1989. A pocket PC before pocket PCs were cool. 💼💾

Atari Portfolio. Intel 80C88 CPU. 128KB RAM. Monochrome LCD (no backlight). Full QWERTY keyboard. 3 AA batteries.

It was tiny. It was slow. It was IBM-compatible.

And in Terminator 2, John Connor used one to hack an ATM.

The original palmtop. Decades ahead of its time.

#AtariPortfolio #PalmtopPC #1989Tech #Terminator2 #HandheldComputer #RetroComputing #MobileHistory

Mecha Comet modular Linux handheld hits Kickstarter for $189 and up

The Mecha Comet is a modular handheld Linux computer featuring a modular input section below a 3.92 inch AMOLED display, allowing you to swap out a QWERTY keyboard for a gamepad, I/O board, or other modules.

After first introducing the device a year ago, the makers of the Mecha Comet have now launched a Kickstarter crowdfunding campaign with Early Bird reward levels starting at $189 for an […]

#crowdfunding #handheldComputer #mechaComet #modular Read more: https://liliputing.com/mecha-comet-modular-linux-handheld-hits-kickstarter-for-189-and-up/
This DIY Windows 98 "handheld" stuffs the guts of a 90s desktop PC into a compact body, complete with a small PCB, Pentium MMX CPU, mini hard drive, floppy disk drive, QWERTY keyboard, and trackball. https://www.youtube.com/watch?v=G7RhMOKQaTs #RetroComputing #HandheldComputer
Make a Pentium mmx cpu handheld computer

YouTube

GPD MicroPC 2 hits Indiegogo for $495: Handheld computer with Intel N250 processor and a QWERTY keyboard

The GPD MicroPC 2 is a little computer that looks a lot like a laptop, but it’s designed to be used more like a palmtop. Hold it in  two hands and you can reach your thumbs across the QWERTY keyboard for 2-finger typing. But you can also twist the 7 inch FHD touchscreen display and fold it down over the keyboard for use in tablet mode.

First unveiled earlier this month, the little computer […]

#crowdfunding #gpd #gpdMicropc #gpdMicropc2 #handheldComputer #micropc #micropc2

Read more: https://liliputing.com/gpd-micropc-2-hits-indiegogo-for-495-handheld-computer-with-intel-n250-processor-and-a-qwerty-keyboard/

The ClockworkPi uConsole is a handheld computer powered by a compute module. While only a handful of modules are officially supported, a community of Radxa CM5 users have been working on software to support this higher-performance module. https://linuxgizmos.com/radxa-cm5-gets-adapted-for-use-with-uconsole-pocket-terminal/ #uConsole #RadxaCM5 #HandheldComputer #Modular #ClockworkPiUConsole
Update: The GPD MicroPC 2 hits crowdfunding soon for $495 and up. The handheld PC has a 7 inch display, an Intel N250 Alder Lake-N processor, a keyboard and touchpad for thumb typing, and plenty of ports. https://liliputing.com/gpd-micropc-2-is-portable-computer-with-a-7-inch-display-intel-n250-processor-and-a-thumb-keyboard/ #GPDMicroPC2 #GPD #MicroPC #HandheldComputer
GPD MicroPC 2 is portable computer with a 7 inch display, Intel N250 processor and a thumb keyboard - Liliputing

GPD MicroPC 2 is portable computer with a 7 inch display, Intel N250 processor and a thumb keyboard

Liliputing

HackberryPi CM5 is an open source, Raspberry Pi-powered handheld PC with a BlackBerry keyboard

The HackberryPiCM5 is a handheld computer with a 4 inch, 720 x 720 pixel touchscreen display, a repurposed BlackBerry keyboard, and and a Raspberry Pi Compute Module 5 inside, allowing you to use the device as a portable Linux computer.

It’s the latest line of open source, Raspberry Pi + BlackBerry handhelds from ZitaoTech. While this model is not yet available for purchase from Elecrow or […]

#hackberryPiCm5 #hackberrypi #hackberrypicm5 #handheldComputer #raspberryPi

Read more: https://liliputing.com/hackberrypi-cm5-is-an-open-source-raspberry-pi-powered-handheld-pc-with-a-blackberry-keyboard/

This handheld Linux PC is made for wireless hacking (Crowdfunding a Raspberry Pi-powered Flipper Zero alternative with a QWERTY keyboard)

The Interrupt is a handheld computer with a QWERTY keyboard for thumb typing, a 3.5 inch IPS LCD color display, and a Kali Linux-based operating system. But while you can use it as a general purpose device, it’s really designed as a sort of Flipper Zero-like system for tinkering with nearby wireless devices.

In addition to WiFi 5 and Bluetooth, the handheld has a CG1101 sub 1 GHz radio, […]

#crowdfunding #handheld #handheldComputer #interrupt #interruptTech #pentesting #raspberryPi #raspberryPiZero2W

Read more: https://liliputing.com/interrupt-is-a-handheld-linux-pc-and-wireless-hacking-tool-crowdfunding-a-raspberry-pi-powered-flipper-zero-alternative-with-a-qwerty-keyboard/

Interrupt is a handheld Linux PC and wireless hacking tool (Crowdfunding a Raspberry Pi-powered Flipper Zero alternative with a QWERTY keyboard) - Liliputing

Interrupt is a handheld Linux PC and wireless hacking tool (Crowdfunding a Raspberry Pi-powered Flipper Zero alternative with a QWERTY keyboard)

Liliputing

Pilet hits Kickstarter for $200 and up: Portable modular computer powered by a Raspberry Pi 5

The Pilet 5 is a Raspberry Pi 5-powered handheld computer with a 5 inch display, a built-in keyboard, and a set of buttons, joysticks, and scroll wheels for navigation and gaming. And the Pilet 7 is a portable computer with a larger display and a modular design: you can attach a keyboard, gamepad, or other accessories to the bottom.

Both are open source hardware projects that have been under […]

#crowdfunding #handheldComputer #module #openHardware #Pilet #pilet5 #pilet7 #raspberryPi #raspberryPi5

Read more: https://liliputing.com/pilet-hits-kickstarter-for-200-and-up-portable-modular-computer-powered-by-a-raspberry-pi-5/

Pilet hits Kickstarter for $200 and up: Portable modular computer powered by a Raspberry Pi 5 - Liliputing

Pilet hits Kickstarter for $200 and up: Portable modular computer powered by a Raspberry Pi 5

Liliputing