Browning BL22 – Test plates to check the bolt closure (misfires)
The misfires in the Browning BL-22 were caused by a locking plate that was no longer within the correct dimensions. This issue is well documented on this website. At one point, I 3D printed a few test plates, which made it easy to measure and determine the proper dimensions needed to eliminate the excess…
---
https://3xn.nl/projects/2025/05/30/browning-bl22-test-plates-to-check-the-bolt-closure-misfires/
---
#Bl22 #bl22 #bolt #browning #misfire #repair #tinkercad
[FIXED?] Browning BL-22 misfires
Next to some other issues that I have with my Browning BL22 is that it very often misfires. And after a lot of thinking, trial and error, I think I have found the issue. Remember the post about the little plate that came loose? The misfires are related to this as far as I have been able to figure out. There is a locking block that locks itself via this little plate. …
---
https://3xn.nl/projects/2025/03/11/fixed-browning-bl-22-misfires/
---
#bl22 #browning #fixed #misfire
[FIXED?] Browning BL-22 misfires – Fox’s Projects

[FIXED] Browning BL-22 Bolt Fault
It is the second time that I have to fix this issue where the trigger fails to release the hammer. Symptom: The lever is not closing completely and then you cannot pull the trigger. Cause: There is a small piece of steel in the “roof” of the action that has come loose and slides forward. Fix: Fix the steel insert in its place, now with a…
---
https://3xn.nl/projects/2024/08/01/fixed-browning-bl-22-bolt-fault/
---
#action #bl22 #bolt #browning #DIY #misfire #repair #rifle
[FIXED] Browning BL-22 Bolt Fault – Fox’s Projects

Fixing an issue with my Browning BL22 (Lever not closing)
After cleaning out my Browning BL22 and replacing some springs, I experienced an issue with the lever on a regular basis. I took it apart again, checked everything, only to have it re-appear again. Then I noticed that a small plate in the roof of the rifle’s action housing had come loose. After some investigating, I deduced th…
---
https://3xn.nl/projects/2024/05/19/fixing-an-issue-with-my-browning-bl22-lever-not-closing/
---
#bl22 #browning #lever #loctite #repair #rifle
Fixing an issue with my Browning BL22 (Lever not closing) – Fox’s Projects