gallaugherNow with eight 32x8 flexible #NeoPixel #LED mateicies & just one signal clearing 330 ohm resistor controlled by one @raspberrypi Pico 2W w/CircuitPytbon, an @adafruit Vl53l1x Time of Flight sensor, & PVM5102 DAC w/speaker out. Will tweak sound & animation & add at least two more pillars w/new tone ranges. Ideas for diffusion? I’ll wait til I get the final fab done but will absolutely post a build tutorial. https://youtube.com/shorts/iTfHW93_Xi8?si=QpLEsxCYV2CUkJpK
@raspberrypi @adafruit glad you like it. I'm actually powering the Pico from a standard 5v mobile phone style power supply. The LED matrices all have a power/ground in the center, so I've soldered on wire extensions, run these to a 12 x 2 terminal block, linked the Pico's ground to the ground on that terminal block, and run the power / ground via terminal/barrel jack to a 5v 10amp power supply. Will definitely share the build video on YouTube.com/@BuildWithProfG
BlinkUp@gallaugher @raspberrypi @adafruit This looks awesome! Looking forward to a write up. Can you tell me what you are using to power the LED Matrices, I am assuming that each one needs 5V. Thanks.