#voron #3dprinting build update

- Top down webcam installed
- skirts replaced (cracked a display support, need to reprint... Someday)
- lights installed and setup
- smart filament sensor wired (needs testing)

Todo:
- replace can cable
- input shape tuning
- move downstairs
- try out klippain

The #voron build continues.

- Installed 5015 blower fans to recirculate the chamber today.
- Replaced the rail mounts with versions with bearings.
- shifted rails up a bit to make room for corner belt covers
- mounted and routed a USB webcam (need to setup

Todo:
- led strip wiring
- swap skirts with abs parts
- clean up wiring
- mount bottom panel
- replace can cable and mount to hot end

#3dprinting

A box full of skirts and black abs parts to install

Switching to red accent part printing. Will be flipping to bed to textured parts after this print

#voron #3dprinting

Still working my way thru functional printed parts for the #voron

Mounted a Pi Camera 3 (tho the mount is too tight, need to grow it a bit)

Sealed the exhaust vent and remounted the umbilical cord on CAN cable

Todo:
- switch to red and print lots of accent parts
- mount and wire led strips
- wire filament sensor
- lots of panel clips to reprint in ABS
- maybe a top mounted webcam?

#3dprinting

Coworker was a much more competent plumber than Ill ever be, he'd renovated his bathroom and basement himself

He was comfortable with electrical.

He really just needed info

Turned out we share some hobbies, had some shared experiences, and it was a nice experience to chat while he worked and to provide commentary when it seemed prudent

Of the experience, Im most honored that my hyperfixation and research carried forward go help a peer!

4/4

Fast forward to today, a coworker I didnt know info

I quickly found pictures on my phone, email receipts, web links, etc

He said he wanted a plumber just cause he didnt know what brands were reputable and didnt feel like he had the time to research quickly.

Turned out I had the research!

I offered to help him setup after work, which turns out I didnt need to do

3/4

I settled on a Zoeller Spin 508 combo sump with dc backup system. Found it in stock at a local plumbing supply (did not offer to them that I was not a plumber, nor did I have an account)

Decided on a Fleet standard size 31 AGM battery that was available at Oreillys locally instead of buying the over priced Aquanot branded AGM

Installed, setup, and was very happy with the result, house safely out of risk from sump failure

2/4

At work today someone posted on Slack asking if anyone has any referrals for a plumber to install a sump pump

Last fall, I found ours had rusted out during a storm and the pump base had separated from the pump, I cludged it back together, but needed replaced asap

I spent the next days frantically researching and hyperfixating on learning about sump pumps

1/4

Finally got it started and wasnt extruding, i didnt close the extruder door correctly, so wasnt touching filament

Now its bed time

So maybe i can get thru squish and pressure advance tomorrow

Ideally can start printing extuder flow calibration

So maybe i can get thru squish and pressure advance tomorrow

Ideally can start printing extuder flow calibration

#voron #3dprinting

3/3