Sure! But it would be nice if you could help me with a few things:
yosys can read (e.g. Verilog or SystemVerilog)?And it seems like I also need to figure out how to install Veryl in the first place:
╭─jcm💞cyndi@layla in ~ at 15:28:19
╰─λ cargo install verylup
...
╭─jcm💞cyndi@layla in ~ at 15:45:26 took 13m56s
╰─λ verylup setup
Error: unknown target :riscv64gc-unknown-linux-gnu
Milk-V Mars is a high-performance RISC-V Single Board Computer (SBC) the size of a credit card, built on the StarFive JH7110. This four-core device supports a plug-and-play eMMC module, as well as up to 8GB of LPDDR4 memory. The board is equipped with three USB 3.0 ports, one USB 2.0 port, an HDMI 2.0 port that supports 4K resolution, an RJ45 Ethernet port that supports PoE (Power over Ethernet), and an M.2 E-Key slot for a WIFI/BT module. It also includes a 4-lane MIPI CSI and a 2-lane MIPI CSI, along with a 40-pin GPIO
@jcm if you're looking for something to verify that your toolchain is working, they offer a hello world example
https://doc.veryl-lang.org/book/03_getting_started/02_hello_world.html