The Chaotic Good🏳️⚧️🏳️🌈
Nixie@aminorjourney Haven't we all?
What makera are you using? I'm thinking on getting the Z1 for small things I usually do.
@Nixie Apparently!
I have the Air. I was one of the earliest kickstarters.
I was trying to face something I’d made on the 4th axis, with a rough z height profile.
I homed the unit to centre point. I told it where I wanted the z home to be.
EIther it did not listen or I got it wrong. It was off by the same mm as the start depth from z 0
Unfortunately, most of today's projects have been questionable:
1) Try to get my #FCSP working again by opening it up and doing a UART connection - successful, but no further along in fixing it.
2) Making a VESA mount for the rack that goes in my server room - that was at least successful...
3) Trying to face off my pieces in the Carvera Air. Meh...
WooShell@aminorjourney @Nixie That advice probably comes a bit late, but it's always a good idea to do a test run without the material to see whether coordinates etc are right.
I've had more than enough mill bit shrapnel fly through the workshop during my apprenticeship because people misplaced a decimal point in gcode or similar easy mistakes.. ;-)
I've had more than enough mill bit shrapnel fly through the workshop during my apprenticeship because people misplaced a decimal point in gcode or similar easy mistakes.. ;-)