🙋♂️👀 Are you a film maker with material or dancer/performer looking for collaboration?
Studies of Dance and Flow: Looking back at this fun project. A study of translating dance, body and movement into graphical output. Mapping the gracefulness of dance into moving compositions of lines, dots and colors.
What if we use body motion to create organic graphic systems?
➔ https://nahuelgerth.de/lab/dance-and-flow
#creativecoding #bodytracking #motiondesign #dance #embodiedinteraction
It is finished! That took so much longer then anticipated, probably because i got distracted with other projects but this commission is finally complete 
(part 7 of my slimevr project)
#slimevr #esp32 #bodytracking #vr #vrchat #diy #electronics
First fully assembled tracker! The slime software seems to be reading the tracker correctly 🥰
(part 6 of my slimevr project)
#slimevr #esp32 #bodytracking #vr #vrchat #diy #electronics
All 10 of the IMUs are now assembled. I'm happy i was able to consistently make them by hand. It's not ready on this tiny scale.
(part 5 of my slimevr project)
#slimevr #esp32 #bodytracking #vr #vrchat #diy #electronics
Well, i might have been overly optimistic about making the bmi270 modules myself. I should have checked the size before buying all 10 of them 😭 even under 30x optical zoom, it's very difficult to trace the pads and my printer can't even print that well elements this tiny (yes this is a regular needle on that pic, the pads are 0.25mm x 0.475mm in size). I think i will have to order PCBs or just ready modules 😔
(part 2 of my slimevr project)
justada
(@)adaofgreengables(@)eldritch.cafe :
I assembled a bunch of those modules and ran a quick test. Looks like the chips work so i suppose i can start flashing the actual slime vr firmware onto it
(part 4 of my slimevr project)
Attached: 2 images I assembled a bunch of those modules and ran a quick test. Looks like the chips work so i suppose i can start flashing the actual slime vr firmware onto it (part 4 of my slimevr project) #slimevr #esp32 #bodytracking #vr #vrchat #diy #electronics
I assembled a bunch of those modules and ran a quick test. Looks like the chips work so i suppose i can start flashing the actual slime vr firmware onto it
(part 4 of my slimevr project)
#slimevr #esp32 #bodytracking #vr #vrchat #diy #electronics
Finally came back to the slime vr project. I have all the components so here is a timelapse of me assembling the pcb of the bmi270 module. Don't worry i corrected all the pieces after the recording
(part 3 of my slimevr project)
Well, i might have been overly optimistic about making the bmi270 modules myself. I should have checked the size before buying all 10 of them 😭 even under 30x optical zoom, it's very difficult to trace the pads and my printer can't even print that well elements this tiny (yes this is a regular needle on that pic, the pads are 0.25mm x 0.475mm in size). I think i will have to order PCBs or just ready modules 😔
(part 2 of my slimevr project)
Gonna start a new project soon. My partner tasked me with crafting a full body tracking suit for her vr headset. I will be making the slimevr with 10 BMI270 sensors. I find it incredibly neat that there is an opensource solution for this 
Link to slimevr documentation: https://docs.slimevr.dev/diy/tracker-schematics.html
Sensor chip datasheet: https://www.alldatasheet.com/datasheet-pdf/pdf/1137432/BOSCH/BMI270.html
(part 1 of my slimevr project)
Nahuel Gerth
✨ justada 
Francis Mangion (M) (VR/AR/*)