LeeNabao Intelligent LED Table Lamp offers 4-in-1 functionality: wireless charging, Bluetooth speaker, night light, and alarm clock. Control via app or voice commands. #smartLED #speaker

http://cutetechgadgets.com/2024/07/06/experience-innovation-leenabao-smart-led-lamp-review/

Finally had time to look at the @HIP22 badge and have some initial #Rust code working as well as one of the 16 #LED s driven by the #WS2812 #NeoPixel #SmartLed 's.

Something I haven't yet seen (but seems to be quite common) is (ab-)using the #SPI to produce the waves for the DIN for the LEDs:

To recap, SPI uses SCLK, PICO/MOSI, POCI/MISO, CS/SS for communication, that is clock, data to and from peripheral and chip-select. The LED stripe only uses one "data in" port however, with a peculiar square-wave protocol that requires precise timing. One popular way to achieve that is to program the SPI to leave SCLK, POCI and CS unconfigured and only hook up PICO<->DIN. Further, since the SPI works at roughly 4x the speed the LED strips operate, to send one bit of value X over to the LED, you need to tell the SPI to send four such X valued bits.

Now I need to figure out whether the Rust crate for this allows "empty" or dangling SPI GPIO Pins as well...
https://docs.rs/crate/ws2812-spi/latest

Some articles around this technique:
https://ioprog.com/2016/04/09/stm32f042-driving-a-ws2812b-using-spi/
https://github.com/benwilliam/equinox_clock/tree/master/WS2812b_SPI

There are some people basically doing the same in hardware:
https://sites.google.com/site/wayneholder/besting-ben-heck
https://www.elektormagazine.com/news/spi-to-ws2812b-converter-more-leds-more-power
https://www.youtube.com/watch?v=aCK0SpZ2ueg

SMART HOME - SMART LED WIFI UNBOXING | REFÚGIO DOS NERDS

#boost #newvideo #videonovo #youtube #alexa #smartled #smarthome #unboxing #testando #tecnologia #technology #future #casainteligente #casaconectada
https://www.youtube.com/watch?v=Ro5NTUa9WwI