📡 Cronache dal Sacro Palo del LoRa

Oggi possiamo dirlo con una certa soddisfazione tecnica, morale e leggermente vendicativa.

Il nodo funziona.
L’antenna è montata.
Il cavo è ragionato.
E soprattutto, non c’è il presepe degli adattatori.

Perché sì, nel meraviglioso mondo delle radio, ogni tanto compare il Grande Sacerdote del “devi fare così”, quello con l’aria da professorone, la tabella in mano e tre adattatori SMA/N/BNC/boh infilati uno nell’altro come se stesse componendo una canna da pesca rituale.

Io invece ho fatto una cosa molto più noiosa, quindi pericolosamente sensata.

Trasmissione a 27 dBm.
Circa 2 metri di RG58, con una perdita stimata intorno a 1,5 dB.
Antenna da 3 dBi.
Niente adattatori inutili.
Niente castelli traballanti.
Niente “fidati, l’ho visto su YouTube”.

E qui arriva la parte bella.

Il conto non si fa buttando tutto nello stesso pentolone, perché dBi, ERP ed EIRP non sono la stessa cosa.

L’antenna è dichiarata in dBi, cioè rispetto a un’antenna isotropica teorica.
Il limite invece si ragiona in ERP, cioè rispetto a un dipolo reale.

Traduzione per umani normali:

EIRP guarda il segnale rispetto all’antenna isotropica immaginaria.
ERP guarda il segnale rispetto al dipolo.
La differenza è circa 2,15 dB.

Quindi una antenna da 3 dBi equivale a circa:

3 dBi - 2,15 = 0,85 dBd

E allora il conto reale in ERP diventa:

Potenza trasmessa: 27 dBm Perdita cavo/connettori: -1,5 dB Guadagno antenna in dBd: +0,85 dB ---------------------------------------- ERP finale stimata: 26,35 dBm

Limite pratico della banda interessata:

500 mW ERP ≈ 27 dBm ERP

Risultato:

26,35 dBm ERP < 27 dBm ERP

Quindi sì, con questa configurazione si resta sotto il limite.

E allora il famigerato RG58 da 2 metri, invece di essere il cattivo della storia, diventa praticamente il funzionario dell’ufficio regolamenti.

Un po’ rallenta.
Un po’ smorza.
Un po’ dice, “calma ragazzi, qui si resta nei limiti”.

Risultato?

Nodo accessibile.
Antenna esterna.
Cavo unico, pulito, senza adattatori in cascata.
Configurazione comoda anche per chi deve poterci arrivare fisicamente senza arrampicarsi come uno stambecco caffeinato.
E soprattutto tutto funziona da giorni.

La morale è semplice.

Non sempre la soluzione migliore è quella più estrema, più lunga, più lucida, più piena di dB dichiarati in stile televendita.

A volte la soluzione migliore è quella che puoi montare, controllare, mantenere e capire.

Il resto è folklore da banco radio.

📡 Il nodo parla.
📶 Il segnale passa.
📏 I conti tornano.
🧙‍♂️ Il professorone borbotta.

E io, modestamente, mi godo il LoRa senza il rosario degli adattatori.

https://www.loraitalia.it/wiki/normativa/

#Meshastic

#LoRa

Normativa - Lora Italia

Meshtastic e la EU_868 I dispositivi LoRa possono usare diverse frequenze per il loro funzionamento: la modulazione LoRa è in sostanza indipendente dalla frequenza di ricetrasmissione, un pò come dire che potete trasmettere in FM su qualunque frequenza (se siete autorizzati !). Per favorire un uso legittimo di LoRa da parte di chiunque (quindi un […]

Lora Italia
Offenbar war das nicht so clever, mir ein #meshastic all-in-one Gerät zu holen.
So komm ich nicht an die per URL geteilten Grupen. 🤔

Oh Meshtastic, sometimes I am getting crazy...

As already done two times before I added a INA226 and MT3608 to a node, no big deal. Delivery steady 5V and measure the real battery voltage. Worked fine so far.

Now Meshtastic is showing a voltage of 1,59 V and a current of 178,9 mA on channel 3. For the other nodes it is channel one and 3.X V and a current of 20-40 mA.

Probably I forgot something but what is wrong here?

The INA226 does not have 3 channels!

https://social.0x520.eu/@finn/statuses/01KH4R7Z82NQX5M4AMR2801JNG

#Meshastic

Finn (@[email protected])

[2 media attachments] I am using the Seeed XIAO nRF52840 kit as a solar powered Meshtastic node with LiFePo4 batteries. These batteries have a nominal voltage of 3.2V and the node is even still running at around 2.9V until it dies. But does it run "well" with these low voltages? Maybe not... So I added a MT3608 step up converter which gives me a steady 5V voltage now. To keep track of the real battery voltage I added a INA226 sensor which reads the voltage and current. Unfortunately it doesn't work out of the box as mentioned here: https://github.com/meshtastic/firmware/issues/7670 The SDA/SCL pins as shown in this diagram are by default found at D4 and D5 as shown here: https://wiki.seeedstudio.com/XIAO_BLE/ Those are already in use by the LoRa hat and don't work. If you are not using the L76K GPS modules you can use the pins D6 (SDA) and D7 (SCL) instead after recompiling the firmware: git clone https://github.com/meshtastic/firmware.git cd firmware git submodule update --init --recursive # maybe checkout the latest release tag if you don't want to compile bleeding edge: git checkout v2.7.18.fb3bf78 # to prevent hitting the flash size limit edit this file vim variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini ; Seeed Xiao BLE but with GPS undefined, and therefore i2c active [env:seeed_xiao_nrf52840_kit_i2c] extends = env:seeed_xiao_nrf52840_kit board_level = extra build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -DSEEED_XIAO_NRF52840_KIT -UGPS_L76K ;build_unflags = -DGPS_L76K # now compile pio run -e seeed_xiao_nrf52840_kit_i2c # flash this file the usual way .pio/build/seeed_xiao_nrf52840_kit_i2c/firmware-seeed_xiao_nrf52840_kit_i2c-2.7.19.a092f6b.uf2 #Meshtastic #I2C #INA226 #MT3608

social.0x520.eu
New mobile node: seeed studio T1000-E tracker.

#Meshastic

@n1kdo looks like @bayme.sh is doing / has done #meshastic nodes on balloons - that would put its usefulness in the same realm as APRS trackers.

https://mastodon.radio/@bayme.sh@bsky.brid.gy

https://youtube.com/live/j7MsniL_C3I

Mastodon.Radio

Hello les passionnées de #meshtastic, la #communauté #gauix est heureuse 😍 d’annoncer en partenariat avec l’association Sono solaris la première journée de rencontre régionale, Auvergne Rhône-Alpes, technique sur le thème #réseau Gaulix basé sur #meshastic.

Réservation par ici

https://gaulix.fr/inscription-a-la-journee-radio-du-8-mars/

@meshtastic @f4eed

#emcom #Crise #telecom #citoyens #rencontre #echange #radio

Inscription aux premières rencontres Gaulix/Meshtastic de la région auvergne Rhône Alpes radio du 8 mars - Gaulix

L’association Sono solaris et Gaulix sont heureux de vous annoncer la première rencontre technique Gaulix pour la région Auvergne Rhône Alpes (mais c’est ouvert à tous les département même Hors région). • Elle aura lieu le samedi 8 Mars 2025 de 10:00 à 18:00 sur la Commune de Saint Appolinard.• Le repas de midi pourra […]

Gaulix
Škoda, že neexistuje třeba #meshastic síť, nebo tak https://mstdn.party/@legalquilts/113217149662253822
LegalQuilts (@[email protected])

I know there are some ham radio operators on here. Boost and spread the word. With cell and telephone service down in Easyern NC the only way to communicate may be ham. Please help if you can. #Helene #NorthCarolina #HamRadio

Mastodon Party