DanielPaFeb 8
Kurt Kremitzki
#Design for #3Dprinting (using #FreeCAD) https://blog.rahix.de/design-for-3d-printing/
Design for 3D-Printing - Rahix' Blog

Deep dive into mechanical design that is optimized for 3d-printing.

Feb 7 at 5:04pmWeb
Show threadStewart RussellFeb 7
@kkremitzki That's a great guide. We were exploring these issues at Makers Making Change a while back, but this is much more comprehensive.
Show threadMichael K JohnsonFeb 7

@kkremitzki Shortly after writing that, @rahix also wrote some FreeCAD macros to help:

https://blog.freecad.org/2025/05/23/fused-filament-design-addon/

Fused Filament Design Addon

A short while ago we posted here about an excellent article by Rahix describing some really interesting and useful design approaches for fused filament style 3D printing. If you haven't checked out…

FreeCAD News
Show threadFreeCADFeb 9
@kkremitzki as featured on our blog Kurt! https://blog.freecad.org/2025/05/08/design-for-3d-printing-an-excellent-article/ was also fabulous to meet Rahix irl in the Open Hardware devroom the other week! /Jo
Design for 3D Printing, An Excellent Article

It's wonderful when people take the time to share the expertise they've developed. Even more so when the resulting article is filled with FreeCAD screenshots. Fabulous FreeCAD user Rahix has put to…

FreeCAD News