Pete Prodoehl 🍕I wrote up a longer post about the halftone printing plate (and print) I made...
https://rasterweb.net/raster/2026/04/04/halftone-printing-plate/
Ember in the Pattern Buffer@rasterweb this is a neat approach! I’ve got a couple wood blocks to try printing. My approach was laser engraving the negative space. I’m wondering how halftone engraving with the laser would go now
@maddiefuzz I used to laser etch my plates but had too many issues, mostly due to my crappy laser cutter, so I switched to 3D printing.
Halftones should would great for laser etched plates. You'll just need to figure out how small of a dot/line you can get away with.
Same problem, just different challenges. 😉