cynicalsecurity 
[This article is somewhat outside the range of what I normally look at but my father taught me about Josephson Junctions back in the 1980s and they sort of "stuck", besides superconducting electronics has been a holy grail in forever. See this a bit in the light of the recent fusion announcement and file under "cool science".]
J. Volk et al., "Low-Cost Superconducting Fan-Out with Repurposed Josephson Junctions"¹
Superconductor electronics (SCE) promise computer systems with orders of magnitude higher speeds and lower energy consumption than their complementary metal-oxide semiconductor (CMOS) counterpart. At the same time, the scalability and resource utilization of superconducting systems are major concerns. Some of these concerns come from device-level challenges and the gap between SCE and CMOS technology nodes, and others come from the way Josephson Junctions (JJs) are used. Towards this end, we notice that a considerable fraction of hardware resources are not involved in logic operations, but rather are used for fan-out and buffering purposes. In this paper, we ask if there is a way to reduce these overheads; propose the repurposing of JJs at the cell boundaries for fan-out; and establish a set of rules to discretize critical currents in a way that is conducive to this reassignment. Finally, we demonstrate the accomplished gains through detailed analog simulations and modeling analyses. Our experiments indicate that the introduced method leads to a 48% savings in the JJ count in a tree with a fan-out of 1024, as well as an average of 43% of the JJ count for signal splitting and 32% for clock fan-out in ISCAS'85 benchmarks.
Low-Cost Superconducting Fan-Out with Repurposed Josephson Junctions
Superconductor electronics (SCE) promise computer systems with orders of magnitude higher speeds and lower energy consumption than their complementary metal-oxide semiconductor (CMOS) counterpart. At the same time, the scalability and resource utilization of superconducting systems are major concerns. Some of these concerns come from device-level challenges and the gap between SCE and CMOS technology nodes, and others come from the way Josephson Junctions (JJs) are used. Towards this end, we notice that a considerable fraction of hardware resources are not involved in logic operations, but rather are used for fan-out and buffering purposes. In this paper, we ask if there is a way to reduce these overheads; propose the repurposing of JJs at the cell boundaries for fan-out; and establish a set of rules to discretize critical currents in a way that is conducive to this reassignment. Finally, we demonstrate the accomplished gains through detailed analog simulations and modeling analyses. Our experiments indicate that the introduced method leads to a 48% savings in the JJ count in a tree with a fan-out of 1024, as well as an average of 43% of the JJ count for signal splitting and 32% for clock fan-out in ISCAS'85 benchmarks.