Screen printing with powdered glass (frit) works as the same principle as ink on fabric. Create a design and apply to a fine mesh screen. Brush frit over the design and onto the glass underneath.

Pictured here are two somewhat detailed and intricate designs, full fused, roughly 4" x 4" drink coasters. The raven was created with black frit, and the labyrinth is aventurine blue.

#ScreenPrintingWithGlass #FusedGlass #Frit #PowderedGlass #GlassArt #GayArtist

3D Print Glass With a Laser Cutter

We're all familiar with FDM 3D printing, and some of the more well-heeled or adventurous among us may even have taken a faltering step into the world of SLA printers. But for most of us there's a step further in 3D printing that remains beyond our reach. SLS, or Selective Laser Sintering, creates prints from powder by melting it layer by layer using a laser, and has the advantage of opening up more useful materials than the polymer stock of the other methods. It's not entirely unreachable though, as [Kenneth Hawthorn] shows us by using a laser cutter to produce SLS prints from powdered glass.

He evolved the technique of repeated fast passes with the laser to gradually melt more glass together as opposed to slower passes. He achieved a resolution as low as 0.1 mm, though he found a better glass color when the laser was less tightly focused. It raises the concern that glass powder is abrasive and thus a threat to any mechanism, thus he's being extremely careful with the fan settings.

This may not be quite in the league of an SLS printer costing thousands of dollars, but it's a technique that bears more investigation and could no doubt be refined for more custom fused glass creations. He tells us he was inspired by a previous Hackaday post about sintering sand, and of course we'd like to remind readers of a 3D printer that did the same job with the power of the sun.

#3dprinterhacks #lasercutter #powderedglass #sintering #sls