potateCircles less circle-y
NatanoxHoly shit, that looks like a perfectly miscalibrated resonance compensation (Input Shaping). Can you recalibrate that?
Alternatively perhaps the belts are too tight or too loose.
I checked belts, they’re good.
I’m wondering if there is enough of a weight difference between the old and new extruder to have fouled the configuration.
Yup, changing out your extruder, even if to an identical one, changes the weight just enough to cause this. Input Shaping is indeed what you want to look for, it’ll be different depending on the printer. Some you have to adjust config files, some you can actually do in the slicer now.
I’d give OrcaSlicer a shot, it has some built-in tuning mechanisms
dual_sport_dork 🐧🗡️Do you have something stuck to one of the gear wheels or pulleys in your belt path?
Hmm. Well, then I have no choice but to concur with the others that this appears to be some manner of resonance issue. So much for being hipster about it.
Do you have the machine on a wobbly table? Are any of the armatures loose and able to move? The print head assembly is solid on its linear rails and doesn’t wobble if you grab it and move it around?
Remy RoseYou said it was a slicer issue, but I posit it was a sliver settings issue. If you like EufyMake just try going back to all default, or try and set everything carefully and manually.
Also try OrcaSlicer if it is compatible with your over the air printing capabilities, great slicer and user experience.