad rap for it's constant discontinuation of films, and most of these films are slide films. Although they are noted for some colour negative and B&W stocks that people still yearn after. But of all the films that Fuji has discontinued, my favourite, oddly is a slide film. Fujifilm Astia 100F is the second slide film that I ever shot, the first is the Sensia line. But it was Astia that made me love slide film. It had the perfect balance of contrast, sharpness, and colour replication. In fact, I feel it had the most realistic colour replication of all the Fuji slide films.

Nikon F3 - AI-S Nikkor 50mm 1:1.4 - Fuji Astia 100F @ ASA-100 - Processing By: Silvano'sRollieflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Fuji Astia 100F @ ASA-100 - Processing By: Silvano'sArsenal Kiev 88 - Biometar 80mm 1:2.8 - Fuji Astia 100F @ ASA-100 - Processing By: Silvano'sIntrepid 4×5 Mk. I - Schneider-Kreuznach Symmar-S 1:5.6/210 - Fuji Astia 100F @ ASA-100 - Processing By: The Darkroom

Agfa APX 25 - Discontinued: 1989-2000
I'll admit, I had a roll of APX 25 in 120 long before I knew what the film was and used it to practice loading film onto Patterson reels in daylight. I admit that mistake, but since then, I have used this film several times, including a 120-roll. I enjoy working with slow films, and APX 25 offers excellent edge sharpness, fine grain, and fantastic tonality. While you get terrific results from Rodinal, I enjoyed using Adox FX-39 II. But I also have gotten superb results from Fotospeed FD10. I am looking forward to trying the film with Diafine and Compard R09 Spezial (Studional). I do regret not being able to develop a roll in Tetenal Neofin Blau, but you cannot make the old stock solution with the new bottles.

Minolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - Agfa APX 25 @ ASA-25 - Ilford ID-11 (Stock) 8:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - Agfa APX 25 @ ASA-25 - Ilford Ilfotec HC (1+63) 11:30 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Agfa APX 25 @ ASA-25 - Adox Rodinal (1+50) 9:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - Agfa APX 25 @ ASA-25 - Adox FX-39 II (1+9) 5:15 @ 20C

Efke Films - Discontinued: 2012
Okay, so I'm going a little weird for this last one because I'm including all Efke films in this section. While I have only done an official review (twice) for KB100 (the fastest film of the group), I have had the chance to shoot all three versions. Efke's line of films includes ASA-25, ASA-50, and ASA-100 versions and are based on the original Adox B&W films released in the mid-20th Century. Efke got their hands on the formulas and equipment after Dupont sold it in 1972. Eventually, Fotoimpex would begin rebadging the film under the Adox name until discontinuation in 2012, when Efke could no longer maintain the equipment. After learning about Freestyle Photographic through the Film Photography Project, I first got my hands on films. I started to explore the weird world of B&W films. The films are silver rich and provide a classic look that most modern films don't offer. However, you did need to use a water stop bath and hardening fixer to preserve these film stocks.

Zeiss Ikon Contax IIIa - Carl Zeiss Jena Tessar 1:3,5 f=5cm T - Efke KB100 @ ASA-100 - Kodak D-23 (Stock) 7:45 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Adox CHS 100 - Blazinal (1+25) 6:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D (Yellow-15) - Efke KB50 @ ASA-50 - Kodak Xtol (Stock) 8:00 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Adox CHS 50 - Processing By: Silvano'sPacemaker Crown Graphic - Fuji Fujinon W 1:5.6/125 - Efke PL25 @ ASA-25 - PMK Pyro (1+2+100) 7:30 @ 21CModified Anniversary Speed Graphic - Fuji Fujinon-W 1:5.6/125 - Efke PL25 @ ASA-25 - PMK Pyro (1+2+100) 7:30 @ 21C

Top Five Favourite B &W Films
While these aren't always the one I'll reach for when results matter, they are among my favourites that I've shot and used. And I continue to use them when I'm feeling in a creative rut or want to get out and have some film fun and work in the black & white sphere!

Kentmere 100
Kentmere 100 is a wonderful budget film from Harman Technologies/Ilford Photo. But don't let the budget label scare you, because Kentmere 100 is a film that hits high above its price point. Yes, it doesn't have the finest grain out there but it has a lovely traditional grain structure. But that grain helps enhance the edge sharpness which combined with the wonderful tonal range of the film creates a delightful film that will deliver excellent results. Plus with the recent release of the film in 120 format makes it a great film that can fill out your film cataloge.

Nikon F5 - AF-S Nikkor 14-24mm 1:2.8G - Kentmere 100 @ ASA-100 - Kodak HC-110 Dil. B 5:45 @ 20CMamiya m645 - Mamiya-Sekor C 1:2.8 f=80mm - Kentmere 100 @ ASA-80 - SPUR HRX (1+20) 9:30 @ 20COlympus OM-10 - Olympus G.Zuiko Auto-W 1:3,5 f=28mm (Yellow-12) - Ketmere 100 @ ASA-100 - Flic Film Black/White & Green (1+49) 12:00 @ 20C (Constant Rotation)Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Kentmere 100 - Compard R09 Spezial (1+30) 9:00 @ 20C

Rollei RPX 25
Based on Agfa Avifoto 80, and probably is my favourite of all the films based on this surveillance film stock. While it also works well as Adox HR-50 and makes unique transparencies as Adox Scala 50. When you get to Retro 80s, it gets far too punchy. RPX 25 is a film rated at ASA-25, has excellent near-IR sensitivity and responds well to many different light. But what makes RPX 25 a cut above the other versions? You can get this in 35mm, 120, and 4×5 sheets! While not a film you take out all the time with a slow ASA-25 speed, it is a film for sunny days.

Pacemaker Crown Graphic - Fuji Fujinon-W 1:5.6/125 - Rollei RPX 25 @ ASA-25 - Pyrocat-HD (1+1+100) 12:00 @ 20CContax G2 - Carl Zeiss Biogon 28/2,8 T* - Rollei RPX 25 @ ASA-25 - Kodak D-76 (1+1) 8:00 @ 20CPentax 67II - SMC Pentax 67 1:2.4 105mm - Rollei RPX 25 @ ASA-25 - Ilford Ilfotec HC (1+63) 11:00 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 24mm 1:2.8 - Rollei RPX 25 @ ASA-25 - Adox Scala Developer (1+1) 10:45 @ 20C

Adox CHS 100 II
The return of the classic! CHS 100 II is a reformulated and reintroduced version of Efke KB100, which is based on an original Adox film stock. CHS 100 II is similar to the original one but has a more robust emulsion and has a bit more latitude. It offers up an old school look with a bit more grain than modern 100-speed films. The one thing I did notice with this film is that it doesn't do well in high-contrast conditions, you'll loose a lot of shadow detail. So you can probably shoot it at ASA-80 or ASA-64 to help open up those shadows when you develop, don't pull in development. You can get this in 35mm and 4×5, although I would love to see Adox bring it back in the 120 format. While you can use this with any developer, for the best results I recommend Adox FX-39 II.

Canon AE-1 - Canon Lens FD 28mm 1:2.8 - Adox CHS 100 II @ ASA-80 - Adox Atomal 49 (1+1) 9:00 @ 20C (Constant Rotation)Graflex Crown Graphic - Fuji Fujinon-W 1:5.6/125 - Adox CHS 100 II @ ASA-100 - Adox Atomal 49 (Stock) 5:45 @ 20CKonica-Minolta Maxxum 70 - Minolta Maxxum AF 35-70mm 1:4 - Adox CHS 100 II @ ASA-100 - Adox FX-39 II (1+9) 7:00 @ 20CCrown Graphic - Schneider-Kreuznack Xenar 1:4,7/135 - Adox CHS 100 II @ ASA-100 - Kodak Xtol (1+1) 7:15 @ 20C

ORWO UN54+ (Lomography Potsdam)
ORWO is a strange company these days. While tracing itself to the original Agfa company and then reformed on the eastern side of the iron curtain. The company's current iteration has been in hot water of late, especially the owner. All that aside, UN54+ is a beautiful film with tonnes of tonality, fine grain and excellent sharpness. Plus, if you get it from Lomography, you can order it in 35mm and 120. It loves D96 and handles other developers well. But honestly, for best results, a Pyro developer or D96, and you'll be happy.

Mamiya m645 - Mamiya-Sekor C 1:2.8 f=80mm - Lomography Potsdam 100 @ ASA-100 - Kodak HC-110 Dil. E 6:00 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Lomography Potsdam 100 @ ASA-100 - Blazinal (1+50) 9:30 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Lomography Potsdam 100 @ ASA-100 - Pyrocat-HD (1+1+100) 10:00 @ 20CMamiya m645 - Mamiya-Sekor C 1:2.8 f=80mm - Lomography Potsdam 100 @ ASA-100 - Cinestill D96 (Stock) 6:00 @ 20C

Fomapan 100
Along the same lines as Kentmere 100, Fomapan 100 is an excellent budget film. But it has a look that's different from Kentmere 100, its a classic film with a classic look. It has an excellent edge sharpness, but is a little more fine-grain than Kentmere 100 but it also depends on how you develop the film. It has a good tonality, but can get pretty crunchy under high-contrast situations. Plus you can get this film under multiple boutique and budget brands. So even if you cannot get the Foma branded stuff, there are plenty of other ways to get your hands on the stock. Fomapan 100 is also avaliable in 35mm, 120, and sheet films.

Leitz Leica M4-P - 7Artisans DJ-Optical 35/2 - Fomapan 100 @ ASA-100 - Foma Retro Special (Stock) 4:00 @ 20CMamiya C220f - Mamiya-Sekor 1:2.8 f=80mm - Fomapan 100 @ ASA-100 - 510-Pyro (1+100) 8:30 @ 20CNikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 100 @ ASA-100 - Ilford Microphen (1+1) 9:00 @ 20CHasselblad 500c - Carl Zeiss Planar 80mm 1:2.8 - Fomapan 100 @ ASA-100 - Kodak D-23 (Stock) 10:00 @ 20C

Top Five Favourite Colour Films (C-41 & E-6)
I don't shoot a lot of colour film, I find it difficult to scan and getting it processed is a bit of a drag. I can and have processed colour at home, but because the kits last for several rolls I usually will wait until I have a huge backlog then spend the next couple of evenings running everything through. If I take it to the lab I'm looking at at least a week turn around if I can take the time to drop the rolls off. And colour slide is still a mail out process. Plus, colour film is not the cheapest way to shoot film these days. But these are some of my favourite colour films I've reviewed.

Kodak Ektachrome E100
Regarding slide film, I have always been more of a Fujifilm shooter. But with Fujifilm cutting or reducing the production of many of their E-6 films, the reintroduction of Ektachrome E100 made me sit up and look. I have shot plenty of Ektachrome, including E100G and E100VS. So when Kodak said that the new E100 would take the best of both those film stocks, I was excited. I don't see myself using this again due to increased prices and the struggle to shoot enough to make it worthwhile for an E-6 kit or to send it out to a lab and have a good month's turnaround. I will recommend this to someone wanting to start shooting slide films. It's forgiving for a slide with decent latitude and has a beautiful rich colour replication and excellent edge-sharpness. Plus it looks fun when cross-processed using the ECN-2 process.

Nikon F5 - AF Nikkor 35mm 1:2D - Kodak Ektachrome E100 @ ASA-100 - Processing By: Boréalis PhotolabMinolta Maxxum 9 - Minolta Maxxum AF 28mm 1:2.8 - Kodak Ektachrome E100 @ ASA-100 - Processing By: Boréalis PhotolabMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Kodak Ektachrome E100 @ ASA-100 - Unicolor Rapid E-6 KitMinolta Maxxum 9 - Minolta Maxxum AF 28mm 1:2.8 - Kodak Ektachrome E100 @ ASA-100 - Unicolor Rapid E-6 Kit

Kodak Portra 400
Okay, I don't shoot a lot of Portra anymore; the biggest reason it is hard to find is that everyone wants to shoot Portra 400. The second is that it costs so much money when you find it; I tend to leave it for those who live and breathe nothing but Portra 400. Yet, this is probably the most accessible professional film for the average photographer, especially for those who are moving to film from digital. Portra 400 is a film you can abuse and shoot almost like your digital camera, adjusting the sensitivity between shots and then processing it normally. While it doesn't have as wide a range as digital, you can shoot Portra 400 between 100 and 1600 without pushing and pulling during processing. The colours will change depending on the EI and processing, but generally, they are pleasing. More pastel and soft with over-exposure and punching with under-exposure, and relatively accurate when shot at the box speed. It's a good film, one I would use for jobs where the client insisted on colour film but not for everyday shooting; for that, I would go with Ultramax 400.

Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Kodak Portra 400 @ ASA-400 - Processing By: Burlington CameraMinolta Maxxum 9 - Minolta Maxxum AF 50mm 1:1.7 - Kodak Portra 400 @ ASA-800 - Processing By: Burlington CameraHasselblad 500c - Carl Zeiss Planar 80mm 1:2.8 - Kodak Portra 400 @ ASA-400 - Processing By: Burlington CameraRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Kodak Portra 400 @ 1600 - Processing By: Silvano's

Eastman-Kodak Vision3 250D
Regarding colour film, other than Areocolor IV, the most affordable way to shoot colour is to go to the Kodak Vision3 series of films; of the four stocks available, my hands-down favourite is 250D. This lovely mid-speed film has a lot of latitude and does a beautiful job replicating colours. It isn't weird like 200T or 500T that requires extensive colour grading and filtering to work in daylight, you get excellent results right from the scanner, and you can shoot it over or under a stop without any loss when processing normally. The downside is that it comes with a remjet layer, so only specific labs can handle that and the ECN-2 process. But you can get it with this layer removed or never put it in place during manufacturing.

Nikon FE2 - AI Nikkor 28mm 1:3.5 - Kodak Vision3 5207 250D @ ASA-250 - FPP Super Color Negative ECN-2 KitNikon FE2 - AI Nikkor 28mm 1:3.5 - Kodak Vision3 5207 250D @ ASA-250 - FPP Super Color Negative ECN-2 KitNikon FE2 - AI Nikkor 28mm 1:3.5 - Kodak Vision3 5207 250D @ ASA-250 - FPP Super Color Negative ECN-2 KitNikon FE2 - AI Nikkor 28mm 1:3.5 - Kodak Vision3 5207 250D @ ASA-250 - FPP Super Color Negative ECN-2 Kit

Kodak Ultramax 400
It was hard to figure out which film to fill this spot, it was a close match between Gold 200 and Ultramax 400, but in the end, it was how Ultramax 400 looked at ASA-200 and normally developed that sold it for me. But don't just shoot it one stopover; it performed beautifully at box speed and one stop under. It's the perfect well-rounded consumer film I recommend to new shooters over Portra 400. The problem is that supply is hard to come by, and the cost is rising. But if you do find it, you are in for a treat. I consider this film superior to Portra 400; the colours look better.

Nikon FA - AI-S Nikkor 35mm 1:2.8 - Kodak Ultramax 400 @ ASA-200 - Processing By: Burlington CameraNikon FA - AI-S Nikkor 35mm 1:2.8 - Kodak Ultramax 400 @ ASA-200 - Processing By: Burlington CameraPentax Espio 115m - Pentax Zoom Lens 38-115mm 1:3.9-10.5 - Kodak Ultramax 400 @ ASA-400 - Processing By: Burlington CameraMinolta Maxxum 9 - Minolta Maxxum AF 28-135mm 1:4-4.5 - Kodak Ultramax 400 @ ASA-800 - Processing By: Burlington Camera

SantaColor 100 (Kodak Areocolor IV)
The "New" kid on the block, while it isn't really new but rather newly available. Kodak Areocolor IV is designed as an aerial surveillance film that can be processed in either C-41 (Colour Negative) or E-6 (Colour Slide) because it lacks the orange mask that is a type of negative film. Plus, it is a fresh film and continues to be produced. The problem in the past has been that it can only be purchased in large bulk rolls, making it difficult for even home bulk loaders to split it down. Enter several companies who started rerolling this under various house brands. You have SantaColor 100, FlicFilm Electra 100, FilmWashi X, and Luminar 100. Plus, who knows how many others! This is a fun colour film that I can get behind as it produces a beautiful warm colour with plenty of latitude. It works best between ASA-125 and ASA-200, rather than the 'box' speed of ASA-100, which blows out the images.

Minolta Maxxum 9 - Minolta Maxxum AF 28-135mm 1:4-4.5 - KameraStore SantaColor 100 @ ASA-50 - Processing By: Burlington CameraMinolta Maxxum 9 - Minolta Maxxum AF 28-135mm 1:4-4.5 - KameraStore SantaColor 100 @ ASA-100 - Processing By: Burlington CameraMinolta Maxxum 9 - Minolta Maxxum AF 28-135mm 1:4-4.5 - KameraStore SantaColor 100 @ ASA-200 - Processing By: Burlington CameraMinolta Maxxum 9 - Minolta Maxxum AF 28-135mm 1:4-4.5 - KameraStore SantaColor 100 @ ASA-400 - Processing By: Burlington Camera

Five Most Difficult Films
Sometimes there are films that are difficult to nail down. And while these aren't bad films, I've just had trouble getting them to a point that I'm happy with the results. And while I have managed to figure some films out (see the next section), others continue to elude my efforts. Now I haven't given up on these films and in some cases I do keep on trying to get results that I like out of them, but others I have given up on.

FilmWashi Type D
Washi D surprised me in a couple of ways, the first being that despite having a box speed of ASA-500, the images are fine-grained and sharp. Probably because this is a surveillance film stock that is designed to give exacting details for intelligence agents. The second is how crazy the images got when you added a yellow filter. With a deep yellow filter you get dramatically dark skies and even a pale yellow there is significant darkening. That said, this film drove me crazy with the paper thin emulsion that I ruined one roll and nearly ruined a second. It also does not handle overcast conditions, strange for a 500-Speed film and dislikes HC-110/Ilfotec HC. Although in the case of Ilfotec HC, I think I could have extended the development at least a minute and a half to help bring out the shadow details. That said, Type D is no longer available as it is sourced from Russia and since the illegal invasion and ongoing war in Ukraine is not sold by Washi.

[](https://www.flickr.com/photos/axle81401/50162308641/in/dateposted-public/ "FRB No. 64 - Film Washi "D" - Roll No. 1 (Kodak D-76)")Nikon F5 - AF Nikkor 35mm 1:2D (Yellow-15) - FilmWashi Type D @ ASA-500 - Kodak D-76 (1+1) 8:30 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 28mm 1:2.8 (Yellow-12) - Film Washi D @ ASA-500 - Ilford Ilfotec HC (1+63) 8:00 @ 20C[](https://www.flickr.com/photos/axle81401/50165890966/in/dateposted-public/ "FRB No. 64 - Film Washi "D" - Roll No. 2 (Rodinal)")Olympus OM-2n - Olympus G.Zuiko Auto-W 1:3.5 f=28mm (Yellow-12) - FilmWashi D @ ASA-500 - Blazinal (1+50) 11:00 @ 20C

Agfa Copex Rapid
Of all the films I have faced difficulties with, Copex Rapid is the one that I certainly will want to try again. The problem is that the film itself can be difficult to source, but the real trouble is the dedicated developer cannot be found in North America and costs a lot of money and will take a long time to ship from Europe. And the type of photography Copex Rapid is aimed at I don't practice. But it does perform well with regular developers under bright conditions. This is a fair weather film, it loves bright sunlight, and needs exacting exposure.

Mamiya m645 - Mamiya-Sekor C 45mm 1:2.8 N - Agfa Copex Rapid @ ASA-25 - Ilford ID-11 (Stock) 5:00 @ 20CNikon FE2 - AI Nikkor 24mm 1:2.8 - Agfa Copex Rapid @ ASA-50 - Adox Rodinal (1+100) 18:00 @ 20CMamiya m645 - Mamiya-Sekor C 45mm 1:2.8 N - Agfa Copex Rapid @ ASA-64 - 510-Pyro (1+300) 20:00 @ 21CNikon FE2 - AI Nikkor 24mm 1:2.8 - Agfa Copex Rapid @ ASA-50 - Adox FX-39 II (1+19) 9:00 @ 20C

Adox CMS 20 II
I caught a lot of flack for this film stock, CMS 20 II is a closed imaging system, which is to say it works with only one developer, Adotech IV. Now I'm not one for a closed system, especally with a B&W film, so I wanted to try and use other developers. Also it was near impossible to get bottles of Adotech IV when I completed this review. Now I did get workable results from most of the developers I used, D-76, Rodinal, and Pyrocat-HD. The best results I got are from TMax Developer. I did go back and revisit this film twice, once with Adotech IV and again with the Adox Scala Reversal Kit. In both cases, I don't know what happened but I could not get results good enough for publishing. Unlike some of the other films on this list, I won't be trying CMS 20 II again.

Pentax 645 - SMC Pentax A 645 35mm 1:3.5 - Adox CMS 20 II @ ASA-20 - Kodak TMax Developer (1+4) 5:30 @ 20CNikon F90 - AF-S Nikkor 14-24mm 1:2.8G - Adox CMS 20 II @ ASA-20 - Kodak D-76 (1+3) 10:30 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Adox CMS 20 II @ ASA-20 - Blazinal (1+100) 18:00 @ 20CNikon F5 - AF Nikkor 50mm 1:1.4D (CPOL) - Adox CMS 20 II @ ASA-12 - Pyrocat-HD (1+1+100) 9:00 @ 20C

Svema Foto 200
There are a lot of people who feel this film is special, and they aren't wrong. It's a wonderful film that provides amazing tonality and excellent sharpness. But it comes at a cost, there is way more grain with this film than I would expect from a 200-Speed film! Surprisingly it works best in Rodinal, and has less-visible grain than the other developers I tried it in, it also responds well to Kodak Xtol. But the real problem I have with Svema 200, is getting it loaded onto the reels. The paper thin negatives buckle at the slightest resistance and when working in a change bag, it heats up quickly and you get the film sweats. I don't have a need for Svema 200 in my current photography so I won't be returning to this film.

Nikon FA - AI-S Nikkor 35mm 1:2.8 (CPOL) - Svema Photo 200 @ ASA-200 - Kodak D-76 (Stock) 8:30 @ 20CNikon F5 - AF DC-Nikkor 105mm 1:2D - Svema Foto 200 @ ASA-200 - Blazinal (1+50) 14:00 @ 20CNikon F4 - AF Nikkor 35mm 1:2D - Svema Foto 200 @ ASA-200 - Kodak Xtol (1+1) 12:00 @ 20CMinolta Maxxum 9 - Minolta Maxxum AF 28mm 1:2.8 - Svema Foto 200 @ ASA-200 - Pyrocat-HD (1+1+100) 15:30 @ 20C

Foma Retropan 320
I really wanted to like Retropan, I think this film has a lot of potential to fill in a gap that is just enough different from Fomapan 400, but I can't get around the fact that the contrast is far to low in most developers! To get the best results, you do want to add some filtration and use the dedicated Retro Special developer. But once you start straying, you start to see a lot of muddy grain, displeasing low contrast, and an overall softness. It even didn't play well with Pyrocat-HD, and looks ugly in D-76 stock. I think it would do well in a high-contrast developer like LQR or D-19, but again, I don't see it a worthwhile effort when I have better results from Fomapan 400.

Mamyia m645 - Mamiya-Sekor C 35mm 1:3.5 N (Yellow-12) - Foma Retropan 320 Soft @ ASA-320 - Foma Retro Special Developer (Stock) 5:00 @ 20CMamyia m645 - Mamiya-Sekor C 35mm 1:3.5 N (Yellow-12) - Foma Retropan 320 Soft @ ASA-200 - Foma Fomadon LQN (1+10) 8:30 @ 20C (Constant Rotation)Mamiya m645 - Mamiya-Sekor C 45mm 1:2.8 N - Foma Retropan 320 @ ASA-320 - Kodak D-76 (Stock) 9:30 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Foma Retropan 320 @ ASA-320 - Pyrocat-HD (1+1+100) 11:30 @ 20C

Redeemed Films
I honestly have a drive to find the right way to shoot and develop a film. It might take a bit of time to discover the right combination to get results that I like, but it can be worth it and you discover a film that will work in odd situations or to give a look of yesteryear that isn't possible with modern film stocks.

Fomapan 400
Foma 400 is an interesting film. When I first heard about it, the film was not given the best reputation. Gritty, Grainy, Mushy. But when I reviewed the stock I saw that it had some potential. It took a lot of work to figure out how to get the best results from Fomapan 400. Some will say that it is not a true 400-Speed Film, but I do disagree with that statement now. Fomapan 400 is a beautiful film when shot at either 400, 800, or 200 and every point in-between. It's all about shooting the stock at the right speed and developing it right in the situation at hand. Fomapan 400 is a true classic film, it looks like the Tri-X of the 60s and 70s. Works well with high-contrast developers, compensating developers, and yellow filters. You can pick this stuff up in 120, 35mm, and sheet films. Along with various boutique and budget rebadges.

Mamiya C220f - Mamiya-Sekor D 1:3.5 f=105mm - Fomapan 400 @ ASA-200 - Ilford Ilfotec HC (1+31) 6:00 @ 20CNikon F5 - AF Nikkor 14mm 1:2.8D - Fomapan 400 - Foma Retro Special Developer (Stock) 6:00 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Fomapan 400 @ ASA-200 - Kodak D-76 (1+1) 9:00 @ 20CNikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 400 @ ASA-200 - Flic Film Black/White & Green (1+49) 12:00 @W film. P30 was a film that baffled me for a long time, a tough nut to crack. But I had to figure out the best conditions and development for the film. Then there was also the slight difference between the original Alpha release and the full production film stock. A delightful film that certainly gives a unique perspective. It loves light and medium contrast conditions, works best in run of the mill developers like D-96 and Xtol clones. While I haven't used the film in 120, I do plan on using it in that medium. Although if I had to choose between P30 and the newly released ORTO, I would pick ORTO.

Minolta Maxxum 9 - Minolta Maxxum AF 100mm 1:2.8 MACRO - FilmFerrania P30 @ ASA-80 - Cinestill D96 (Stock) 8:00 @ 20CNikon F5 - AF-S Nikkor 14-24mm 1:2.8G - FilmFerrania P30 @ ASA-80 - Adox XT-3 (Stock) 9:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D (Yellow-15) - Film Ferrania P30 @ ASA-50 - Kodak D-76 (Stock) 8:00 @ 20CNikon FE - AI-S Nikkor 35mm 1:2.8 - Ferrania P30 @ ASA-80 - Kodak HC-110 Dil. H 12:00 @ 20C

Kentmere 400
When I first reviewed Kentmere 400 I disliked it more than Fomapan 400. This was an ugly film, gritty, grainy, and mushy. But after Ilford released the film in 120 I started to get into the film a lot more. A budget friendly fast film that isn't Fomapan 400, and Kentmere 400 has a different look and feel. Like Foma 400, Kentmere 400 is a film that you need to develop and shoot right to get the best results. Compensating developers are a must, Tmax Developer, Atomal 49, and Studional (R09 Spezial/Hydrofin). And also, don't try over-exposing the film, it just goes grey and not in a good way. But you can push it a couple of stops and see some excellent results.

Nikon FE2 - AI-S Nikkor 35mm 1:2.8 - Kentmere 400 @ ASA-400 - Compard R09 Spezial (1+30) 8:00 @ 20CMamiya m645 - Mamiya-Sekor C 1:2.8 f=80mm - Kentmere 400 @ ASA-400 - Adox FX-39 II (1+9) 10:00 @ 20C (Constant Rotation)Leitz Leica M4-P - DJ-Optical 7Artisans 35/2 - Kentmere 400 @ ASA-400 - Adox Atomal 49 (1+1) 13:30 @ 20C (Constant Rotation)Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Kentmere 400 @ ASA-400 - Adox Atomal 49 (1+1) 13:30 @ 20C (Constant Rotation)

Fomapan 200
While I warmed up to Fomapan 400 it took me a lot longer to get used to Fomapan 200. I still don't think I'm 100% there with Foma 200. But I've always disliked most 200-speed films. But I'm certainly on the right path with Fomapan 200. The trouble is that it likes exotic developers, Pyro-Based, HR-DEV, Atomal 49, and others. My opinion of Fomapan 200 has certainly improved and it is a capable film I just haven't figured out the right spot for where I like the stock. I guess I still have a way to go with this film, but maybe using it on a Frugal Film Project cycle will help out?

Rolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Fomapan 200 @ ASA-200 - Compard R09 Spezial (1+30) 10:45 @ 20C (Constant Rotation)Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 200 @ ASA-100 - Pyrocat-HD (1+1+100) 7:30 @ 20CRolleiflex 2.8F - Carl Zeiss Planar 80mm 1:2.8 - Fomapan 200 @ ASA-125 - Adox HR-DEV (1+35) 12:00 @ 20CNikon FM - AI-S Nikkor 200mm 1:4 - Fomapan 200 @ ASA-200 - Kodak D-23 (Stock) 7:00 @ 20C

Rollei Superpan 200
Here's another 200-speed film, Superpan 200 is an interesting film stock that has a lot to offer. It has a unique look and feel that extends into the near-IR range. While I haven't tried it with a dedicated IR filter, but it looks amazing under a red filter and a high-contrast developer. Like Fomapan 200, it took me a while to get to know Superpan 200. It all started with a stand development in Rodinal. Now I'm not big on stand-development, but it gave me a starting point for what I want Superpan to look like. Then it was a matter of building from there, will it be a regular choice, no, but I at least know how to get it to the right spot.

Mamiya m645 - Mamyia-Sekor C 35mm 1:3.5 N (Red-25) - Rollei Superpan 200 @ ASA-200 - Kodak D-19 (1+1) 8:30 @ 20CMinolta XE-7 - Minolta MD Rokkor-X 45mm 1:2 - Rollei Superpan 200 @ ASA-200 - Kodak D-76 (1+1) 14:00 @ 20CNew Mamiya 6 - Mamiya G 1:3.5 f=75mm L - Rollei Superpan 200 @ ASA-200 - Adox FX-39 II (1+14) 15:15 @ 20C (Constant Rotation)Nikon Nikkormat EL - AI-S Nikkor 35mm 1:2.8 - Rollei Superpan 200 @ ASA-200 - Adox Atomal 49 (Stock) 10:30 @ 20C

Well that wraps up the first 100 reviews! Here's to another 100 reviews, but it may never reach that number. Sadly unlike cameras and lenses there is a finite number of film stocks out there, but hopefully I can at least get up to 150? And I do want to get my hands on more discontinued and expired film stocks to fill out some more reviews. Plus I have some ideas to add secondary reviews for film stocks already tested. Until then you can find a complete list of my reviews over on the dedicated page.

#filmreviewblogs #510pyro #adoxatomal49 #adoxchs100art #adoxchs100ii #adoxcms20ii #adoxfx39ii #adoxhrdev #adoxrodinal #adoxscaladeveloper #adoxxt3 #agfaapx25 #agfacopexrapid #agfarodinal #arsenalkiev88 #belliniecofilm #blazinal #canonae1 #canoneos3000 #cinestilld96 #compardr09spezial #eastmandoublex #eastmanvision3250d #efkekb100 #film #filmreview #filmferraniap30 #filmwashid #flicfilmblackwhitegreen #fomafomadonlqn #fomaretrospecialdeveloper #fomaretropan320 #fomapan100 #fomapan200 #fomapan400 #fotospeedfd10 #fppsupercolornegativeecn2kit #fujifilmastia100f #graflexcrowngraphic #graflexspeedgraphic #hasselblad500c #holga120n #ilforddelta100 #ilfordfp4 #ilfordhp5 #ilfordid11 #ilfordilfotechc #ilfordmicrophen #ilfordpanf #intrepid4x5mk1 #kamerastoresantacolor100 #kentmere100 #kentmere400 #kodakd19 #kodakd23 #kodakd76 #kodakektachromee100 #kodakhc110 #kodakkodachrome25 #kodakkodachrome40typea #kodakkodachrome64 #kodakpanatomicx #kodakportra400 #kodaktmaxdeveloper #kodakultramax400 #kodakxtol #konicaminoltamaxxum70 #kyoceracontaxg2 #leitzleicam4p #mamyiac220f #mamyiam645 #minoltamaxxum9 #minoltaxe7 #newmamyia6 #nikonf3 #nikonf4 #nikonf5 #nikonf90 #nikonfa #nikonfe #nikonfe2 #nikonfm #nikonnikkormatel #olympusom10 #olympusom2n #orwoun54 #pentax645 #pentax67ii #pentaxespio115m #pmkpyro #pyrocathd #review #rolleirpx25 #rolleisuperpan200 #rolleiflex28f #special #spurhrx #svemafoto200 #tetenalneofinblau #unicolorrapide6kit #zeissikoncontaxiiia #zenzabronicags1

Sixteen | White Oaks

It only took ten weeks to get to the founding of Oakville itself. Oakville is the product of William Chisholm's vision, Merrick Thomas's planning, and the hard work of those who did the hard work. And while today, construction is straightforward and mechanised, in the 1830s, everything had to be done by hand, and it took more than one person to build a community.

Graflex Crown Graphic - Fuji Fujinon-W 1:5.6/125 - Arista EDU.Ultra 400 @ ASA-200 - Ilford Ilfotec HC (1+47) 7:30 @ 20C

The land around the mouth of the Sixteen Mile Creek was ceded to the British Crown under Treaty 22 in 1822. Although it had been left in the stewardship of the Mississauga's during the 1805 Treaty 14 purchase, the area was still part of the Thomas Street Survey of 1806, designating the mouth as part of Lot 11, Concession IV, Trafalgar Township. Having submitted a successful proposal to the Province for constructing a shipyard, trade harbour, and townsite, Chisholm purchased the lot for a sum of £1,029 or 3,517$ (Canadian) in 2022. He authorised his son Robert and son-in-law Merrick Thomas to lay out a townsite plan that included a shipyard and harbour. Merrick built himself a simple frame house in 1829 and began the survey work. Much like the work to survey the township, surveying a townsite is done in the same manual manner. The townsite was contained within the modern borders of Rebbecca/Reynolds in the north, Allan in the east and Brock in the west. Streets were laid out in a grid pattern and divided into blocks; each block contained six quarter-acre lots. Lots were put up for sale in 1833; sales were on the condition that the purchaser constructs a frame, brick or stone house within eighteen months of the purchase. William retained ownership of the land around the creek mouth and, under the eye of Merrick and Robert, constructed a shipyard, sawmill, and store. The mouth was also dredged out, and piers were built for harbour purposes. Warehouses and a small community began to grow around the harbour. Stores, taverns, and inns soon followed, most centred around the intersection of Navy and Lakeshore (then Colborne). The name Oakville was chosen when the postal service arrived in 1835, named for the number of white oak trees, which was William's nickname. By 1851 the population hit 916, and it was incorporated as a town in 1857, with William's eldest son George elected as the first Mayor. But the collapse of the grain trade gutted the community as most of the economy was tied directly to that trade. But other industries took up the slack, and by 1871 the population hit 1,000. The community expanded north in 1913 with the Brantwood Survey, which expanded some 200,000 acres to Cornwall Road. In 1962 Oakville's reach was expanded as most of the Trafalgar Township was amalgamated into the town. Today the population sits at 240,000, the largest town in Ontario.

Today the Thomas House is one of the oldest surviving building in Oakville, Ontario. Completed in 1829, the house was saved from demolition by Hazel Chisholm and was one of two buildings that housed the original collection of the Oakville Museum. And it made the obvious choice to represent the initial survey of the town of Oakville. Today the museum is housed in a much larger location, but the house is open to the public in its home in Lakefront Park.

#sixteen #aristaeduultra400 #canada #canadianhistory #graflexcrowngraphic #history #ilfordilfotechc #localhistory #oakville #ontario

Film Review Blog No. 83 – Film Washi Type “I”

This month, we're sticking to an X-Ray theme with a new film stock from Film Washi. While I use the term 'new' only to indicate that it is a newly available stock through Film Washi. I found this film through the Film Photography Project Store through their email newsletter and was drawn to the fact it was available in 120 formats, so I jumped at the chance. The film stock was initially used for industrial non-destructive tests like welding quality checks. Being coated on each side of its thick blue polyester base and without an anti-halation layer will give the pictures a unique look. And after seeing the exciting results I got from last month's review of Washi F, I was looking forward to seeing something different.

Film Specs
Type: Orthochromatic X-Ray Film, B&W
Film Base: Blue Polyester, 175 μm
Film Speed: ASA-80
Formats Available: 120

Roll 01 - Ilford ID-11
The original Washi datasheets called for a development time of 4.5 minutes at a 1+1 dilution. This time and dilution struck me as odd for two reasons. The first reason is that the rule of thumb for development is that you need times above five minutes for consistent results, and the second is that short of a development time for a dilute mix doesn't add up. So I went with the HP5+ time of thirteen minutes. And I'm glad I did, although I wish I had bumped it a little more to say 14.5 minutes. I will assume that the datasheet is a misprint missing the 1. Thankfully in scanning, I recovered some of the images with a bit of heavy editing. I'm reasonably happy with the results, the grain is a little more noticeable than I expected, but the photos are clean, sharp, and have high contrast. I can see that ID-11/D-76 is an excellent choice for Washi I. Only make sure to meter for your shadows and give it that 14.5 minute time in the 1+1 dilution.

Mamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford ID-11 (1+1) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford ID-11 (1+1) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford ID-11 (1+1) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford ID-11 (1+1) 13:00 @ 20C

Roll 02 - Ilford Ilfotec HC
I stuck with my goto Ilfortec HC times for HP5+ for this time around, running with thirteen minutes at a 1+63 dilution. There was undoubtedly an improvement in my negatives, especially those where there wasn't much difference between the shadows and highlights. Going with the longer development time and a more dilute developer certainly helped along the way, and I think some extra time in the tank might have helped. The grain and sharpness are improved with Ilfotec HC; I believe the lower dilution helped also tame the contrast slightly. At this point, I think that Washi I has a limited latitude and given its original use, I'm not surprised, X-Ray film is designed to do one thing under tightly controlled conditions.

Mamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec HC (1+63) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec HC (1+63) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec HC (1+63) 13:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec HC (1+63) 13:00 @ 20C

Roll 03 - Adox Rodinal
Having seen poor results in the previous two negatives, I decided to change a couple of things this time around. Thankfully despite being incredibly cold the day I was out, the sun was bright direct and starting to pop up over the horizon. First of all, I pulled my trusty Pentax Spotmeter V out to handle the metering. I tried as best to run average metering, taking a reading from the highlights and then again from the shadows; most of the time, I had a nice, even five-stop difference. Still, I favoured my shadows being perfectly okay with sacrificing my highlights when I didn't. Secondly, I upped my development time, going with the HP5+ times for Rodinal at a 1+50 dilution. And the negatives looked much better, still not where I want them but certainly better. Sadly when scanning, the troubles came back, the images still seemed a little undercooked, and I'm still dealing with extreme contrast. Although the quality I do see is a sharp, fine-grained image with high contrast. And thankfully, all without any real increase in visible grain.

Mamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Adox Rodinal (1+50) 12:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Adox Rodinal (1+50) 12:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Adox Rodinal (1+50) 12:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Adox Rodinal (1+50) 12:00 @ 20C

Roll 04 - Ilford Ilfotec LC29
It was time to put everything together, it only took three rolls, but I think I have this film nailed. I again took out my Pentax Spotmeter V to handle the metering running averages between the shadows and highlights. Next, I went with the listed LC29 development times and upped the time by a minute and a half. And it worked. Finally, the negatives came out cleaner. However, we're not escaping that contrast. It's still there, and while certainly better and a much clearer picture of the film's actual contrast, it's high. However, you get a better idea of the film's orthochromatic nature; it seems to not see blue, again right in light with most other x-ray films. When you get past the moulting on the film, thanks to the backing paper and packaging. In LC29, you have no grain and sharp results.

Mamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec LC29 (1+19) 8:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec LC29 (1+19) 8:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec LC29 (1+19) 8:00 @ 20CMamiya m645 - Mamiya-Sekor C 35mm 1:3.5 N - Film Washi Type I @ ASA-80 - Ilford Ilfotec LC29 (1+19) 8:00 @ 20C

Final Thoughts
The Washi datasheets say that this film has a thick base; that is an understatement. The first roll I loaded onto the reel in the dark felt like cardstock, a departure for other Washi films. This film is easy to work within the dark bag and loads onto Paterson reels without any fighting. My Mamiya m645 handled the film well, although it struggled near the end of the roll, and the rolls seemed to be a bit fat after being wound up but didn't spill past the reel. Either way, I scotch-taped down the end tongue and put the film back in the container. And thankfully ended up without any light leaks or fogging. My one suggestion is that you need to watch which camera you load this into, the Mamiya, Pentax, and Hasselblads would handle the film well, but a box camera or even a TLR might struggle a bit with such a thick film base. If there's one thing that I finally figured out by the fourth roll, add 1.5 minutes to HP5+ times, have good accurate metering, and you'll get results each time. I've reviewed some trying films, and I can now add Washi I among those films. You'd have better luck working with Washi F and getting consistent results than Washi I, and I am glad to be done with the film.

Further Reading
Don't just take my word on Film Washi Type "I"; you can check out the reviews by other excellent reviewers!
No Other Reviews Found.

#filmreviewblogs #adoxrodinal #canada #film #filmreview #filmwashi #filmwashitypei #ilfordid11 #ilfordilfotechc #ilfordilfoteclc29 #mamiyam645 #media #medium #milton #oakville #ontario #review #sheridancollege #toronto #typei #washi

Camera Review Blog No. 143 – Nikon FE2

I remember the first time I learned about the Nikon FE2; it was one of the early episodes of the Film Photography Podcast, I can't remember which episode it was initially, but I do remember talking to him about the camera when I met up with him at one of the FPP recording sessions back in 2011. The camera didn't particularly interest me; I still had my Nikon F3. But the camera stuck in my head. And even though I have an FE, the FE2 is an excellent addition to the stable as it is a newer camera, a faster shutter, and the viewfinder is one of the brightest in my entire kit.

The Simple FE2 surrounded by a selection of manual focus Nikkor lenses.

Camera Specifications
Make: Nikon
Model: FE2
Type: Single Lens Reflex
Format: 135 (35mm), 36x24mm
Lens: Interchangable, Nikon F-Mount
Shutter: Electronic Titanium vertical-travel focal plane shutter, 8″ - 1/4000″ + Bulb
Meter: TTL Centre-Weighted, 2x Silicon Photo Diode sensors, EV1 ~ EV18 @ ASA-100, ASA-12 - ASA-4000
Year of Manufacture: 1987-2001

Background
Nikon, from the start, had been known for their mechanical offerings. The game-changing Nikon F introduced the idea of a system camera to the SLR and professional photographer market in 1959. The F, despite its flaws, proved a commercial success and the follow-up Nikon F2 in 1971 proved equally successful. But Nikon also produced an equally successful consumer line of cameras, the Nikkormat line. First released in 1965, the Nikkormat FT, FTn and FT2 were heavy-duty mechanical cameras that could use the same lenses as their professional cameras and included a built-in light meter system. But in 1972, Olympus decided to change the game and introduced the Olympus OM-1. The OM system took the idea of an SLR but downsized it, creating a compact but full-featured SLR. Plus, the rise of electronics and semi-automatic exposure control is coming out of Canon and Minolta. Nikon's answer was the Nikkormat EL. Released in 1972, the EL took advantage of the Copal Square shutter allowing for both manual and aperture priority exposure metering. Nikon released an updated version, the EL2, which could accept the new AI lenses and replaced the CdS cells with Silicon Blue Cells for metering. The Nikkormat EL2 and partner Nikkormat FT3 were short-lived as Nikon decided to create a more unified look to their cameras. Taking a new smaller chassis size, and dropping the Nikkormat name, the FT3 became the Nikon FM and the EL2 became the FE, released in 1977 and 1978 respectively. And while the new lineup of cameras was successful in the market, the research team at Nikon were already looking towards the future. Canon's A-1 introduced the idea of an electronic program mode and Olympus OM-4 with an early form of matrix metering. And there was also the matter of producing a faster top shutter speed. In 1982 Nikon released their new FM2, which featured a shutter with a top speed of 1/4000″ through the use of titanium for the shutter curtain. The Matrix meter, a system that used twenty-four SPD cells fed into a single chip, or Automatic multi-program Chip (AMP), combines that with the new faster shutter that was supposed to be the FE2. Instead, that went into the Nikon FA and the FE2 came out in 1987 with the same semi-automatic exposure as before but with the faster shutter. The Nikon FE2 proved a capable camera with new interchangeable focusing screens and a bright viewfinder; Simultaneously, it retained the same match-needle readout; some LEDs in the viewfinder indicated any EV adjustment. Nikon produced only two versions of the FE2, a chrome and a black version, and no special editions or variants were released. Production of both the FE2 and FM2n ended in 2001, but the body style saw a revival with 2006's Nikon FM3a and the influence is seen with the Nikon D f.

Nikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20C

Impressions
If you're familiar with any of the compact series of Nikon SLRs, then the FE2 will be a familiar sight. These are classic and iconic cameras and probably some of the most handsome of all the Nikon's in its simplicity. Probably the most significant and most visible change is the inclusion of the camera model on the front of the camera. While the FE was a small engraving on the camera's rear, the FE2 shouts it loud and proud in the typical block Nikon font that carries on to this day on some models. Most FE to the FE2 is internal, with some external differences. One of the first things you'll notice about the FE2 is that there's no more battery check leaver and light. The second is that the film speed dial has been improved; no more tiny hard to press buttons are needed to release the lock. Instead, you have the traditional lift and turn interface. The small button is still there, but it's far easier to push and control the EV compensation, with settings for +/- two stops in 1/3 stops. The shutter release is also enlarged and is surrounded by a metal collar. Beyond that, all the other controls are the same as the original FE. Internally the camera is entirely different with improved metering, a faster shutter with a top speed of 1/4000″ and a shutter sync speed of 1/250″, which also acts as the mechanical backup for the FE2. The FE2 will also accept both the MD11 and MD12 motor drives, and the hot shoe will accept proprietary Nikon flashes for TTL metering.

Nikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Ilford HP5+ @ ASA-400 - LegacyPro L110 (1+31) 6:30 @ 20C

Experiences
If you've worked with Nikon's previous compact SLR offerings, then the FE2 will be a familiar camera. There's no learning curve with these cameras; you can immediately pick one up and know what to do. Probably the most significant improvement over the FE is the big bright viewfinder; I would probably say it's close to 100% coverage and on the same level of brightness as my Minolta Maxxum 9. Even with the grid focusing screen, the FE2 is easy to focus on in almost any lighting condition. The one thing that I find interesting is that they stuck with a standard needle style display for the metering, although the EV adjustment is displayed by LED. Film loading is quick and easy, and having that nice short throw on the film advance helps if you need to shoot fast but don't want to have that MD-12 installed. Once you're in the field, the camera becomes an extension of your hands. It almost becomes transparent, allowing you to focus on image creation. While it is aperture priority metering, I usually find I set the aperture and then have fun; the viewfinder makes things easy with everything I need visible. And then, as Nikon said with the D f , nothing but pure photography. I don't like anything about the FE2, no quirks or oddities. Honestly, it's probably the closest thing to a perfect camera that I've come across. Rewinding is quickly done once the film is done, and mounting the lens requires no special dance.

Nikon FE2 - AI-S Nikkor 35mm 1:2.8 - Eastman Double-X @ ASA-100 - Ilford Ilfotec HC (1+63) 8:00 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Eastman Double-X @ ASA-100 - Ilford Ilfotec HC (1+63) 8:00 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Eastman Double-X @ ASA-100 - Ilford Ilfotec HC (1+63) 8:00 @ 20CNikon FE2 - AI-S Nikkor 35mm 1:2.8 - Eastman Double-X @ ASA-100 - Ilford Ilfotec HC (1+63) 8:00 @ 20C

Optics
Like any manual focus Nikon camera, the available optics are near legendary. The best options for the FE2 are any AI or AI-S lens in manual focus; these will pair perfectly with your FE2. In a pinch, any AF Type-D lenses, those with the aperture ring, will work perfectly on your FE2 also, although focusing might be tricky. Depending on the focusing screen on your camera, you will want a lens that has decent resistance to your focusing ring. I find that the focusing rings are a bit too loose for a focusing screen without a split prism on the autofocus lenses. And with the size of the camera, a longer lens without having a motor drive may throw off the balance of the camera. One thing to note is that Nikon dropped compatibility with pre-AI lenses between the FE and the FE2; your follower lug is fixed in place and can't be flipped up. Mounting your pre-AI lenses could cause damage to your camera. If you're starting your manual focus AI/AI-S lens kit for an FE2, a good starter kit includes a Nikkor 28mm f/3.5, Nikkor 50mm f/1.8 (Pancake), and Nikkor 105mm f/2.5. If you're looking to expand your equipment, maybe the Nikkor 24mm f/2.8, Nikkor 35mm f/2.8, and Nikkor 200mm f/4 will expand your capabilities.

Nikon FE2 - AI-S Nikkor 50mm 1:1.4 - Fujifilm Neopan Acros 100 @ ASA-100 - Ilford Ilfotec LC29 (1+19) 5:00 @ 20CNikon FE2 - AI-S Nikkor 50mm 1:1.4 - Fujifilm Neopan Acros 100 @ ASA-100 - Ilford Ilfotec LC29 (1+19) 5:00 @ 20CNikon FE2 - AI-S Nikkor 50mm 1:1.4 - Fujifilm Neopan Acros 100 @ ASA-100 - Ilford Ilfotec LC29 (1+19) 5:00 @ 20CNikon FE2 - AI-S Nikkor 50mm 1:1.4 - Fujifilm Neopan Acros 100 @ ASA-100 - Ilford Ilfotec LC29 (1+19) 5:00 @ 20C

Lowdown
Yes, it is easier and cheaper to purchase an original FE but hear me out. The FE2 is a newer camera and fixed and improved upon the original FE in several ways. And while you will be paying more for an FE2, they are certainly a more affordable option than the FM2(n) or FM3a and deliver the same level of accuracy in exposure and optical qualities. Overall the FE2 is a capable camera for anyone looking for a good aperture priority camera, maybe as a second body to an F3? Battery-wise, the FE2 uses the same LR44 and, despite driving both the metering system and shutter, last for a long time. And the FE2 can still be repaired by a knowledgeable repair person making it even better to purchase. On the used market, the FE2 runs from between 250$ to 350$. However, some are going for under 200$ and others for over 500$ making it surprisingly affordable compared to its mechanical cousin. Will I be getting rid of my FE? Probably not; I can always keep it as a backup to the FE2. Alternatively, it can be turned into a Presspan. But I can certainly see the FE2 becoming a common camera in my reviews and personal photography.

Video Review Coming - June 2022

Further Reading
Don't just take my word on the FE2, you can check out the reviews by other excellent camera reviewers!
Emulsive - Camera Review: The Nikon FE2
Casual Photophile - Nikon FE2: (Almost) My Favourite Nikon SLR
Ken Rockwell - Nikon FE2 Review
5050 Travelog - Nikon FE2 Review
Filtergrade - The Nikon FE2 Review
CameraGX - The Nikon FE2: one of the very best manual focus SLRs ever

#camerareviewblogs #camera #camerareview #campbellville #canada #eastmandoublex5222 #ecdruryschoolforthedeaf #fujifilmneopanacros100 #gear #ilfordhp5 #ilfordilfotechc #ilfordilfoteclc29 #legacyprol110 #milton #mountsburgconservationarea #nikkor #nikon #nikonfe2 #ontario #review

Film Review Blog No. 82 – Film Washi Type “F”

When it comes to Film Washi, they certainly have gotten their hands on some interesting film stocks. And after enjoying some of their products last year, one of their products I've wanted to try. But with any repurposed film stock, you have to wait for the raw materials to become available. Thankfully after watching out on the Film Photography Project's store I saw them come back in stock thanks to their email newsletter. Type "F" is a special X-Ray film used for mass lung disease diagnoses; according to the Film Washi website, it is truly a unique film that offers, coated without an anti-halation layer, a high diffusion effect beautiful grain.

Film Specs
Type: Orthochromatic X-Ray Film, B&W
Film Base: Polyester, 100 μm
Film Speed: ASA-100
Formats Available: 135 (35mm)

Roll 01 - Ilford ID-11
I didn't know what to expect from these negatives; they looked decent, a bit dense, but nothing too terrible out of the tank. Silverfast, however, made the initial pre-scan look overcooked. Thankfully once I got the frames set up, things started to look better. There is undoubtedly an ethereal quality to these images, a soft fuzziness around the edges. Almost as if you're looking through the world with dirty glasses. You do lose your highlights but get excellent shadow details. Probably the one thing that caught my attention is how grainy the film is, not that I'm complaining; we are talking cut down x-ray film here, so a bit of grain is to be expected. But the images have an excellent sharpness about them, which only adds to the film's overall feel. And for a first roll, I think I'm going to enjoy the film moving forward.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20C

Roll 02 - Ilford Ilfotec HC
After seeing the results, I got with the first roll. I decided to play off my strength and see if I could push the film towards that same ethereal look. Rather than go with the dilution and time on the Washi datasheets, which called for 4.5 minutes in a dilution of 1+15 (Dilution A). I felt that the time was too short and the dilution too strong. Thankfully, Washi tells you an alternative source for times, so I went with a sixteen minute time in 1+63 (Dilution H). Although the film probably would have done better in either the 1+15 or 1+31 dilutions, it would have bumped up the contrast. I am, however, happy with the results I got; you got that same ethereal glow about the images and a certain drop in the visibility of the grain; I did have to dial things back in editing, so maybe drop the development time to fifteen minutes or go with a more substantial dilution.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20C

Roll 03 - Adox Rodinal
I'll admit I was torn when picking a development using Rodinal. On the one hand, I knew that I would get some increased amount of grain no matter which dilution I went, but I wanted to see a bit more contrast from Washi F. In the end, I went with a tried and listed time, going with a 1+25 dilution for nine minutes. After pulling them from the tank, the negatives looked like the rest, which is a good sign. They are a bit overcooked; thankfully, a bit of work in post-processing did drag a bit of detail back out of those highlights. Some of the times are a little off on the datasheet, and I would go with at least one minute less on all listed times.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20C

Roll 04 - Flic Film Black/White & Green
The joy of running these films sequentially is that I can make adjustments as I go along with developing the rolls. In the case of this last roll, I took my advice and went with one minute left on development. Here I went for the FP4+ times again and used the Flic Film Black/White & Green, which is liquid Xtol, hoping it might tame the film. Sadly it did not, and despite shooting under wildly different lighting conditions, the film came out of the tank looking like every other roll. In fact, despite being developed by four different developers, everything looked the same. There's the same ethereal look to the images, loss of highlights, tonnes of grain and sharpness.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20C

Final Thoughts
Washi F is not for the faint of heart; it's a film that has specific tolerances and has very little in the way of forgiveness when outside those tolerances. And that isn't surprising for me, it is a film with a single purpose, and here I am taking it well outside that purpose. An X-Ray camera does one thing well and does it the same every time. On that side, if you're into this look, then Washi F will give you a fun film to experiment with ethereal portraits and landscapes and certainly makes you embrace the grain. And no matter what you develop the film in, it will look the same. The one thing I did note with his film is how difficult the handle is. The first thing is that the base is thin, not super light like other Washi films, but thin enough to give my F5 some headaches when loading. The second is handling when loading onto plastic reels, the first roll through bound a little during the process. Thankfully, I kept the film rolling with a bit of luck and a touch of violence. The thin base did allow the film to dry flat, but it did tend to roll upon itself. It also tends to suffer from light piping, so keep the roll inside the canister until you're ready to use it and load in dim light. The canister recommends shooting six frames, but four seems to do the trick. If you're looking for Washi F, it can be challenging to obtain as Washi is a small company out of France, thankfully they have a long reach, you can find a complete list of retail partners over on the Film Washi site.

Further Reading
Don't just take my word on Film Washi Type "F", you can check out the reviews by other awesome reviewers!
Emulsive - 5 Frames with Film Washi Type F
Analogue Wonderland - Washi F Film Review
Filtr Film Cameras - Film Review - Washi F

#filmreviewblogs #adoxrodinal #canada #film #filmreview #filmwashi #filmwashitypef #flicfilmblackwhitegreen #hamilton #ilfordid11 #ilfordilfotechc #media #medium #milton #nikonf5 #ontario #review #rockton #toronto #typef #washi #westfieldheritagevillage

Film Review Blog No. 82 – Film Washi Type “F”

When it comes to Film Washi, they certainly have gotten their hands on some interesting film stocks. And after enjoying some of their products last year, one of their products I've wanted to try. But with any repurposed film stock, you have to wait for the raw materials to become available. Thankfully after watching out on the Film Photography Project's store I saw them come back in stock thanks to their email newsletter. Type "F" is a special X-Ray film used for mass lung disease diagnoses; according to the Film Washi website, it is truly a unique film that offers, coated without an anti-halation layer, a high diffusion effect beautiful grain.

Film Specs
Type: Orthochromatic X-Ray Film, B&W
Film Base: Polyester, 100 μm
Film Speed: ASA-100
Formats Available: 135 (35mm)

Roll 01 - Ilford ID-11
I didn't know what to expect from these negatives; they looked decent, a bit dense, but nothing too terrible out of the tank. Silverfast, however, made the initial pre-scan look overcooked. Thankfully once I got the frames set up, things started to look better. There is undoubtedly an ethereal quality to these images, a soft fuzziness around the edges. Almost as if you're looking through the world with dirty glasses. You do lose your highlights but get excellent shadow details. Probably the one thing that caught my attention is how grainy the film is, not that I'm complaining; we are talking cut down x-ray film here, so a bit of grain is to be expected. But the images have an excellent sharpness about them, which only adds to the film's overall feel. And for a first roll, I think I'm going to enjoy the film moving forward.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford ID-11 (1+1) 11:00 @ 20C

Roll 02 - Ilford Ilfotec HC
After seeing the results, I got with the first roll. I decided to play off my strength and see if I could push the film towards that same ethereal look. Rather than go with the dilution and time on the Washi datasheets, which called for 4.5 minutes in a dilution of 1+15 (Dilution A). I felt that the time was too short and the dilution too strong. Thankfully, Washi tells you an alternative source for times, so I went with a sixteen minute time in 1+63 (Dilution H). Although the film probably would have done better in either the 1+15 or 1+31 dilutions, it would have bumped up the contrast. I am, however, happy with the results I got; you got that same ethereal glow about the images and a certain drop in the visibility of the grain; I did have to dial things back in editing, so maybe drop the development time to fifteen minutes or go with a more substantial dilution.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Ilford Ilfotec HC (1+63) 16:00 @ 20C

Roll 03 - Adox Rodinal
I'll admit I was torn when picking a development using Rodinal. On the one hand, I knew that I would get some increased amount of grain no matter which dilution I went, but I wanted to see a bit more contrast from Washi F. In the end, I went with a tried and listed time, going with a 1+25 dilution for nine minutes. After pulling them from the tank, the negatives looked like the rest, which is a good sign. They are a bit overcooked; thankfully, a bit of work in post-processing did drag a bit of detail back out of those highlights. Some of the times are a little off on the datasheet, and I would go with at least one minute less on all listed times.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Adox Rodinal (1+50) 15:00 @ 20C

Roll 04 - Flic Film Black/White & Green
The joy of running these films sequentially is that I can make adjustments as I go along with developing the rolls. In the case of this last roll, I took my advice and went with one minute left on development. Here I went for the FP4+ times again and used the Flic Film Black/White & Green, which is liquid Xtol, hoping it might tame the film. Sadly it did not, and despite shooting under wildly different lighting conditions, the film came out of the tank looking like every other roll. In fact, despite being developed by four different developers, everything looked the same. There's the same ethereal look to the images, loss of highlights, tonnes of grain and sharpness.

Nikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20CNikon F5 - AF Nikkor 35mm 1:2D - Film Washi Type F @ ASA-100 - Flic Film Black/White & Green (1+49) 11:45 @ 20C

Final Thoughts
Washi F is not for the faint of heart; it's a film that has specific tolerances and has very little in the way of forgiveness when outside those tolerances. And that isn't surprising for me, it is a film with a single purpose, and here I am taking it well outside that purpose. An X-Ray camera does one thing well and does it the same every time. On that side, if you're into this look, then Washi F will give you a fun film to experiment with ethereal portraits and landscapes and certainly makes you embrace the grain. And no matter what you develop the film in, it will look the same. The one thing I did note with his film is how difficult the handle is. The first thing is that the base is thin, not super light like other Washi films, but thin enough to give my F5 some headaches when loading. The second is handling when loading onto plastic reels, the first roll through bound a little during the process. Thankfully, I kept the film rolling with a bit of luck and a touch of violence. The thin base did allow the film to dry flat, but it did tend to roll upon itself. It also tends to suffer from light piping, so keep the roll inside the canister until you're ready to use it and load in dim light. The canister recommends shooting six frames, but four seems to do the trick. If you're looking for Washi F, it can be challenging to obtain as Washi is a small company out of France, thankfully they have a long reach, you can find a complete list of retail partners over on the Film Washi site.

Further Reading
Don't just take my word on Film Washi Type "F", you can check out the reviews by other awesome reviewers!
Emulsive - 5 Frames with Film Washi Type F
Analogue Wonderland - Washi F Film Review
Filtr Film Cameras - Film Review - Washi F

#filmreviewblogs #adoxrodinal #canada #film #filmreview #filmwashi #filmwashitypef #flicfilmblackwhitegreen #hamilton #ilfordid11 #ilfordilfotechc #media #medium #milton #nikonf5 #ontario #review #rockton #toronto #typef #washi #westfieldheritagevillage

Foma:52 – Fifty-Two Weeks, Fifty-Two Images

Well, we've come to the end of another fifty-two roll project, and in proper form, I'm going to present my favourites from each week. Unlike previous projects, I started to build a final photo book of all my favourite images. And that I why I started working on this post at the beginning of February 2021, and each month I collected my favourites and posted them here and wrote out their pieces for the month. So that even with such a vast catalogue of images, I could quickly get the book to print. So without further delay, I give you my choices for the best of the year.

Week 01 - Royal City - The inclusion of the Basilica of Our Lady Immaculate is three fold. First, it is the recognisable building in downtown Guelph, second, its towers that drew me towards the downtown during my stay. And thirdly a small tribute to my Opa who was a Roman Catholic in life, but from a different parish.
Nikon FM - AI-S Nikkor 35mm 1:2.8 - Fomapan 400 @ ASA-200 - Rollei Low Speed (1+4) 10:45 @ 24CWeek 02 - Ghosts - While Streetsville offered up a lot of excellent historical buildings, the Barber House has of all of them the best story. Which is more on the history of the property and the death of Elizabeth Comfort at the hands of Tory Thugs during the 1837 Rebellion and the ghosts that still haunt the site today.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 400 @ ASA-200 - Adox Atomol 49 (Stock) 9:00 @ 20CWeek 03 - Daily Gind - My choice for this image became clear because the idea I had was to convey the loneliness of a campus that should have been bustling with activity for start-of-term.
Nikon FM - AI-S Nikkor 50mm 1:1.4 - Fomapan 400 @ ASA-400 - Acufine (Stock) 6:00 @ 20CWeek 04 - Hometown Blues - Again the choice of the image comes down to story and with Milton, there are a lot of buildings that I have connections with, but the old Court House has the best story as it secured Milton as the seat of Halton and helped catalyse the preservation of other historic buildings in town.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fompan 400 @ ASA-400 - Adox Atomal 49 (Stock) 10:00 @ 20CWeek 05 - The Falls - There's something about a hike in the Winter with snow and trees and your wife to add to the same shot you get while hiking through the woods in the winter.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 400 @ ASA-200 - Kodak D-76 (1+1) 9:00 @ 20CWeek 06 - Erchless - The title of week six ended up being the deciding factor of which image would be chosen. In this case the Erchless manor, showing all three sections of growth between 1835-1858 and remains the ancestral home of the Oakville Chisholms.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 400 @ ASA-200 - FPP D96 (Stock) 7:30 @ 20CWeek 07 - The Neighborhood - Picking an image for week 7 was hard, I'd walked this route many times over the past couple of years. But the pedestrian bridge over the railroad made sense as it closed the loop on the walking route.
Nikon FM - AI-S Nikkor 35mm 1:2.8 - Fomapan 400 @ ASA-320 - Ilford Ilfotec HC (1+63) 12:00 @ 20CWeek 08 - Still As The Grave - Despite being knee-deep in snow, I managed to visit a pair of historic cemeteries. But this photo, while far from perfect stood out, with the bare branches serving as light beams coming from the head of the statue of Jesus.
Nikon FM - Lomography Daguerreotype Achromat 2.9/64mm - Fomapan 400 @ ASA-200 - FA-1027 (1+14) 8:00 @ 20CWeek 09 - By the Bay - Not often do you have a reminder of the original founding of the community, but in Burlington they have that reminder. The Joseph Brant House today is a 1937 replica of the original 18th Century home of noted Mohawk leader, Thayendanegea.
Nikon FM - AI-S Nikkor 50mm 1:1.4 - Fomapan 200 @ ASA-200 - Ilford Perceptol (Stock) 6:00 @ 20CWeek 10 - Sixteen - Knox Sixteen, originally founded in 1844 as a wooden meeting house for Presbyterians in the region, it was clad in brick in 1899 and is the only surviving building from the settlement of Sixteen Hollow and remains an active congregation today.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fompan 200 @ ASA-200 - FA-1027 (1+19) 10:30 @ 20CWeek 11 - Galt - The Russian Gun, captured by the British at Sevastapol in 1855, granted to Galt in 1863. It was fired in May 1866, after three successful rounds, the fourth round went off early killing two and injuring three. It's not safe and deactivated in Queen's Square.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 200 @ ASA-200 - Ilford Ilfotec HC (1+63) 9:00 @ 20CWeek 12 - Distant Voices - Two of the three reconstucted Wendat Longhouses at Crawford Lake, built with the aid of indigenous people to showcase life in the area in the 15th Century.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 200 @ ASA-200 - Kodak D-76 (1+1) 9:00 @ 20CWeek 13 - By George - The Former Barber Mill that operated from 1854-1991 and was the first industrial uses of hydro electricity in 1880.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 200 @ ASA-200 - Adox Atomal 49 (Stock) 10:00 @ 20C

For this 52-Roll project, I decided to play a little bit with the available data that I have access to, thanks to tracking the entire project in an Excel spreadsheet and tailoring the spreadsheet to make it easy to analyse and turn the data into information. Some of my job tasks often involve analysing data for future decision-making, and I think this project might help determine future project targets, locations, and even film development. With everything that took place throughout 2021, I'm not surprised that most of the week's of the projects were located in my hometown of Milton. A total of eleven weeks were spent in Milton, the second-highest location count being Oakville and Toronto, also no surprise at those two numbers. Three weeks were spent in Hamilton, and an additional three weeks were shot at multiple locations. With the remaining places being 1-2 weeks. With an entire range of Nikkor manual focus lenses available, there were two top lenses from the project; at the number one spot with fourteen weeks being used is the Nikkor 35mm f/2.8 and in second place with twelve weeks the Nikkor 28mm f/3.5. This year, I allowed myself to have weeks where I brought multiple lenses; this accounted for ten weeks of the project. I used my Lomography Achromat 64mm f/2.9 lens twice this year. The lenses with the lowest counts were the 50mm f/1.8 and 200mm f/4; no surprise on the 200mm as it came into my kit late in the year and is highly specialised. Some films are easier to nail down a developer than others when it comes to Foma films. Over the year, I used seventeen different developers. The one that I used the most shouldn't come as a surprise, Ilford Ilfotec HC, at a total of eleven times. Tied in second place are Adox Rodinal (a surprise) and Adox Atomal 49, another fantastic developer who did a fine job with Fomapan 400 and Fomapan 200. Then if you break it down by film stock and developer used. The most used Developer with Fomapan 100 was a tie between Ilfotec HC and Adox Rodinal, both at five times each. Fomapan 200, a tough stock to nail down a good developer, was Ilfotec HC four times, followed by Kodak D-23. This older developer is one of the best developers for the stock. Then with Fomapan 400, the number one developer is Adox Atomal 49 at four times, and provided the best results at both the box speed of ASA-400 and at one-stop over (ASA-200) and pulled in development.

Week 14 - Upon Avon - Originally built in 1910 as the Imperial Ratten Co and one of the big five furniture factories in Stratford. Imperial became a major player in modern design through the 1950s. It closed in 2006 as Krug Furniture.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 200 @ ASA-200 - Adox Atomal 49 (Stock) 10:00 @ 20CWeek 15 - In Memorial - It's always fun to explore a new park that you pass every day. But also to find it has a far richer history than you first expected.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 200 @ ASA-160- Adox Rodinal (1+50) 8:00 @ 20CWeek 16 - The Summit - It's never fun to have movements restricted, but it does help to take on a new hiking trail at the Summit entrance for Kelso Conservation Area!
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 200 @ ASA-200 - FPP D96 (Stock) 9:00 @ 20CWeek 17 - Boston - Boston Presbyterian Church is the area's oldest congregation having been founded in 1820.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 200 @ ASA-100 - Adox FX-39 II (1+9) 10:00 @ 20CWeek 18 - End of Line - A rather unassuming house operated as a vaccine farm from 1885-1916.
Nikon FM - AI-S Nikkor 35mm 1:2.8 - Fomapan 100 @ ASA-100 - Rollei Supergrain (1+15) 7:30 @ 20CWeek 20 - Sharpe's Tragedy - A Memorial to Colonel S. Sharpe - committed suicide on 25 May 1918 brought on by Post-Traumatic Stress. Least We Forget.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 100 @ ASA-100 - Adox FX-39 II (1+9) 7:00 @ 20CWeek 21 - Yorklands - The Main Administration building of the former Guelph Reformatory.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 100 @ ASA-100 - FA-1027 (1+14) 9:00 @ 20CWeek 22 - Bought the Farm - The overgrown rear yard for the Historic Cattle barn at Scotsdale Farm, the barn probably dates to the 1870s.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 100 @ ASA-100 - Ilford Ilfotec HC (1+63) 10:00 @ 20CWeek 23 - Parkway - Looking out over Navy Island which was a shipyard, the Republic of Canada, Resort Island, and potential site for the United Nations Headquarters.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 100 @ ASA-100 - Adox Rodinal (1+50) 9:00 @ 20CWeek 24 - Westfield - The 1814 Log Church that once served the Six Nations Reserve.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 100 @ ASA-100 - Rollei Supergrain (1+15) 7:30 @ 20CWeek 25 - Embrace the Grain - Big B is a very special stuffed panda that has helped both Heather and I.
Nikon FM - AI-S Nikkor 50mm 1:1.8 - Fomapan 100 @ ASA-100 - Ilford Ilfotec HC (1+79) 12:00 @ 20CWeek 26 - The Gorge - The Elora Inn & Spa is built from the original 1832 Saw, Grist, and Distillery and Elora's oldest building.
Nikon FM - AI-S Nikkor 50mm 1:1.4 - Fomapan 100 @ ASA-100 - Ilford Ilfotec HC (1+79) 12:00 @ 20CWeek 27 - Steel City Blues - The Lister Block, my personal choice to symbolise the height, the fall, and rebirth of Hamilton's downtown core.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 100 @ ASA-100 - Adox Rodinal (1+50) 60:00 @ 20C

There is a certain joy to completing this project during the ongoing global pandemic. I realised several months in that I could not always rely on the subject matter that drove previous projects. With events being cancelled and travel restricted, not to mention plenty of ongoing changes in public health guidelines, I knew that I would have to get creative in some cases. But that is what these projects are about, being creative. That meant that the entirety of this project got created right here in Ontario. And mostly local also, the furthest spot, being Petrolia, Ontario only two and a half hours away. As for reenactments and photo walks, these were mostly cancelled. And while I didn't get out to any War of 1812 related events, I did experience some World War 1 events thanks to the fine folk in the 11th Swiss Rifles. And both these events expanded my understanding of the conflict, not just in Canada's role but also the role of the Swiss, which is often missed in Canadian history textbooks. Equipment-wise, I suffered no catastrophic failures, sure a couple of glitches, but these were easily fixed at home. I also added two new lenses to my kit, the 24mm f/2.8 and 200mm f/2.8; as for lenses, I did manage to use almost every manual focus Nikon lens in my kit, save for one, the PC Nikkor 35mm f/2.8. I did consider the PC-Nikkor for one of the weeks but decided against it because lugging a tripod does make life harder. For film stocks, I'm happy with my choice of going with the three main Fomapan films and learning a bit more about their nature. The biggest is that Fomapan 400, while it still works best when shot at ASA-200, can be shot at the box speed of ASA-400, providing you develop it in the proper chemistry. I still had a hard time with Fomapan 200 but am a little closer to cracking the code on that stock; it does perform the best in classic developers like Pyro based and D-76/D-23. And, of course, Fomapan 100 remains a solid favourite. And it felt good to revitalise the project idea in my mind and certainly provided plenty of inspiration. I even think that I may return to a sheet based project in a couple of years.

Week 28 - Stone Town - St. Marys 1907 GTR station, today operated by VIA is the third and final train station completed for the town. The first station still stands a kilometer outside the community at St. Marys Junction.
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 100 @ ASA-32 - Ilford Ilfotec HC (1+63) 8:30 @ 20CWeek 29 - Muddy York - The Gooderham Building, an icon of Old Toronto, despite dating to 1892, it has survived against much of the urban renewal of the 1970s.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 100 @ ASA-100 - Adox Rodinal (1+50) 9:00 @ 20CWeek 30 - The Last Bastion - A visit to Lindsay, Ontario and finding the Victoria Park Armoury that looks totally different from all the other armouries from the era across Ontario.
Nikon FM - AI-S Nikkor 35mm 1:2.8 - Fomapan 100 @ ASA-100 - Ilford Microphen (1+1) 9:00 @ 20CWeek 31 - The Swiss Connection - Members of the 11th Swiss Rifles, a Reenactment Unit portraying a Swiss rifle unit during World War 1 and their replica Maschinengewehr Modell 1900.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 100 @ ASA-100 - Ilford Microphen (1+1) 9:00 @ 20CWeek 32 - Syndenham - The Boyhood home of World War 1 Flying Ace Billy Bishop (bet you thought I was going to say Snoopy).
Nikon FM - AI Nikkor 28mm 1:3.5 (Yellow-12) - Fomapan 100 @ ASA-100 - Adox Rodinal (1+50) 9:00 @ 20CWeek 33 - Connect - Saying goodbye to a wonderful social group, group founder Susan taking in a thank you video the participants put together.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 100 @ ASA-100 - Ilford Ilfotec HC (1+63) 10:00 @ 20CWeek 34 - Brant's Ford - A sad memorial to the thousands of children who never left the Residential School Systems on the steps of the oldest such places in Canada.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 100 @ ASA-100 - Adox FX-39 II (1+9) 7:00 @ 20CWeek 35 - Smokey Hollow - The beautiful Grindstone Creek valley while it was not the shot I planned but I'm far more happy with this one.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 100 @ ASA-100 - Adox Rodinal (1+50) 9:00 @ 20CWeek 36 - The Quarry - Getting back to the unstated goal of trying to fit in all the Conservation Halton Parks into the project!
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 200 @ ASA-200 - Adox FX-39 II (1+9) 10:00 @ 20CWeek 37 - Break On Through (To the Other Side) - While a rather commercial looking door for a week about doors, Sunshine Donuts is an amazing local store that delivers amazing treats. It's been a constant for Heather and I through this year and the one before.
Nikon FM - AI-S Nikkor 50mm 1:1.4 - Fomapan 200 @ ASA-200 - Ilford Ilfotec HC (1+63) 9:00 @ 20CWeek 38 - Cobblestones - The Paris Wincy Mills, a former industrial mill from 1889 that survived well into the 20th Century now is a local hub for food and vendors. Also an excellent craft brewery.
Nikon FM - AI Nikkor 24mm 1:2.8 - Fomapan 200 @ ASA-200 - Ilford Ilfotec HC (1+63) 9:00 @ 20CWeek 39 - Entrenched - Lance Corporal Julius is the unit Mascot for the No. 3 Casulty Clearing Station - Canadian Army Medical Corps.
Nikon FM - Lomography Daguerreotype Achromat 1:2.9/64mm - Fomapan 200 @ ASA-50 - Kodak D-23 (Stock) 5:45 @ 20CWeek 40 - Stone City - Shoal Tower, one of four Martello towers that form the defence of Kingston. And one of only a handful of surviving towers in Canada.
Nikon FM - AI-S Nikkor 200mm 1:4 - Fomapan 200 @ ASA-200 - Kodak D-23 (Stock) 7:00 @ 20C

This year has only been the second time I put together a final book on the project. The book wasn't entirely required by my original criteria, but it gives the project that last project. The saying "it's not complete until it's printed", which I don't always agree with, but makes sense in this case. While the blog posts allowed for that 'big-picture' view for each week with either an overarching theme or local history, I rarely translated that directly to the book copy. The book gave me a chance to target a specific image, picking the shot that I liked the most from the week or had an interesting story attached. Some weeks, I had to seriously trim down the entry to fit and still have the text big enough for people to read. I could explore many different parts of history that I enjoy studying, including military, railway, architecture, natural, and local histories. I covered a lot of early colonial history in Ontario and some of the darker aspects of that story. I touched on a lot of World War One history through local men who served and learned a great deal about the Swiss during the Great War. Surprisingly, despite visiting a few locations related to the War of 1812, none of those made it into the book this time around. But the biggest help to get the book moving from the start, allowing things to clip along at a good pace, so I only had a handful of things to take care of to complete the project.

Week 41 - If I Left the Zoo - Tiger Cub Milia is the most recent arrival to the Zoo and the Amur Tiger species.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - Fomapan 200 @ ASA-200 - Ilford Ilfotec HC (1+63) 9:00 @ 20CWeek 42 - All In the Details - The Steeple of Knox Presbyterian Church in Downtown Milton, Ontario. Depsite appearances, it never had bells.
Nikon FM - AI-S Nikkor 200mm 1:4 - Fomapan 200 @ ASA-200 - Kodak D-23 (Stock) 7:00 @ 20CWeek 43 - Black Gold - While a shot of the original oil fields would have been more appropriate, Sunnyside Mansion, built for John Henry Fairbanks, Ontario's biggest oil baron's 1891 Victorian Mansion is a rather creepy but photogenic building in downtown Petrolia, Ontario.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 200 @ ASA-100 - Pyrocat-HD (1+1+100) 7:30 @ 20CWeek 44 - Highlands - The Wellington County Poorhouse, the oldest surviving such structures in Canada used to house men and women poor and destitute to 'fix' their moral failing through hard work. Today it is the local history museum and archives.
Nikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 200 @ ASA-200 - Adox XT-3 (Stock) 6:00 @ 20CWeek 45 - For the Fallen - A beautiful memorial to Lieutenant-Colonel John McCrea, the author of one of Canada's most notable poems of Rememberance "In Flander's Fields" installed near the Guelph Civic Museum.
Nikon FM - AI-S Nikkor 105mm 1:2.5 - New Classics EZ400 @ ASA-250 - Kodak D-23 (Stock) 7:30 @ 20CWeek 49 - Houses of Holy - St. Jude's Anglican church, a congregation that traces itself back to 1839, their current home from 1889 is one of the more difficult churches to photograph especially around the noon hour.
Nikon FM - AI Nikkor 28mm 1:3.5 - New Classic EZ400 @ ASA-400 - Adox Atomal 49 (Stock) 10:00 @ 20CWeek 47 - Worth The Drive - Acton's history has always been tied to the leather industry, and today that is only continued through the Old Hide House.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - New Classic EZ400 @ ASA-200 - Adox Atomal 49 (Stock) 9:00 @ 20CWeek 48 - Danforth to Downtown - A long walk from Greektown to the downtown put me past the site of Toronto's earliest 'lost' buildings, the Simcoe's cottage grandly named "Castle Frank" now only a small historical marker.
Nikon FM - AI Nikkor 24mm 1:2.8 - New Classic EZ400 @ ASA-200 - Pyrocat-HD (1+1+100) 12:30 @ 20CWeek 49 - First Capital - A memorial to the Simcoes, while most memorials feature only John Graves (Upper Canada's first Lieutenant-Governors), this one also features Elizabeth, who's watercolours and diaries are key to our understanding of early life in Upper Canada.
Nikon FM - AI-S Nikkor 35mm 1:2.8 (Yellow-12) - Fomapan 400 @ ASA-400 - Flic Film Black/White & Green (1+49) 13:30 @ 20CWeek 50 - Little Saxony - The stunning Puddicombe House in the New Hamburg Heritage District, originally built 1868 this Italinate Mansion is a boutique hotel, resteraunt, spa and event space since 2006.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20CWeek 51 - Rattler - A beautiful afternoon hike after a snowfall at Rattlesnake Point. And while we didn't make it too far, I'm happy with the results I did get.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 400 @ ASA-200 - Adox Rodinal (1+50) 11:00 @ 20CNikon FM - AI Nikkor 28mm 1:3.5 - Fomapan 400 @ ASA-200 - Flic Film Black/White & Green (1+49) 12:00 @ 20C

And so dear readers, we've reached the end of another project. It was fun to dust off this project form again, and it made me glad I still had the chops to complete the task at hand. And despite everything that happened this year, I still managed to complete the project with no significant failures. If you like what you see and want a copy, you will be able to pick up this project in book form, and all the images featured here on this post are the ones that I chose for the book itself. It will be available at the end of February 2022 through Blurb. Maybe next year, I was revisiting a sheet-based project, but we'll see how the whole parenting thing goes first.

#foma52 #52roll #52rollproject #accufine #adoxatomal49 #adoxfx39ii #adoxrodinal #fomapan100 #fomapan200 #fomapan400 #fppd96 #ilfordilfotechc #ilfordperceptol #kodakd76 #nikkor #nikonfm #rolleirls

Camera Review Blog No. 139 – Canon EF

I admit that I haven't used many of them for Canon cameras because I'm primarily a Nikon shooter. But there's something special about a unique camera within the overall history of a camera manufacturer, and when it comes to Canon, that camera is the EF. Not to be confused because these days, when you match Canon and EF, you're talking about their line of Autofocus lenses for the EOS system in the EF-Mount. But before the name was applied to lenses, it was a model of Canon cameras. Often passed over in general history, the EF is unique for two reasons: it was the first camera to use a vertical-travel metal shutter (the iconic Copal Square). It also offered up some form of electronics and semi-automatic exposure control. Special thanks to Bill Smith for loaning this beauty out for a review!

Camera Specifications
Make: Canon
Model: EF
Type: Single Lens Reflex
Format: 135 (35mm), 36x24mm
Lens: Interchangable, Canon FD-Mount
Shutter: Hybrid Electro-Mechanical Vertical travel metal focal-plane shutter, 1/1,000 - 1/2″ (11-Step, Mechanical), 1″ - 30″ (6-Steps, Electronic).
Meter: Centre Weighted Averaging SPD Photocell, EV -2 ~ EV18 at ASA-100, ASA-12 - ASA-3200
Year of Manufacture: 1973 - 1978

Background
Canon stands as Japan's first producer of a compact 35mm. Founded in 1933, the company had their prototype, the Kwanon. After three years, the first rangefinder, the Hansa Canon, hit the public market. Canon focused solely on camera bodies, while Nikon supplied the lenses at least until 1940. Canon continued its focus on rangefinders in the post-war era, even into the mid-century when more companies were moving to an SLR format. But the march of time would see Canon release their first SLR, the Canonflex, in 1959. The Canonflex used a breech-lock bayonet mount for their interchangeable lenses, known as the R-Mount today. Canon continued production of the R-Mount cameras until 1962 when they updated their mount to the FL-Mount with 1964's FX and FP SLRs. The FL-Mount cameras included the innovative Pellix, which used a semi-transparent mirror. It was the 1971 release of the Canon F-1 that introduced the final iteration of the Canon breech-lock mount, the FD-Mount. But the F-1 remained at its core an all-manual camera and the release of the Konica Auto-Reflex T with shutter-priority semi-automatic metering. Taking the existing F-1 form-factor, Canon fixed the focusing screen and prism forming the body of the EF but instead of using their horizontal cloth shutter, purchased a shutter from a third party. The legendary Copal Square Shutter gives the EF the status of the first Canon SLR with a vertical travel metal shutter. But also a hybrid shutter with the faster speeds being mechanical down to 1/2″ while the 1″ to 30″ speeds being controlled electronically. It also provided the camera with shutter priority semi-automatic exposure metering capacity using a centre-weighted averaging silicon photodiode. While often playing backseat to the more popular F-1, the EF is a proof of concept camera that sold for $460 (USD) (~460$ CAD) when it came out in 1973; that's about USD 2,900 today (~3,500$ CAD). Many Canon cameras came in both Chrome and Black finishes, the EF like the F-1 came in only black, and no special editions or variants were released. Production ceased in 1978; the lessons learned went into creating the Canon A-1 and the next camera with a vertical travel metal shutter, the T50, came out in 1983.

Canon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20C

Impressions
You can see Canon's use of the F-1 as a foundation to the EF at a distance. The camera is designed around an all-metal body and, more importantly, the Copal Square shutter. The body is well laid out and carries many of the typical design elements of cameras of the era with angled off corners allowing it to be easily held in hand comfortably. The design is clean, with all your controls well laid out. My favourite feature is the shutter speed dial, it's mounted around the shutter release, but the front section sits out slightly from the top plate, making it easy to manipulate with your index finger without having to remove your eye from the viewfinder. There's a dedicated on/off switch, with the switch popping the film advance leaver out ala Nikon, but you cannot accidentally pull it out and power on the machine, so it does save the batteries. And speaking of batteries, the camera runs on a pair of mercury cells, with each cell being housed in its holders side-by-side. It's an interesting configuration. The film advance lever moves smoothly, and the shutter sound is delightfully authoritative. The camera asks to be used, and you want to use it as soon as you pick one up.

Canon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Ilford Delta 100 @ ASA-100 - Adox Rodinal (1+50) 14:00 @ 20C

Experiences
Despite primarily shooting Nikon cameras, the EF is a great camera to work with and was easy enough for me to pick up as many of the standard functions and controls are in the same place. It is truly a camera for the photographer. It's well balanced in hand with a good weight, enough to know that the camera is there without being overly burdensome. Despite lacking the Canon Quick Load system, the camera is easy to load and doesn't require much fiddling. The camera features an on/off switch, which when you flip up to the on position will pop the film advance leaver you, then when you switch it off, you need to put that leaver flush to the camera body. One of the best parts of working with the camera is the viewfinder; it's bright, clear, and easy to focus on despite not having a split prism. Although the best part is the amount of information displayed, you have a full range of shutter speeds, including which one is selected along the bottom of the finder. A needle on your right side indicates which aperture the camera has selected when in shutter priority mode or in manual mode, which aperture you need to set the lens to. And that is my one big problem, is that there's no way in the viewfinder to see which aperture you have selected on the lens. While the metered manual is possible, it's the best run in semi-automatic mode. And to set that put the lens' aperture ring to the green A. Probably the best feature is that the shutter speed selector is easily adjusted without needing to remove your eye from the finder. The dial juts out from the camera's body, allowing you to move it with your index finger quickly. The film advance has a decent throw and a quick return. Although I found myself keeping my thumb on the winder and guiding it back, I don't know why I picked that up. Mounting and dismounting the lens can be troublesome if you're not used to the old-style breech-lock with the collar locking device, but you don't have to only go with those lenses. You can use the newer style FD lenses with the button release. Probably what I find the best about the EF, it gets out of the way and lets me enjoy the process of making images with the camera.

Canon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20C

Optics
Optical quality is something you do not have to worry about with any Canon FD lens. These early lenses bore close similarity to the older FL lenses, and you can use these lenses on the EF but with stop-down metering only. Best to stick with actual FD lenses. The lenses feature a locking collar in the form of a silver ring at the back of the lens. The idea was to reduce wear on the lens' delicate parts. And it shows as many original FD lenses are in excellent condition. What makes the FD mount even more impressive than from the start was future proof; you can run these lenses on a fully auto-exposure camera. If you are looking for period-appropriate lenses, the old style with the locking collar is the best match. Canon produced prime lenses from 14mm to 800mm, and a tonne of zoom lenses; probably some of the best choices for a quick and helpful setup include the 24 or 28mm lenses with an f/2.8 aperture, a 50mm f/1.8 S.C. or f/1.4 S.S.C. and for something longer either the 100mm or 135mm lens. If a one-and-done lens is a better option, you have fewer options for fixed aperture zooms; a 35-70mm f/4 is your best option for an excellent all-around 'kit' lens. If you go with the New FD lenses, FD(n), these will lack that S.C. or S.S.C. markings as all the FD(n) lenses have that desirable S.S.C. coating.

Canon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20CCanon EF - Canon Lens FD 50mm 1:1.8 S.C. - Agfa APX 100 @ ASA-100 - Ilford Ilfotec HC (1+31) 7:00 @ 20C

Lowdown
If you're the type of photographer who wants a little bit of automation in their FD kit but doesn't like the idea of a plastic SLR, then the EF is a good camera for you. With all-metal construction, a solid and reliable shutter and shutter-priority metering well, you've described the EF. The Canon EF also is a great overall camera if you want something unique, reliable, and has excellent performance. The camera is surprisingly affordable on the used market if you can find one among the lenses list. The ones that I managed to find run between 80-130$ and often comes with a lens. I can honestly see this camera being a perfect second body paired with a Canon F-1(n) or New F-1, or a great addition to a completist's collection of Canon FD mount cameras. I know that if my camera kit had a more Canon foundation, the EF would undoubtedly be one to add.

Video Review - Release in late January.

Further Reading
Don't just take my word on the Canon EF, you can check out the reviews by other awesome camera reviewers!
Mike Eckman - Canon EF Review
Imaging Pixel - Canon EF Review
Medium - Film Camera Review: Canon EF
Canon Classics - Canon EF Review

#camerareviewblogs #adoxrodinal #agfaapx100 #camera #camerareview #canada #canon #canonef #ef #gear #ilforddelta100 #ilfordilfotechc #milton #oakville #ontario #review

Foma:52 – Week 50 – Little Saxony

There's a good chance that if I'm heading along Highway 7/8, a sign for New Hamburg is something that I will generally ignore. If I'm in that part of Ontario, I'm on my way to points further west, good chance, Stratford. But I'm also a sucker for a new town, so I made the point to head into New Hamburg during a day out shooting for reviews last year. Like other communities in Southern Ontario, the town has been expanded outwards in urban sprawl with several new subdivisions. Still, it has also maintained a cosy historic downtown, which is where we're exploring today.

Built in 1990, this 65 foot water wheel commemorates the early waterpowered industry that formed the core of New Hamburg's foundations.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20C

There is fertile soil and running water you will find a human settlement. While the original name for the land and the river remains lost in time. The area where New Hamburg stands today has passed through several different hands; the first was the Neutrals, the Attiwonderonk. They were pushed out and destroyed by the Haudenosaunee, and over time, they were pushed out by the Anishinabewaki or Mississaugas. After the formation of Upper Canada, British Colonial Authorities secured title to the land under Treaty 3 of 1792, designating the rich area as Crown Reserve. Essentially land in the ownership of the Monarchy is to be given as a reward for services rendered. Although some former slaves escaped and settled here, it remained uninhabited primarily and unsettled, carving a life out of the dense bush. The Post-War period brought a great deal of colonial expansion, including the sale of Crown Land to development companies, the largest being the Canada Company. Surveys in 1824 divided the land into townships, with Wilmot being accessed through the newly created Huron Road in 1828. The area's rich soil and agriculture attracted many German immigrants, primarily those who followed the Amish and Mennonite beliefs. The first signs of a town came in 1832 when Josiah Cushman established a sawmill on Smith Creek, soon others joined, and additional mills took advantage of the water power afforded by the creek, the name Cassel became attached to the settlement and then Hamburg. The small settlement nearly vanished after a Cholera epidemic ripped through the area in 1834; despite everything, the colony survived. Although among the dead was Cushman, in 1838, the Cushman interests were purchased by a Scottish Lord, William Scott or Lord Campfield, who continued to expand the small community. Scott immediately put his mark, renaming Scott Creek the Nith River, building a new dam and establishing several new mills. The name of New Hamburg came in 1840 with the opening of the first post office; soon, more businesses arrived in the growing settlement. Although it was the arrival of the Grand Trunk Railway in 1856, things started to expand, and incorporation as a village came a year later. The industrial base only increased through the 1860s. More mills and factories opened along the Nith River, supported by other hotels, foundries, carriage works, taverns, three churches, and even a school. Agriculture remained the primary industry outside of New Hamburg, and the village continued to support that base in the rural sections. Scott's sawmill continued to operate until 1902 when a fire destroyed the original structure, and it was replaced by flour and later feed mill in 1905 and still stands today. The New Hamburg Felt Boot Co also dates to 1898 and still operates, although the building is far older. While the village thrived through the early 20th century and even achieved incorporation as a town in 1966. The boom would not last long; de-industrialisation and the closure of many family farms proved too much. In changes, government structure resulted in dis-incorporation in 1973 and absorbed into Wilmot Township with several other rural villages. Thankfully the strong heritage movement in the community resulted in the designation of the central core as a Heritage District in 1992. Today New Hamburg is a small sleepy rural community with the historic centre maintained with an increasing urban sprawl on the periphery.

Built in 1905 to replace Scott's lumber mill, the Stuart Flour Mill a brick Ontario Vernacular building today serves as a B-W Feed Store.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20CThe Hartman Bridge, a steel Pratt Truss bridge completed in 1936, this is the fourth bridge to cross the river, the first being built 1845.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20C

This week proved challenging to choose which images to include in the post as there are so many buildings in New Hamburg with excellent stories attached to them. So I went with a bit of help and found an only walking tour of the New Hamburg Heritage district and began to look at items that followed my own written history of the community and then found matching photos. The William Scott House and Puddicombe house. Some of the more interesting buildings, like the Standard Reliance & Mortgage Co building, are easy to miss because it's tiny yet has a grand architecture usually reserved for large installations. The Imperial Hotel, while not the most imposing commercial block is where I got lunch the day I was visiting New Hamburg; they do an excellent Mac & Cheese. And while I would have liked to include more, the town's short history meant that adding in a couple of bonus images may have thrown off the flow of the text block.

The Puddicombe House, originally completed in 1868 by Samuel Merner, but sold to the Puddicombe family in 1888 and stayed in that family until 1969. It's been a boutique hotel, spa, and event space since 2006.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20CThe 1846 William Scott House, it has also been the home of Samuel Merner when he was appointed a Senator and today is the Waterlot Restaurant.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20C

Through this project, I have learned that knowledge of a place is key to selecting the kit for photographing the location. In this case, knowing that the downtown is compact and has narrow streets, I went with the Nikkor 24mm f/2.8 and added a pale yellow filter to the lens. I could have gotten away with the 28mm lens, but the 24mm suited the space better. The addition of the 105mm probably wouldn't have gone amiss, but I was also working with limited bag space on the trip. And working with bright light, I went with a one-stop over-exposure, shooting the film at ASA-200 and then pulling in development. For development, I went back to an old favourite, Ilford Ilfotec HC, running with a 1+63 dilution to help with compensating the over-exposure.

Originally opening as the Domnion Hotel in 1872, it is better known as the Imperial Hotel. It also served as the first Library (Mechanic's Institute 1881) and a third storey added in 1902.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20CThe 1914 Standard Reliance & Mortgage Co is a tiny Beaux Arts/Classical Revival that if you blink you will miss it, it also was a jewellery business in 1919, today it's a small pizza place.
Nikon FM - AI Nikkor 24mm 1:2.8 (Yellow-12) - Fomapan 40 @ ASA-200 - Ilford Ilfotec HC (1+63) 11:45 @ 20C

Next week I'm finally going to visit all the major parks under Conservation Halton with a visit to Rattlesnake Point!

#foma52 #52roll #52rollproject #architecture #canada #canadianhistory #downtown #fomapan400 #heritagedistrict #ilfordilfotechc #newhamburg #nikonfm #ontario #town #urban #wilmottownship