A ver si alguien del mundillo de la #bicicleta urbana de Madrid está por aquí y me puede ayudar:

Estoy buscando a alguien que tenga una #Muli (la #bici de carga o #cargobike que veis en la imagen https://muli-cycles.de) para probar si la altura mínima del sillín nos vale. Zona #Madrid idealmente (o #Galicia en las próximas dos semanas), pero nos podemos desplazar un par de cientos de kilómetros si hace falta.

Si no, ¿algún foro, lista de correo u otro canal por el que preguntar?

@eldelacajita this forum is in german but replies can be in english... there was someone from poland a few weeks ago too :) https://www.cargobikeforum.de/forum/index.php?threads/muli-das-neu-flexibel-lastenrad-für-die-stadt.1709

you can also ask muli directly. what values are you looking for? just the lowest possible distance from the top of the saddle to the ground or to the pedals?

muli - das neu flexibel Lastenrad für die Stadt

Hallo, mein Name ist Sören und gemeinsam mit meinem Bruder habe ich ein neues Lastenrad entworfen. Es ist trotz tiefliegender Lastenfläche sehr kurz, hat einen klappbaren Korb und lässt sich nahezu wie ein herkömmliches Fahrrad fahren, wenn man gerade keine Lasten oder Kinder transportiert. Es...

Cargobike-Forum

@stefanct I believe the relevant measure would be the lowest distance from the top of the saddle to the pedal and it should more or less match the "inseam" length of the leg.

We wanted to try it because the company states that the bike should be usable down to 150-155 cm height, but that's a very narrow margin to work with. My partner is 150 cm high and has rather short legs.

But thanks a lot for the pointer! I may try asking around.

@eldelacajita @stefanct the partner (me) 🥲🥲🥲 😅🤣
@carabiru @eldelacajita i don't own one (yet) so i can't really help you further unfortunately. testing it before buying is a must in my opinion anyway. however, one thing you could do is replace the suspension seat post with a regular one. that should give you a few more cm to work with. in theory there exist shorter pedal cranks too but i am not sure if there are any potential compatibility issues. good luck!

@stefanct Thanks for the tips! We were also thinking of 3D-printing a riser for the pedals. I'm not sure how well that would work, but it may be worth a try if it's a matter of a couple cm.

@carabiru