so uh
we rescued a set of 4K movie film scanners
does anyone need a set of 4K movie film scanners
if you have a need for a cinema film scanner (or can give it a good home!), and can arrange to have it transported from the Seattle area, message me on fedi or e-mail me at [email protected]
1. You can press `E` to view the event log, which will probably tell you what's going on.
2. If the upstream TLS certificate is "invalid", you may need to toggle `ssl_insecure` to `true`, in mitmproxy.
3. I'm sure you already have the mitmproxy certificate installed on the client.
In memory of the great and unforgettable Terry Hall 💔
March 19, 1959 – December 18, 2022
The Specials – Too Much Too Young
#punkrock #ska #skalegends #skabands #skamusic #terryhall #thespecials #2tone #history #punkrockhistory #otd
It sure is a cool and normal time to be working at a civil liberties non-profit in the United States.
https://www.cbsnews.com/news/fbi-irs-investigate-nonprofits-domestic-terrorism-links/
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install.UPDATE v.4.9 | 28/01/2021Added the 3 following files which have slightly wider body (0.25mm) than 4.7 version and small upgrade on the tip.1. "4.9.nf.supported" (extension) comes "with supports" for the ones are not very familiar with. But I still prefer S3D's supports.2. "4.9.nf" (extension) with "no fillet", to make it easier printing with supports.3. "4.9" (extension) with fillet, for "smooth edges". On FDM printers isn't that much noticeable.UPDATE v.4.7 | 01/01/2021Added another version with "no fillet" (".nf" extension), actually it has sharp edges to make it easier printing with supports.PrintingSuggested printing orientation is the one as the files are stored, why?Printing the tab from the base to the tip in X-Y axis makes it stronger and more flexible since its printed in one continued string.If you change the orientation with the tip on top then tab's base will start from the bottom and builds up while the Z axis is sticking the rest of it till the tip. With this orientation the tab has more possibilities to brake since Z layers don't bond the same as the method I suggested.*If you have another solution let me know.Supports Supports needed and you need to be experienced with good slicer settings. Also attention needed when removing them from the actual print.Or you can print the file with "4.9.nf.supported" (extension) which comes with supports. But I still prefer S3D's supports.Installation note:1.Before install the "printed clip" check the left overs of the broken tab. If it is too long the tip of the "printed clip" might not click underneath the left-over. So, I suggest to leave a length of the broken tab about "0,5-1,0mm". If the broken tad left-over is to small or cuted flash then the printed one might not click and hopefully that would work well, haven't tested that scenario.2.Follow the sketches to install the "printed clip", also while sliding in if you find it a bit hard some wiggling might help.*You may call it the "ScorpioNet" or "Devil's Network Tail"! Designed in InventorIf you enjoy and want to support my work you can donate me on the link below,Thank you!
Last night I networked my friggen Sega Genesis to my Game Boy Advance!! 🤩
Took a little troubleshooting, more details in the image ALT text, and the homebrew comes from here:
https://kyuchumimo.itch.io/match-4
alyx (dual-stack)
daniel:// stenberg://
Punkrock History
evacide
Nath
cR0w 
🏴☠️
Selena the Retro-Princess