Mastodawn

Maggus Söder möchte offenbar nicht, dass dieses Video weiterverbreitet wird. Bitte also auf keinen Fall teilen. Sonst wird am Ende noch behauptet, man betreibe damit auch noch Klimaschutz.

Ric 1d ago

u880d 2d ago

Alter! Der beste Post bei #heise im Forum seit Wochen.
https://www.heise.de/forum/heise-online/Kommentare/Europaeische-Cloudanbieter-Broadcom-setzt-zum-Todesstoss-an/An-alle-VMware-Admins-die-gerade-flennen-Haltet-die-Fresse-und-lest/posting-46107573/show/

heise online

News und Foren zu Computer, IT, Wissenschaft, Medien und Politik. Preisvergleich von Hardware und Software sowie Downloads bei Heise Medien.

heise online

Ric 3d ago

Torsten Grote 4d ago

Google has news on what you will need to do for still being able to sideload apps:

* enable developer options
* confirm that you are not tricked
* restart phone and re-authenticate
* wait one day
* confirm with biometrics that you know what you are doing
* decide if you only want unrestricted installs for 1 week or forever
* confirm that you accept the risks
* enjoy the few apps that still have developers motivated to develop for a user-base willing to put up with this

https://goo.gle/advance-flow

Ric 4d ago

KOHN der baba 4d ago

Ric 4d ago

Pfadfinder St.Elisabeth Erfurt 5d ago

Wir, der Stamm St. Elisabeth, laden euch alle herzlich ein, mit uns zusammen im Erfurter Nordpark am 21. März ab 9 Uhr einen Frühjahrsputz zu machen. Treffpunkt ist die Pappelstiegbrücke. Weiter Infos unter: https://pfadicloud.dpsg-thueringen.de/apps/forms/s/sWwCd9CJgDc3NL9trSmMWXDX

Mit unserer Müllsammelaktion wollen wir die Welt ein bisschen besser hinterlassen, als wir sie vorfinden.

#dpsg #pfadfinden #müllsammelaktion #erfurt

Ric 6d ago

Nath Jan 25, 2022

Somewhere, someone finally made this and I think it's beautiful: https://www.thingiverse.com/thing:4687836

Ethernet | RJ45 clip to secure/repair/fix broken tab by guss67

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install.UPDATE v.4.9 | 28/01/2021Added the 3 following files which have slightly wider body (0.25mm) than 4.7 version and small upgrade on the tip.1. "4.9.nf.supported" (extension) comes "with supports" for the ones are not very familiar with. But I still prefer S3D's supports.2. "4.9.nf" (extension) with "no fillet", to make it easier printing with supports.3. "4.9" (extension) with fillet, for "smooth edges". On FDM printers isn't that much noticeable.UPDATE v.4.7 | 01/01/2021Added another version with "no fillet" (".nf" extension), actually it has sharp edges to make it easier printing with supports.PrintingSuggested printing orientation is the one as the files are stored, why?Printing the tab from the base to the tip in X-Y axis makes it stronger and more flexible since its printed in one continued string.If you change the orientation with the tip on top then tab's base will start from the bottom and builds up while the Z axis is sticking the rest of it till the tip. With this orientation the tab has more possibilities to brake since Z layers don't bond the same as the method I suggested.*If you have another solution let me know.Supports Supports needed and you need to be experienced with good slicer settings. Also attention needed when removing them from the actual print.Or you can print the file with "4.9.nf.supported" (extension) which comes with supports. But I still prefer S3D's supports.Installation note:1.Before install the "printed clip" check the left overs of the broken tab. If it is too long the tip of the "printed clip" might not click underneath the left-over. So, I suggest to leave a length of the broken tab about "0,5-1,0mm". If the broken tad left-over is to small or cuted flash then the printed one might not click and hopefully that would work well, haven't tested that scenario.2.Follow the sketches to install the "printed clip", also while sliding in if you find it a bit hard some wiggling might help.*You may call it the "ScorpioNet" or "Devil's Network Tail"! Designed in InventorIf you enjoy and want to support my work you can donate me on the link below,Thank you!

Thingiverse - Digital Designs for Physical Objects

Ric Mar 16

Andy B. Scheuert Mar 16

Friedrich Merz’ geniale 50-€-Rentenlösung: Sparen Sie sich arm!

Der Erfinder der „Bierdeckel-Steuerreform“ und der „Kanzlerschaft ohne Plan, aber mit viel Selbstbewusstsein“ hat uns mal wieder mit einer „Innovation“ beglückt:
die 50-€-Altersvorsorge

„Die Menschen müssen früh genug anfangen, für ihr Alter zu sparen“, mahnt Merz – und vergisst dabei geflissentlich, wie die Lebensrealität für die meisten Menschen aussieht. Wenn man nach der Miete nur noch heizen oder essen kann.
1/
🧵

Ric Mar 15

Blake Patterson Mar 15

The announcement out of AwesomeCon has come.

Nathan Fillion and Crew Reunite for ‘Firefly’ Animated Series

https://www.thetvcave.com/post/firefly-animated-series-what-we-know

"Grab your brown coats and a very expensive bottle of Mudder’s Milk, because the impossible just happened. After two decades of "maybe next year" and enough fan petitions to paper the entire Verse, Nathan Fillion has finally stopped teasing us on Instagram and dropped the big one: a Firefly animated series is officially in advanced development."

The series takes place between the original TV series and Serenity, the film.

#IAimToMisbehave #Firefly #Serenity #AwesomeCon #nathanfillion #animation #animatedseries #entertainment #entertainmentnews #hollywood #SciFi #nostalgia #actors #spacemovies #ScienceFiction

Nathan Fillion and Crew Reunite for ‘Firefly’ Animated Series—Here’s What We Know

Grab your brown coats and a very expensive bottle of Mudder’s Milk, because the impossible just happened. After two decades of "maybe next year" and enough fan petitions to paper the entire Verse, Nathan Fillion has finally stopped teasing us on Instagram and dropped the big one: a Firefly animated series is officially in advanced development.Announced during a high-octane reunion at Awesome Con, the project isn't some low-budget cash grab or a "spiritual successor" with none of the charm. We’re

The TV Cave

Ric Mar 12

Digitale Selbstverteidigung Mar 12

Du bist Terrorist

In 2 Minuten erklärt...

Ric Mar 12

Andreas Grupp

Mar 12

Es ist seit fast 2,5 Jahren bekannt, dass #Microsoft sich beim "neuen #Outlook" ...

⚠️ die Zugangsdaten von Mailkonten, wohlgemerkt von welchen die bei anderen Providern liegen, speichert

⚠️ beim Mailabruf die Mails über die eigenen Server schleust, wobei unklar ist ob sie dabei den Inhalt "verarbeiten" (z.B. auch für KI), die Metadaten "verarbeiten", ...

... und irgendwie scheint sich das nicht herum gesprochen zu haben, oder es ist den Konteninhabern total egal, ich weiß es nicht 🤷. Aktuelle Analyse, auf einem System von #eduBW, zeigt klar die Nutzung des "neuen Outlook", trotz Schulungsunterlagen auf #Thunderbird-Basis 😟.

Liebe Kolleg:innen, stellt das ein, verbreitet dieses Wissen, schult eure Schüler:innen, ... . #DigitaleSouveränität geht anders! 🤦‍♂️

https://www.heise.de/news/Microsoft-krallt-sich-Zugangsdaten-Achtung-vorm-neuen-Outlook-9357691.html #FediLZ

Microsoft krallt sich Zugangsdaten: Achtung vor dem neuen Outlook

Das neue kostenlose Outlook ersetzt Mail in Windows, später auch das klassische Outlook. Es schickt geheime Zugangsdaten an Microsoft.

heise online

Signal (E2EE messenger)	https://signal.org
Threema (E2EE messenger)	https://threema.ch
Debian (operating system)	https://debian.org
My little wiki	https://wiki.abschweifen.eu/