Il Fatto Quotidiano: Ciclista trovato morto in un fossato: è Marco Conte, ex giocatore di hockey. Il corpo

È dell’ex giocatore di hockey su pista Marco Conte, protagonista del primo scudetto del Bassano, il corpo ritrovato questa mattina in fossato nella frazione di Mirabella a Breganze (Vicenza). Il cadavere è stato trovato da un addetto alla raccolta dei rifiuti, con la vittima che – stando alle prime ricostruzioni – sarebbe morta per annegamento nelle prime ore del mattino. Non è ancora chiaro se la vittima sia stata colpita da un malore, per poi cadere nella roggia, o sia stata urtata da un veicolo lungo la piccola e stretta strada di campagna.
Il cinquantenne era molto conosciuto per la sua carriera sportiva e lascia la moglie e tre figli. Il vicentino era in sella alla sua bicicletta elettrica quando per causa ancora da capire è finito all’interno di una roggia e qui sarebbe deceduto per annegamento. A scoprire il corpo un addetto alla raccolta dei rifiuti che ha fatto scattare l’allarme. Su quanto accaduto indagano i carabinieri.
L'articolo Ciclista trovato morto in un fossato: è Marco Conte, ex giocatore di hockey. Il corpo proviene da Il Fatto Quotidiano.

Cyclist found dead in a ditch: it’s Marco Conte, former hockey player. The body

The body of former ice hockey player Marco Conte, a key figure in Bassano’s first championship win, was found this morning in a ditch in the Mirabella a Breganze (Vicenza) hamlet. The deceased was found by a waste collection worker, with initial reconstructions suggesting he died by drowning in the early hours of the morning. It is not yet clear whether he suffered a sudden illness before falling into the ditch, or was struck by a vehicle along the narrow country road.

The 50-year-old was widely known for his sporting career and leaves behind his wife and three children. The Vicenza resident was riding his electric bicycle when, for reasons yet to be understood, he fell into a ditch and subsequently died by drowning. A waste collection worker discovered the body, triggering the alarm. Theabinieri are investigating the incident.

The article “Cyclist Found Dead in a Ditch: It’s Marco Conte, Former Hockey Player” comes from Il Fatto Quotidiano.

#MarcoConte #Bassano #first #Mirabella #Breganze #Vicenza #Theabinieri #CyclistFoundDeadin #IlFattoQuotidiano

https://www.ilfattoquotidiano.it/2026/04/10/marco-conte-ciclista-morto-breganze-news/8351902/

#ricerca #mirabella Emanuele Francesco Mirabella è stato nominato nuovo Coordinatore Nazionale del Consiglio Nazionale delle Ricerche (CNR) per la Federazione UGL Università e Ricerca.

https://www.quellochenoncidicono.site/articles/2025/10/27/emanuele-francesco-mirabella-e-stato-nominato-nuovo-coordinatore-nazionale-del-consiglio-naziona.html

A bit more than a year ago, I finally fell onto the Smart Home and automation bandwagon. I wanted to monitor temperature and humidity in a few spots of the house. I ended up using Aqara Temperature & Humidity Zigbee sensors. I set up Home Assistant to keep everything local, and used a Nortek HUSBZB-1 Zigbee/Z-Wave adapter (affiliate link).

It didn’t take long until I frantically was adding more stuff: Mirabella Genio and Kogan Smart Bulb light globes, a Genio Power Plug with 2 USB ports and a Davis AirLink air quality sensor.

The rest of this post reviews all those products, with pros and cons. All in all, they are generally positive.

For context, I care deeply about being able to control and monitor my home automation locally, without support from the cloud. I don’t want my house to become useless because of a incident in a data centre halfway across the wordl. I also don’t want to put devices on Wi-Fi if they don’t need to (and most don’t). I have a segregated VLANs for IoT devices, and block them from reaching the Internet if possible. Sometimes, Wi-Fi is just not the right technology, no matter how segregated. This is reflected in some of the Pros/Cons below.

Aqara Temperature & Humidity sensor

That is what I wanted initially. Based on the picture (and my inexperience), I expected something the size of a smoke alarm. Those are only about the size of an Australian 50¢ coin. Get it on Amazon (affiliate link).

Pros

• Measurements: Temperature, Humidity, Air pressure
• Size: Tiny
• Connectivity: Zigbee

Cons

• Battery doesn’t last as long as advertised: 2/3 months even on brand batteries
• Sometimes randomly disconnect, which requires pressing the button and fiddling with parameters to reconnect.

Nortek HUSBZB-1 Zigbee/Z-Wave adapter

I only needed Zigbee connectivity for the Aqara sensors, but I figured I might as well pay a bit more to get Z-Wave connectivity, too, but haven’t used it as of yet. Get it on Amazon (affiliate link).

Pros

• Connectivity: Zigbee and Z-Wave
• Home Assistant: supported by default.

Cons

• None

Smart Globes (Mirabella Genio / Kogan)

Mirabella Genio Wi-Fi Dimmable 9W LED GLS Bulb

A number of devices seems to be repackaging Tuya‘s design. This is the case of the Mirabella Genio (above, or on Amazon [affiliate link]), as well as the Kogan Smart Globes. A tell-tale indication that it’s the case is the mention of the Tuya Smart application. I got two on a whim when I found them reduced at Woolies, and then some more when I found more lamps that needed automation. Nonetheless, for more serious integrations, I don’t think I’d continue using Tuya Wi-Fi devices.

While cheap, those unfortunately need Wi-Fi, and the cloud to be setup. Earlier versions (up to ca. mid-2021) could be flashed with the Tasmota firmware. Those I got my hands on are newer versions which don’t support this option. Fortunately, it is still possible to use them locally in Home Assistant with the localtuya integration.

Pros

• Price
• Home Assistant: localtuya

Cons

• Connectivity: Wi-Fi
  • Disconnects randomly
  • Stupidly unsafe way to connect to the network
• Cloud: required to setup; risk of zombie mode when not fully disconnected
• Reset too easily with a few on/off flicks

Genio Power Plug with 2 USB ports

Mirabella Genio Wi-Fi Power Plug with Two USB ports

I needed this to finally control a few fancy lights automatically. I otherwise never turn them on. This is another repackaged Tuya device, which works with localtuya.

Pros

• Ports: two USB ports
• Home Assistant: localtuya

Cons

• Connectivity: Wi-Fi
• Cloud: required to setup
• Measurements: no power consumption sensor

Davis AirLink air quality sensor

I got the Davis AirLink air quality meter to replace the Netatmo Smart Home Weather Station, which doesn’t actually measure outside air quality. It is a dedicated air quality sensor, which packs in temperature and humidity for free. It is relatively small, but unfortunately doesn’t have an IP rating, so extra undocumented steps are necessary to install it outside.

While the device uses Wi-Fi connectivity, it leverages it by enhancing the local measurements with extra information via the WeatherLink app, so it’s tolerable. It is also not mandatory to use the cloud services, and the device can be queried locally.

You could get it on Amazon (affiliate link), but it wasn’t available at the time I looked. I got mine from Instrument Choice instead. They seem dedicated to provide quality measurement equipment and excellent customer service.

Pros

• Size: Small
• Measurements: PM 1.0, PM 2.5, PM 10, Temperature, Humidity
• Cloud: available, but not necessary; can be setup locally via app
• Home Assistant: hass-weatherlink
• Accessories: wall mount, fixings, rigid cover

Cons

• IP rating: none; needs to be “protected”
• Price: a bit pricey
• Power: USB power adapter not really suitable for outside installation

Related posts:

https://consumeristadventures.info/2022/11/12/product-reviews-smart-home/

#Aqara #DavisInstruments #HomeAssistant #InstrumentChoice #Kogan #Mirabella #MirabellaGenio #Nortek #Tuya