James BrownVery happy about this.
Here’s the bare circuit
I guess I’m just going to work my way through then.
Lots of people have asked, so: processor is a STM32F030F4P6 (Cortex M0, 16K flash, 4K ram), screen is a QT1306P82 (0.42" OLED).
I haven't shared the schematic because it contains an error; you need to rework the boards to route a spare gpio to the screen. This involves drilling a 0.3mm hole through one of the pads, making a break in the ground plane, and soldering a little piece of wire through.
Putting together another brick. These battery contacts are the hardest part of the build.
While that one cures, I added the trench run and got capacitive touch working in the studs.
The new one is more opaque and a closer match to Lego Blue. I also painted the edges of the screen with black lacquer, which got rid of the glowing surround. It’s a very fiddly construction. If I’m going to make more, I need to work on tooling.
murad@ancientjames I realise this isn't news to you, but these are just amazing! 😁
derPUPE
marble 弹珠@ancientjames may I ask how you made the contacts on the bottom of the brick? Are they simply wire that presses against the contacts in the side of the studs?
@ancientjames oh is it the side PCBs making contact via exposed pads? https://mastodon.social/@ancientjames/109244761058481795
Philipp@ancientjames Wow, that is really impressive!🤯
AxWax@ancientjames Wow -amazing work! 🤯
Ada Rose Cannon@ancientjames if you ever found away to mass produce these I would buy a half dozen they are amazing!
Christian Waidner@ancientjames Thanks for sharing - this is such a cool project!
Frank Fischer@ancientjames This is so amazing! 🤯
Submit this video to Lego if you are looking for a job : )
Submit this video to Lego if you are looking for a job : )
wb x64@ancientjames this is the kind of stuff that if someone asked me if it was possible I'd tell them no. Awesome work.