MobilinkdHas anyone pushed 100W HF through an SMA connector? I see they are rated at 600W below 1GHz. LMR195 is rated to 800W at 50MHz. Looking at a short run of LMR195 to get through the exterior wall into an SMA keystone outlet in the shack. Maybe 3m/10ft max run between the radio and the LMR400 feedline. Losses in adapters and cables are acceptable. Grounding is handled. Anything else I should be concerned with? #hamradio
Chuck@Mobilinkd From an EE perspective the issue would be heating. Could be pretty easy to prototype and to put a FLIR or non-contact thermometer to look at the transmission line temps.
My guess is that it will not be an issue.