Andy Warburton ❌❌❌Currently printing a big model… 0.15mm layer height, 0.4mm nozzle because I want it to look really nice. Lots of perimeters because it needs to be acoustically dense. 22 hours… I can’t remember the last time I ran a print for this long! Normally I print with a 0.6mm nozzle so this feels even slower. When it’s finished I have to print the other half too!
Michael Horne@andy_warb What is it? What is it!? 🙂
@recantha speaker enclosure for the Satellite One by Future Proof Homes (an open source Alexa alternative)
Kernel Bob 
@andy_warb Are you going to be able to test fit the components with the first half?
(I'm assuming this is your speaker enclosure.)
@kbob unfortunately this is the back half which doesn’t contain anything useful. I hadn’t updated the design for the front half to accept my speaker and wanted to get something going due to the long print times. Luckily I have a second printer that I’m running some test prints on (and I’ll do an enclosure free test this evening when the kids are in bed)