A Promising Start for the Doritos Space Program

Rocketry is tricky stuff, but as long as you're not trying to get into space, the whole idea can basically be boiled down into a simple concept: if you put enough thrust behind it, anything can fly. At least, for awhile. It's this basic premise that allows what hobbyists sometimes refer to as "Odd-Rocs" fly; these unusual objects might not be ideal rockets, but put a big enough motor in there, and it'll get off the pad.

Recently, [concretedog] thought he'd try putting together his own oddball rocket, and set out to modify a Doritos STAX tube for powered flight. There's plenty of precedent for turning Pringles tubes into rockets, but of course, that's hardly surprising. After all, what's a rocket if not a strong and lightweight cylinder? But the rounded triangular shape of the STAX tube promised to be an interesting change of pace. Plus it looked cool, so there's that.

Turning the snack container into a rocket was actually pretty straightforward. To start with, [concretedog] sketched around the outside of the tube on a piece of paper, and then took a picture of that with his phone. That image was then brought into Inkscape, and turned into a vector file that he could fiddle around with in CAD.

Between the thin plywood cut on his laser and PETG loaded into his 3D printer, he was able to come up with a strong enough motor mount to take an Estes D12-5. He then created some fins to glue on the side, and a triangular nosecone. A simple recovery system was installed, and the whole thing was finished off with a Doritos-appropriate orange and black color scheme.

The unusual shape of the rocket meant simulating its flight characteristics on the computer wouldn't work without custom software, so [concretedog] had to use the old school method of checking stability by swinging it around in a circle on a string. After trimming it out so it would orient itself properly on the tether, he was fairly sure it would fly straight under power. Sure enough, the video below shows the nacho cheese flavored rocket streaking skyward with impressive speed and stability.

It's far from the most advanced model rocket we've seen recently, but we really appreciate the simplicity of this build. It's a great reminder that fun doesn't have to be high-tech, and that by following some basic construction principles, you can knock out a safe park flier rocket on a weekend.

#toyhacks #estes #inkscape #modelrocketry #pringlescan

A New Spin on 360 Degree Displays

Back in 2018, [Salah] created a prototype display that seems to defy logic using little more than a Pringles can and a fast motor. While not volumetric, this hack does show the same 2D image from any vantage point in 360 degrees around it.

How can cardboard create this effect? Somewhat like a zoetrope uses slits to create a shutter effect, this display uses a thin slit to limit the view of the image within to one narrow vertical slice at a time. When moving fast enough, Persistence of Vision kicks in to assemble these slices into a complete image. What we think is so cool about this hack is that the effect is the same from any angle and by multiple viewers simultaneously.

The project page and video demonstration after the break are light on details, though the idea is so simple as to not require additional explanation. We assume the bright LED seen in the video below was added to overcome the relatively dim appearance of the image when viewed through the narrow slit and isn't strictly required.

If you are a fan of modern updates to victorian display technology, be sure to check out the 3D printed zeotropes and phenakistiscopes by [Akinori Goto], [Jeremy], and [Greg Borenstein] too.

#ledhacks #360degree #customdisplay #persistenceofvision #phenakistoscope #povdisplay #pringlescan #zeotrope