A local city proudly mentioned on the news that they had a system that could track TPMS sensors. Pretty much all cars after 2008 uses TPMS sensors that each broadcast a unique identifier to the car. They aren’t hard to remove, and you can buy valve stems that fit your car (0.452 hole) at any auto parts store.

By “aren’t hard to remove” you actually mean requires dismounting the tire from the rim, remounting it, and then balacing it. This is far beyond the capabilities not to mention equipment of the typical layperson. Plus, your state is likely to conveniently fail your car on its next inspection for a nonfunctioning TPMS system, same as your check engine light.

If you’re going to go the distance anyway, get your tire shop to mount aftermarket Autel sensors in your rims. Using the readily available diagnostic tool, you can occasionally reprogram those (wirelessly!) with a set of random IDs and then also program your car to use them. You’ll be a lot tougher to track if your signature is different every week.

I’m not about to do this just yet, but I do have the tool for more mundane purposes and I only paid around $200 for it several years ago.

It certainly doesn’t require removing the tire from the rim. I removed each wheel, broke the bead on the side that has the valve stem, pried the tire back away from the rim, remove the sensor (mine had a convenient little part you can push to release them) then air the tire back up and put the wheel back on the car. Didn’t even have to re-balance them.

If we want to take steps to protect ourselves from such tracking, we cannot afford to simply say “It’s ToO hArD!!!1!” with a multi-paragraph reply that took more time to type out than it took for me to remove one sensor. Can’t do it? Learn how. Defeatist replies belong on Reddit with all the other propaganda.