made this thing go, with #ESPHome and #HomeAssistant. that is, a LED panel from a trolley bus with an #esp8266 driver, at #base48 hackerspace

feels odd to actually complete a project

https://wiki.base48.cz/wiki/Buse_RGB_LED_Panel

out of all nonprofits, ours is the nonprofitest
#base48

Díky @okias a @openalt jsem dnes objevil zajímavé místo #base48 - komunitně provozovaný fyzický prostor, hackerspace
https://base48.cz/

Tam jsem odnesl své starší 2 android telefony, a jsem zvědav, jestli se povede zázrak a #kreyren je promění ve funkční linuxovky 🙂

Mimochodem, dnes večer tam měli grilovačku, a jak jsem tak poslouchal #lomien mluvit o nachystané masu, tak doufám, že se to místo přes noc nepos.re 🤞💩

Base48 - Brněnský hackerspace

Base48 je brněnský hackerspace a komunitní dílna. Nabízíme prostor, vybavení a komunitu pro tvoje elektro, 3D tisk, DIY a další projekty.

#base48 folks, can I print a couple of TPU bits for my drones 👉👈

I'll bring my own filament!

@RueNahcMohr When I've got idea to make some more usable connection of scope to a breadboard, I've originally wanted to buy a thin BNC cable and split it. But I failed to find any thin enough.

So I then found BNC to RCA adaptors in a “computer cable shop” 😝 (www.krup.cz) ~50 m from the #base48 hackerspace. So I made ~70cm RCA to DuPont cable and bought the adaptor. It worked very well.

They sell this adaptor with gender of both sides swapped and even BNC to F-connector.

#electronics

I didn't know you can print a phone on PRUSA printers.

#3dprint #prusa #joke #base48

enjoying an IPA at #base48
"utop to v ty kalafune" #base48

today i'm doing a workshop!

if you'd like to learn to solder and put together a kit, go to some crypto bro's back yard in an obscure village in czech countryside, have a bong hit, and solder on #ctjb #base48

@tommi @rahak_net @fsfe if you ever happen to visit #brno, you're welcome to pop in our #hackerspace #base48 too!