Tube🌿Timewelp, how'd i get into THIS situation? let's rewind...
on the back, we have the usual semi-cursed 13W3 video connector and the Sun keyboard connector. where am i going to find a Sun keyboard?
i just happen to have one, new in box! i bought this years ago at Weird Stuff Warehouse when they were still around. i have no idea why, but i'm glad i did.
however, they have RJ11 connectors and the keyboard (which is where the mouse plugs in) just has a mini-DIN connector. uh oh.
which brings me back to here. does this mouse, despite the connector difference, use the same protocol?
looks like it is essentially the same protocol as the version of the mouse (type 4?) designed for the SPARCstation. the output is open collector, inverted async serial, 5 byte.
time to build an adapter. the connector is RJ11 (technically 6P4C) but it has these pins sticking out, presumably so you can't plug it into a phone jack.
four months later 
i made the Video Snake Oil board that can adapt 13W3 (any type!) to VGA. you just wire up the little pads to whatever your machine needs.
i made the Video Snake Oil board that can adapt 13W3 (any type!) to VGA. you just wire up the little pads to whatever your machine needs.
i've also installed a ZuluSCSI. this neat little board is a lot cheaper than a SCSI2SD. i'm going to try and install Solaris using a CDROM ISO file. CD6_512.iso is placed on the SD card. it'll be ID 6, 512 bytes per sector.
well, it tries to boot from the CDROM but suffers a BAD TRAP. not sure why, maybe i need to update the IDPROM contents.
yeah i am guessing the machine type in the IDPROM is invalid so the installer runs the wrong code.
wrote a little FORTH program to update the contents of the IDPROM, and it looks like it has a valid host id now.
forgot to add that i needed to do a "set-defaults" and a "setenv diag-switch? false"
uh oh, RAM parity error. i'm hoping U676 isn't seated all the way and that it is an easy fix.
that did the trick. the SIMM sockets were very stuck. welcome to S O L A R I S!
spoke too soon. another parity error, this time at U677. why there? because that's where i moved the module that was at U676. think i will just pull that bank of RAM for now.
it seems to run with 12MB RAM. no more parity errors this time. but now the installer hates my SCSI drive (a ZuluSCSI).
filesystem creation failed for / 🤔
Chris Gerhard 
@tubetime you just need to port solaris 10 to it and then as long as the memory error is not in kernel memory the process would be killed and the location blacklisted.
Kevin Karhan 
@tubetime owo...
i hope you saw @ncommander 's #Solaris livestreams...
Darren@tubetime I like how "WARNING" is all caps and "panic" is kept on the down-low with no caps.
I guess 'panic' has another meaning than what is coming to mind.
Eric Carroll@tubetime
It has been years since I last saw
le0 no carrier log messages.
Thanks for that!
Stephen Bannasch (316 ppm)@tubetime once wrote a simple Forth-like language I called “go” written in 68000 assembler that interactively compiled lines directly to 68000 machine code. Ran on an original Mac 128k ;-)
Chris L@stepheneb @tubetime yeah forth is so easy to bootstrap. I think I had a small forth-ish for 6502 based on reading about it in Byte. I was so happy when Apple and Sun bundled forth as boot loaders. Also tube time should do a Sun 4/260. That was my first Unix machine, got surplus and loaded it down with internet software in mid 90s. The lights flickered when it powered on.
@stepheneb @tubetime ahh GraForth! That concept hasn’t been active in my brain for decades, and all I can concretely remember is a feeling of happiness and a love of parabolas and hyperbolas.
Emelia/Emi@tubetime fun, will probably have to do something similar to get my flea market find (a SparcStation IPX) running, turns out the console cable I bought is horribly broken (it has *really* high resistance between the pins on the DB-9 and the DIN for some reason) so the console output is "absolutely mangled" to the point of regularly dropping bits. The general structure is correct, and the occasional word (SelfTest FAILED surrounded by random mojibake-looking stuff) but it's utterly unusable. I probed it on the DB-9 end and it was barely signalling at all, even with the line driver set at the full +-12v of RS232. Almost as if the cable itself is actually *broken* internally...
yakkoj 🦊@tubetime I had to do this for my lunchbox machines (an IPX and an LX)
But for my Sun Blade 100, I had to do a whole different thing to recover the IDPROM
of the three machines, only the IPX got a modern IDPROM replacement. The others have CR2032s with holders hacked in. :o( (though not the Duct Tape Special you had!)
Mike Spooner@tubetime Check the RAM. Bad modules can cause the "bad trap" error in Solaris on SPARC, although other things can, too.
Jonathan ‘theJPster’ Pallant@tubetime Doesn't ISO9660 use 2048 byte sectors?
@thejpster yes but these old workstations require 512 byte sectors for their cdroms in order to boot
Rob Isaac@thejpster @tubetime One of the quirks of the early sun machines is a reliance on 512-bytes-per-sector CD-ROMs. It’s not as impossible as it sounds, because many of the contemporary SCSI CD-ROM drives also support a mode select command to enable it.
jgeorge@tubetime I wonder if that would emulate an image that’s, say, 520 bytes per sector…
MUSE Bi-Vision@tubetime This inspires me - I have a VAXStation that uses a 3W3 video output (basically 13W3 without the digital pins) and it's impossible to find cables for it, but there are connectors for it around
Do you do any termination or anything active on the board? I've made an RGB port adapter before and got pretty bad ringing, but it could definitely just be the monitor I used since I had no other way of testing.
@nkizz no termination, that is done in the VGA monitor (75 ohm)
Yves Luther@tubetime I need this board in my life. Twice. Maybe three. Where can I buy them?
@yves i'll be releasing it on github soon. need to write documentation and so forth.
shuppy
Anthony Sorace@a for the video you can use this adapter: https://github.com/schlae/13W3
for the keyboard it is literally just a serial port, you could do it with an rpi or an arduino quite easily
@delan @tubetime Oh, this looks awesome! I love that you put in stuff like the idprom macro; great touch I wouldn’t have thought of. I’d still like to get something going with the (non-pico) pi because I want to treat it as a wifi pseudo-bridge, but given how far underwater my project list is, maybe I’ll start with this.
Mᴀʀᴋ VᴀɴᴅᴇWᴇᴛᴛᴇʀɪɴɢ@tubetime I'm having flashbacks to the early 1990s.
Pete / Syllopsium@tubetime What you need is a Belkin F1DE083UK - adapts to a PS/2 keyboard fine, also cheap, but I had no luck with the 13W3 to VGA connector - needed a separate adapter for that. There's also the Raritan APSSUN which may work better but was too expensive to ship to the UK, but not a problem for you?
John Wilson@tubetime that font is giving me flashbacks
Papá Robot@tubetime abomination!
lymenzies@tubetime Does that work ok on a multi-sync monitor without sync-on-green?
David Cantrell 🏏@lymenzies @tubetime IIRC it was SGI where you needed sync-on-green
Nick Poole
smells of bikes@North This is glorious, particularly the cap.
Tony Finch@tubetime oh THAT might explain the ghosting in the screenshot i saw first 😱
@fanf yep exactly! we don't need signal integrity for this test.
Tom "Clydeswimmer" Slider@tubetime I haven't seen a 13W3 cable in a long time! That is quite a project!
Slaíne