RevK 

Ok #eufymake help!

My glass has a way forward, flame and etching and extra UV stuff to try next - the print is nice but just not "stuck" well enough. I tried 0.2mm raised and that was much more stuck, but could still peel off.

So next (unrelated) thing to try is the stickers, using the DTF film and laminator.

I am stuck

What material do I select for print?

Material selection guide does not mention film, sticker, or DTF.

DTF guide explains all except what material to select!

[Maybe solved]

Apr 11 at 10:24amWeb
Show threadRevK 3d ago

Given that, for DTF/stickers, you have a sheet of DTF A film on the flat bed, it seems *obvious* to me that this should be a material selection.

It is *NOT*!

It seems you add artwork and select the artwork and tell it the "ink mode" for the artwork is "Sticker" - at which point it moans if not all artwork is set to this.

Test printing now. We will see. I may video this one.

Show threadThe Psychotic Network Ferret3d ago

@revk I need a sticker that says DTF!

/me ducks

Show thread@pndc3d ago
@revk I'd be tempted to try it on some sanded glass to see if it sticks better.
Show threadRevK 3d ago
@pndc Clearly they need an "ink" cartridge with a bit off hydrofluoric acid in it - imagine the safely issues with that 🙂