My first ever build, a Lily58
- 0 Followers
- 0 Following
- 1 Posts
Here are the parts that I used:
PCB: Lily58 pro MCU: Splinky rp2040 Switches: Akko v3 pro Lavender purple Keycaps: Tuzi in XDA profile
With custom built cables, and just a front and back plate that I got along with the PCB.
After many troubles, I have completed my first ever keyboard build, my very own Lily58
After quite some amount of troubleshooting, I have completed my first ever keyboard build with a Lily58
I need some help with my lily58 build
I need some help with my lily58 build - Lemmy.World
Gotta preface this by saying this is my first ever keyboard build, and pretty much my first time soldering something involved. But anyways, I got the left half working, even with my slightly shoddy soldering, and was feeling pretty confident. Finished off soldering the right half and checked for bridges with a multimeter and that looked fine. I flashed the same firmware that I used on the left to the right half. And then connected them together and plugged in the usb on the left half. The left half was working as usual, but the right half didn’t recognise any inputs. It showed the lily58 logo but that was all that was showing on the oled. I disconnected the halves and connected only the right half, and all the keys were being detected as if it were the left half but mirrored to the right. What have I done wrong?
