🧵 … last round in the #microphone circus.

Testing the #dynamicMic|s #Beyerdynamic #M201 vs. #DieterSchoepfAudioservice #Addy2 on piano. There's also a #Shure #KSM141 involved, which permanently inhabits my piano together with it's twin, both in their omni setting.

The differences are not in quality, rather in style. The M201 sounds too fresh here, it exaggerates the mid highs. The KSM141 sounds the most honest, most like the piano unplugged. Yet, it is also a little boring. The Addy2 sits in the middle, with some presence being highlighted.

The dynamic mics M201 and Addy2 need gain settings close „to eleven“ on my #RME #OctaMic2 #preamp to work properly here. The #KlarkTeknik #CM1 cheap #CloudLifter clone lifts the M201 up to the moderate gain setting of the KSM141 condenser.

For a foreground pop piano solo, I'd probably use the M201 or Addy2, for background piano or pure piano I'd use the KSM141s, which I did here: https://nielsonaut.bandcamp.com/

#recording #eventTech #Veranstaltungstechnik

🧵 … still on the trip to #DynamicMic (for instruments, mostly)… #Beyerdynamic #M201 vs. #DieterSchoepfAudioservice #Addy2 on plucked string instruments. (I only have two of these myself, and I can play only one of them in a decent manner.)

There is no recommendation to be given here. Both mics are excellent. They sound a little different on instruments, with the M201 having lower output but it bit more high end. The Addy2 is actually more honest, not emphasizing high end so much. It is a matter of taste.

The M201 seems to work well with the #KlarkTeknik Mic Booster #CM1 (a cheap #CloudLifter copy / inline mic #preamp), while the Addy2 doesn't like it.

The Addy2 on the other hand is very good mic for vocals / speech, too, while the M201 doesn't even have a pop killer foam delivered with it.

#Recording #EventTech #Veranstaltungsrechnik

🧵 Continuing my quest to a good #DynamicMic for instruments (mainly), I am having a little detour to inline #microphone #preamp|s. Most people know the #CloudLifter, this little thingie that uses 48V phantom power to make a quiet signal louder without introducing too much noise. But will it alter your sound?

Now #Behringer, in disguise as #KlarkTeknik here, offer something like this for below 30€, while all the competitors go nuts with their prices, the #TritonAudio #Fethead is one of the less expensive ones. If you ask the web for a #diy Fethead, you'll find a couply of simple circuits with less than 10 components…

After some testing, there's only one truth for me & myself: It depends on the mic-preamp combination!

The impedances of preamp and mic might be more relevant than the product. So the KlarkTeknik CM-1 works for the #Beyerdynamic #M201, the FetHead makes it sound worse, but the CM-1 doesn't work so well for the #DieterSchoepfAudioservice #Addy2.

#Recording #EventTech #Veranstaltungstechnik

Warm Audio Reamper ist ein analoger Amping-Hub für Gitarren und Synthesizer, der diskrete Signalwege fürs Pre- und Re-Amping bietet.

Der US-amerikanische Hersteller Warm Audio präsentiert mit Reamper ein kompaktes analoges Gerät, das gleichermaßen als Re-Amp und Pre-Amp für Gitarren und Synthesizer genutzt werden kann. Dafür ist Reamper mit zwei diskreten Signalwegen ausgestattet, die Röhrensättigung hinzufügen und die Pegel der Eingangssignale für die weitere Bearbeitung mit Pedalen, Hardware-Prozessoren oder DAWs vorbereiten.

[…]

https://soundchills.de/warm-audio-reamper/

I got all of the XLR grounds wired to the chassis ground. I'm really close to being done. Most of the stuff I can't finish now is because I need the panel to do so.

#PMillettBuild #TubePreBuild #Audio #DIY #Preamp #Recording

MESA/Boogie launches Subway+ Bass DI‑Preamp II https://rekkerd.org/mesa-boogie-launches-subway-bass-di-preamp-ii/

#Hardware #MESA/Boogie #preamp

I can't decide is on v2 of my Millett tube preamp I should use ON and OFF at the power switch or 1 and 0.

#Audio #Preamp #VacuumTubes #Valves #On #Off #1 #0