Ich brauche nochmal #Brainpower der #EDV #Bubble 🤣

Da mein bisheriges, betagtes, leistungsschwaches 1-Bay
#QNAP #NAS sehr langsam ist, z.B. beim #rsync, habe ich inzwischen das #Ugreen #NAS #DPX2800 gekauft, mit 32 GB #RAM aufgerüstet und 2 #NVNE mit je 2 TB eingebaut.

Azf den beiden M.2 ist
#Proxmox im #ZFS #RAID1 installiert. #Homeassistant und #TrueNAS laufen je in einer #VM.

TrueNAS soll nun einen
#Datenpool in Form eines verschlüsselten ZFS RAID 1 auf 2 16 TB Festplatten bekommen. So weit so gut.

Nur: Wie bekomme ich die
#Daten vom alten NAS, die in einer verschlüsselten #LUKS #Partition liegen, in den Datenpool?

Über
#Netzwerk kopieren ist keine wirkliche Option. Das ist für ~ 10 TB Nutzdaten viel zu langsam.

Bitte
#Boost für mehr Reichweite. 🙏

@crazy2bike Copying the data over the network is slow, but it’s also probably the only option. I suppose you could try using a USB SATA adapter. Proxmox is Linux-based, so it should be able to understand LUKS and whatever filesystem is on the old drive (ext4?).

A single spinning disk doesn’t go a whole lot faster than 1g network, though, so it’s probably not worth the hassle. Just set up your new mirror and rsync over the 1g network.

@bob_zim

Decrypting the disc with Proxmox is no problem. But I need to decrypt the disc inside the TrueNAS vm.

The speed over 1 gbit/s network is 12,5 MB/s maximum. A single sata disc is reading and writing at least about 8 to 10 times faster.

@crazy2bike

> Decrypting the disc with Proxmox is no problem. But I need to decrypt the disc inside the TrueNAS vm.

Warum? Du kannst doch die luks auf dem proxmox-host aufmachen: dann hast du ein /dev/mapper/foo in der Hand, dass du in die TrueNAS VM als device reinreichen kannst.

@jeichhor

Stimmt. Das geht ja auch. Manchmal sehe ich den Wald vor lauter Bäumen nicht
🤣🤦