Jason CoonAlmost finished!
@ItsMrJP
- 142 Followers
- 106 Following
- 73 Posts
@wizard brilliant work! Here it is running on my wall of Fibonacci & #PixelBlaze, including the "FiboFlower" by @maketvee & Hilbert Curve matrix by @ItsMrJP 🤩
Woot!
I've added a Fibonacci256 HDR to the wall of #PixelBlaze and finally got the Rainbow Waves (Pride) pattern refactored to work on any 2D map! Before it relied on build-specific map arrays. Next up: Color Palette Waves.
Source code: https://gist.github.com/jasoncoon/bbf741be51cd8fd0153c8a0406ac9ad9
@wizard @maketvee @ItsMrJP @wizard
Source code: https://gist.github.com/jasoncoon/bbf741be51cd8fd0153c8a0406ac9ad9
@wizard @maketvee @ItsMrJP @wizard
Progress!
Behold, my synchronized #PixelBlaze powered wall! 🤩
From left to right: 32cm Fibonacci512, 50cm Fibonacci1024, 39cm Fibonacci Flower by @maketvee, 31cm Hilbert curve panel by @ItsMrJP.
PixelBlaze by @wizard is doing all of the synchronization work here. Each piece has its own PixelBlaze and pixel map. The F1024 is set as the leader, the rest as followers, all configured in the web app settings.
From left to right: 32cm Fibonacci512, 50cm Fibonacci1024, 39cm Fibonacci Flower by @maketvee, 31cm Hilbert curve panel by @ItsMrJP.
PixelBlaze by @wizard is doing all of the synchronization work here. Each piece has its own PixelBlaze and pixel map. The F1024 is set as the leader, the rest as followers, all configured in the web app settings.
The diffusion on the Hilbert curve panel by @ItsMrJP is gorgeous! Behind each of the nine 3D printed sections is a Fresnel lens and an 8x8 LED matrix.
GeekMomProjects@Jorvon_Moss @ItsMrJP came over too along with his girlfriend Cindy. Here are Jayy, JP and me just before Jayy poured the chemicals. It took a lot of prep, but we made a good team.
@Jorvon_Moss @ItsMrJP here's the electroplating setup. We suspended the objects to be plated from small stepper motors to rotate them in the solution (second one in video is rotating too, just slowly). In the end it was only a partial success. We made some mistakes - not realizing that our 3d printed objects were going to try their hardest to float, and using copper wire for suspension while also trying to plate the objects in copper so the wires dissolved, but we will try again!