Gammitin (Ben) πŸ’ΎMay 22
I've started looking at this Jetway J-603TCFL motherboard sent by @uhf_satcom πŸ™
It's a Tualatin board & I have a penchant Jetway, it doesn't have AGP and I'm fine with that, running a PCI Geforce FX5500 will be great anyway, tried and tested before
It'll need some work though☺️
Show threadGammitin (Ben) πŸ’ΎMay 22
Show threadGammitin (Ben) πŸ’ΎMay 22
Washy Washy time πŸͺ₯🫧
Show threadGammitin (Ben) πŸ’ΎMay 22
πŸͺ₯🫧
Show threadGammitin (Ben) πŸ’ΎMay 22
I'll leave this to fully dry out in the sun, then tackle the recap.
Show threadGammitin (Ben) πŸ’ΎMay 23
It's been very hot here and the board is now bone dry, so I decided to start the recapping job. I don't have a desoldering station, so I did it the old fashioned way.
Show threadGammitin (Ben) πŸ’ΎMay 23
This capacitor is supposed to be 1500uF, not only is now showing as 482.8uF, look at the Vloss 😬
Show threadGammitin (Ben) πŸ’ΎMay 23
Ok, I'm done.
Caveat: I do not know if the board even works (outside the capacitor issues), but as it's a Tualatin board I want to at least try to bring it back to life. 🀞
Show threadVito Sartori (γƒ΄γ‚£γƒˆ) 🦊
@Gammitin Outstanding job!! 🌟
May 23 at 6:11pmWeb
Show threadGammitin (Ben) πŸ’ΎMay 23
@vito thanks Vito! πŸ™