Mastodawn

#ISP failover setup has arrived!

- #Unifi 5G oudoor (PoE)
- 50m of CAT7 outdoor cable
- SIM card in the process of CGNAT removal

If the weather holds, it will be a "work" weekend!

Internal (non-ideal) testing. The modem is indoors atm for adoption and update.

The speeds are lower as expected, but the whole setup works. This was too easy.

Connect, adopt, update, done. Failover ready.

It took about 10-13 pings to switch over. Quick enough in my book.

Stage 2 complete. CAT7 cable is ready and it goes from UDM to the outside end position.

Need to attach the RJ45 connectors and mount the modem in place.

This will wait until th weather clears. One more stage to go.

(also, GSM ISP still didn’t remove CGNAT. I mean how long does it take to configure a single SIM?)

Stage 3, done. Mounted and connected end to end. All is working!
#ISP #Unifi #selfhosting #selfhosted #homelab #networking

A proper rain shower today and whole last night. Testing #Unifi5GMaxOutdoor IP67 rating ;)

Finally, the ISP has removed CGNAT and gave me a public IP address for the GSM service.

Now the failover setup is complete, and with #docker driven #cloudflare updater "favonia/cloudflare-ddns", all is in place.