After reading the review of the Onyx BOOX Poke3 by @KelsonV I had a look at the BOOX range and ordered the BOOX Page. Here it is, on the right, next to my Kobo Clara HD.
So far, it has been good. I've installed the Android versions of Libby, Pocket and, yes, Firefox and they work fine. I've adjusted the E Ink refresh rates and button settings for the apps to work correctly.
Now on to more reading. ๐
It took over 2 years, but I finally finished my partially 3D Printable E-Reader Case
Pictured is my #Kobo #Clara2e with a laser cut leather cover hand stitched to the 3D Printed Parts and replaceable arms. So far I have the Kobo #Clara 2e, Kobo #Nia and the Kobo #ClaraHD designed. I've also made the parts available on
#Thingiverse: https://www.thingiverse.com/thing:6340022
#Printables: https://www.printables.com/model/662929
and the #FreeCAD design files are on #GitHub: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA%20E-Reader%20Cases/6%20inch
Want to make your own Kobo Clara 2e E-Reader case, or need replacement parts for your existing GLoA E-Reader Case. These are meant to be replacement parts for the GLoA E-Reader cases we are selling on 16 Bit Store. If you'd like to buy a pre-made case we are selling them at https://16bitstore.com If you wish to make your own case, you'll need to design your own cover, however here are the parts you'll need to complete the shell. 8 - IUTA or IUTB threaded inserts. I got mine from Mouser, Both the M2 and the #2-56 insert workshttps://www.mouser.ca/ProductDetail/SI/IUTA-M2?qs=7MVldsJ5Uaw%252Bi7Fy%252BHDedA%3D%3Dhttps://www.mouser.ca/ProductDetail/SI/IUTA-256?qs=7MVldsJ5UawQuw0J58lUSg%3D%3D 8 - 4mm M2 or 3/16" #2-56 Flathead Machine Screws. We designed it for 3/16" of clearance and the arms are 1mm thick so long as the screw is between 1.5mm and 3/16" it'll work 1 - 1/4" ร 1/10" Rare Earth Magnet, though you can probably modify the design to fit wider 10mmx2mm magnets instead. If you want ideas on how we made the cover, we have a playlist on YouTube showing how we stitched one together here: https://www.youtube.com/watch?v=Pb47bBkrjXM&list=PL93zS7e4rwWeBs0Tv40fZr3MvBiOiqcG3 If you want to modify the case the FreeCAD models are avaliable on github here: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA%20E-Reader%20Cases/6%20inch
Soh Kam Yung
16 Bit Virtual Studios