I went for the PowerMac G4 MDD for #MARCHintosh running Sorbet Leopard (with some Adélie Linux in another partition).
Keyboard & Vintage Computer Nerd.
Located in Germany, Bavaria
darkcruix
- 12 Followers
- 24 Following
- 69 Posts
... and you don't like to have a wind tunnel on your desk.
I constantly had >68'C [154'F] when under 100% CPU load for more than an hour. I replaced all fans with Noctua but had to add one additional 92mm fan on top of the 120mm and 2 x 60mm behind the CPU heat sink to get everything under control.
I constantly had >68'C [154'F] when under 100% CPU load for more than an hour. I replaced all fans with Noctua but had to add one additional 92mm fan on top of the 120mm and 2 x 60mm behind the CPU heat sink to get everything under control.
ntFinally done with the WarGames 1:12 scatch build scale model of WOPR! 🤖
@xodium I have a perfectly working PB 3400 - so, I am lucky. I tried to find someone who could build a battery for it, but no luck.
My Quadra 700 is working fine, as long as there is no sound played, then it freezes up. I have tried replacing the tantalum caps around the sound chip but had no luck. Any advice what I could try?
Just received a pile of NOS Blue Alps switches for a later keyboard build. Relatively rare switches in this condition ...
Álvaro PrietoEver wonder if your USB C cable is USB2 or USB3? Do you have some charge-only cables hiding in a box just waiting for the right moment to spoil your project plans?!
Fear no more!
I’ve made a simple board to test most of the things!
