Roughly 5 Percent Of All Cybertrucks Are For Sale Online Right Now
Roughly 5 Percent Of All Cybertrucks Are For Sale Online Right Now
Very. It's a lot more complicated than just a battery, it's a complex management system that, despite the reputation of Tesla for manufacturing details and their CEO for...well, himself, is very impressive. You'd need to keep or reinvent most of that to avoid cell failures (and fire).
If you're really serious about a small DIY EV, look into the kits that are available to modify existing ICEs into EVs. Not quite the power level, but they do work pretty well if you don't mind the complexity of the work in strip down and rebuild. And often times they do use used/refurbished Tesla batteries in their makeup.
Probably size. Often times that seems to be the problem, where to put the battery since Teslas are built with it already part of the chassis. OP's question stemmed from just tearing down to the battery and frame, and there's a lot more to it than that. The question would be, what is the minimum needed of a Tesla to work?
Also, I don't know much of a Tesla battery is internally managed vs. outside, but I think the interface is a lot more than just a red and black wire.
Why not just keep all that hardware? At the end of the day, it all communicates over a CAN bus or equivalent, and there are a bunch of DIY projects to effectively communicate with the various ECUs. Thank god Tesla is yet to go the way of Apple in locking down hardware against “unauthorized” modifications. I think worst case is they cut you out of supercharging.
I think the more challenging bit would be separating the battery from the vehicle. If it’s built anything like the “structural pack” in the Y, the only way to remove it is with a hacksaw.
I’m very excited about Edison Electric’s work truck conversion kits. You keep the body of the truck and put a small diesel generator, a battery pack, and an axle with electric motors. So you can convert existing vehicles to be very efficient, and they claim 8,000 lb ft of torque. So instead of buying a brand new hybrid tow truck or whatever, you do a swap for half the cost and get all the benefits.
And this is okay for /fuckcars because we all agree we’ll still need work and delivery trucks.
A lot of tech is terrible because the designers aren’t the users. You can be sure that if every engineer and manager at Tesla was forced to drive them daily, they’d have a lot more safety factor built in. Simple things like doors that worked in the event of a power failure or built in fire suppression to give the occupants more time.
The fact that Edison is being built by people from a logging company that operates away from parts warehouses means it will be designed with “In The Field” fixability in mind and wont have anything tied down to an internet connection.
The Rivian R1 exists, as well as a Hummer EV truck.
Of the three if I had to get one, probably the Rivian right now. But they're all ridiculously oversized and I'd rather get something good for what I do, which is mostly city driving.
Very little.
Even people in Bellevue and Kirkland, WA only started getting theirs delivered about 3 months ago, and about 90% I have seen since have been within the last week and a half to two weeks.
I have only seen about 40 so far, and 15 of them are possibly the same person just in different parts of town.
the Idiot that green lit this lemon of a product.
His name starts with “E” and ends with “lon Musk.”
People like money
They’re trying to flip them