Finally got around to making the output register for the WCPU-1. So much easier to read this than a bunch of LEDs!

#electronics #homebrewcomputer #wcpu1

I may have succumbed to a little bit of scope creep before calling the architecture “done”. Bonus points if you can figure out what I’m adding haha

#electronics #homebrewcomputer #wcpu1

My CPU build post made the front page of HN! Life goal achieved! https://news.ycombinator.com/item?id=47389696

#electronics #homebrewcomputer #wcpu1

Write up of my homebrew CPU build | Hacker News

The third installment in the thrilling saga of “can Will make a CPU” just dropped and it’s a good one! https://willwarren.com/2026/03/12/building-my-own-cpu-part-3-from-simulation-to-hardware/

#electronics #homebrewcomputer #wcpu1

Building My Own CPU - Part 3: Just Like the Simulations (It Was Not Just Like The Simulations)

The blog of an engineer from Canada

Will Warren
Vintage Canadian Video Hardware Becomes Homebrew Computer

Are you in the mood for a retrocomputing deep dive into the Scriptovision Super Micro Script? It was a Canadian-made vintage video titler from the 80s, and [Cameron Kaiser] has written up a journey…

Hackaday

This is all it took to get subtraction working (lol). Can you tell I ran out of wires and resorted to some truly cursed creations? Also yes that is the Flags register just sort of hanging there resting on the wire nest.

#electronics #homebrewcomputer #wcpu1

I have birthed AGI, a superintelligence capable of …. counting veeeeery slowly to 255. It will run a lot faster once I get some more parts in the mail I swear. Then it’s only a matter of time until the singularity.

#electronics #homebrewcomputer #wcpu1

Have you taken your daily recommended intake of blinkenlights today? If not, try these

#electronics #homebrewcomputer #wcpu1

M8SBC-486 (Homebrew 486 computer) - maniek86.xyz

M8SBC-486 (Homebrew 486 computer) [Back to the homebrew computers page] The M8SBC-486 is a 486 homebrew computer motherboard made from scratch. From the schematic and PCB to the chipset! It is not based on existing designs, but rather on my experience with my previous experimental 486 homebrew (page about it coming soon!). I started working on it back in August…