So I originally shot this back in 2020 from my in-law’s house in a Bortle 4 area. Only got a handful of LRGB subs because my guide cam did not wanna talk to my laptop for most of the session back then. Recently I decided to shoot some Ha from my B9 apartment and give it a reprocess in HaLRGB. Overall I’m very pleased with this improvement after 6 years! Captured captured in February 2020 and December 2025 from bortle 4 and 9, respectively.

Places where I host my other images:

Flickr | Pixelfed

Equipment:

  • TPO 6" F/4 Imaging Newtonian

  • Orion Sirius EQ-G

  • ZWO ASI1600MM-Pro

  • Skywatcher Quattro Coma Corrector

  • ZWO EFW 8x1.25"/31mm

  • Astronomik LRGB+CLS Filters- 31mm

  • Astrodon 31mm Ha 5nm, Oiii 3nm, Sii 5nm

  • Agena 50mm Deluxe Straight-Through Guide Scope

  • ZWO ASI-290mc for guiding

  • Moonlite Autofocuser

Acquisition: 9 hours 55 minutes (Camera at unity gain, -15°C)

  • Ha - 48x600"

  • L - 12x300"

  • R - 4x300"

  • G - 4x300"

  • B - 3x300"

  • Darks- 30

  • Flats- 30 per filter

Capture Software:

  • Captured using N.I.N.A. and PHD2 for guiding and dithering.

PixInsight Preprocessing:

  • BatchPreProcessing

  • StarAlignment

  • Blink

  • ImageIntegration per channel

  • DrizzleIntegration (2x, Var β=1.5)

  • Dynamic Crop

  • DynamicBackgroundExtraction

duplicated each image and removed stars via StarXterminator. Ran DBE with a shitload of points to generate background model. model subtracted from original pic using the following PixelMath (math courtesy of /u/jimmythechicken1)

$T * med(model) / model

Luminance linear:

  • BlurXterminator

  • StarXterminator to completely remove stars (extracted stars processed separately)

  • STF applied via HistogramTransformation to stretch nonlinear

Ha Processing:

  • StarX to remove stars

  • Subtracted red continuum to create a ‘clean’ Ha image using pixelmath

  • Pixelmath to combine the clean Ha image into the RGB image

largely following this advanced narrowband combination guide, also made by jimmy

RGB Linear:

  • Channelcombination to make color image from RGB stacks

  • SpectrophotometricColorCalibration

  • StarX to remove stars (to be used for star addition later)

  • PixelMath per the advanced narrowband guide to add Ha into the red and blue channels

  • ArcsinhStretch + HistogramTransformation to stretch nonlinear

  • Slight curves saturation boost and histogram adjustments

Stars only image:

  • BlurXterminator for discortion correction and some mild star reduction

  • HSV repair

  • ArcsinhStretch + HistogramTransformation to stretch nonlinear (less aggressive stretch)

  • Slight curve adjustments

Nonlinear Processing

  • LRGBCombination to combine stretched RGB and L images

  • DeepSNR Noise reduction

  • Shitloads of curve transformations to adjust luminance, contrast, saturation, etc

  • More curves

  • LocalHistogramTransformation

  • Pixelmath to add in the stretched stars only image from earlier

    This basically re-linearizes the two images, adds them together, and then stretches them back to before. More info on it here

    mtf(.005,

    mtf(.995,Stars)+

    mtf(.995,Starless))

  • NoiseXTerminator for some small scale chrominance noise reduction

  • Resample to 70%

  • DynamicCrop in on just the galaxy (not a whole lot going on in the background)

  • Annotation