AI6YR BenApr 5
New project acquired. My in-laws wheelbarrow. My son wanted to toss it, his grandmother wanted it tossed, but his grandfather pointed out they had the wheelbarrow since they first got married sometime in the 60's. Already ordered replacement handles and wedge pieces, now deciding how far I go with the metal restoration. On the plus side, all the undoubtedly leaded 1960's paint long gone, lol. Now, to decide on removing the rust or just covering it up after some metal brushing.... #ReduceRepairReuseRecycle #repair
Show threadAI6YR BenApr 5
First step, a little PB Blaster and some work with two garage sale adjustable wrenches. Pb Blaster really reeks. Ends up a lot of the bolts are rust with no threads. #ReduceRepairReuseRecycle #repair
Show threadAI6YR BenApr 5
Pile of metal, tire, old wood (rotted!!!). Had to pull out a hacksaw, many of the bolts were more rust than metal, and you can't remove a bolt where there is no thread. #ReduceRepairReuseRecycle #repair
Show threadAI6YR BenApr 5
Current status: these wheelbarrows have carriage bolts, but when they are very rusty, they spun. An angle grinder would be the best option here, but I have no angle grinder. So, manual hacksaw through the bolt (which works, but is a lot of work. But, great arm workout!) #ReduceRepairReuseRecycle #repair #wheelbarrow
Show threadAI6YR BenApr 5
Sears wheelbarrow. Probably 1960's or early 1970's. Purchased in Ventura or Oxnard, I understand. #ReduceRepairReuseRecycle #repair
Show threadAI6YR BenApr 5
I wonder if someone has the appropriate catalog for this one online anywhere. #Sears
Show threadAI6YR BenApr 5
Going with rust covering paint on this. Did a quick once over with a metal brush while wet to knock off loose rust, and I see the undercoat is most certainly that vintage leaded paint white (it has a certain sheen). So, better covered and encapsulated than removed. Washed with a degreaser. There are bits of ancient cement I can't remove... they will have to remain there I suppose. #ReduceRepairReuseRecycle #wheelbarrow #repair
Show threadAI6YR Ben2d ago
Wheelbarrow parts repainted. New wheel acquired. Waiting on handles. (Will still be cheaper than a brand new wheelbarrow, but not as cheap as snagging a free one off the curb). Restoring it for family sentimental reasons more than anything, lol. #wheelbarrow #ReduceRepairReuseRecycle #repair
Show threadNazo2d ago

@ai6yr

Not for highway use.

Are a lot of people riding wheelbarrows on highways these days?

Show threadJohn Burns2d ago

@nazokiyoubinbou @ai6yr

If there is a warning...

... someone did it.

😉

Show threadNazo2d ago

@JohnJBurnsIII @ai6yr Lol, jokes aside, someone probably towed one or something.

Still, it definitely would be bad.

Show threadJohn Burns2d ago

@nazokiyoubinbou @ai6yr

The barrow tires are same as what's on my 4 wheel cart... and they have tubes in them and cannot support the weight they say they can - at recommended highest pressure... (800 lbs).

I could only get 400 ish lbs on it - before it could not be pulled through grass. On ashphalt - yes... but rolling on 3" grass was no-go.

---
Can't imagine someone tries to use those cheap cart tires for anything where human life is at stake.

Show threadNazo2d ago

@JohnJBurnsIII @ai6yr Honestly I imagine it's more of an issue of they can't handle that speed. At a speed like that a weaker tire would just rip itself apart.

Someone probably towed one at the back of a vehicle or something. I can imagine the tire probably blew and sparks were flying. I also imagine they didn't notice and kept going until police pulled them over or something. 🙄

Show threadGreg Parker
@nazokiyoubinbou @JohnJBurnsIII @ai6yr I bet somebody took a wheelbarrow wheel and used it on a car when they didn’t have the right spare.
Apr 10 at 3:00amWeb
Show threadNazo2d ago

@gparker @JohnJBurnsIII @ai6yr It's the wrong size. That's impossible.

...

....

Oh god, someone probably tried it anyway.......