Mastodawn

Digital audio myth debunked here with evidence in physics mathematics and chemistry. The chemical makeup of the vinyl record has influence on the physics and the mathematics of what your stylus and cardridge (moving magnet / moving coil) will pickup.

Be amazed at the fact that the signal remains smooth when going through AD DA conversion all the way up to the Nyquist frequency

Watch, listen and learn

https://www.youtube.com/watch?v=cD7YFUYLpDc

#Digital #physics #mathematics #Lineair #Algebra #chemistry #Analog #Signal #Audio #Vinyl #PA #Studio #Sound #Noise #Ratio #effects #faders #Yamaha #Behringer #Mackie #Focusrite #Nyquist

Dendrobatus Azureus 23h ago

Analog and digital have gotten married since the 1980's when we analyze the Vinyl Signal path.

My current signal path
* Vinyl Direct Drive Turntable to mix.
* Audio Interface3 to mix.
* Always on HW Music player to mix.
* Instrument Mixer
* Yamaha Mixing Console
* AUX0 send FX Rack
* AUX1 send FX Rack
* AUX0 Return Master Bus
* AUX1 Return Master Bus
* Mixing Console to Headphone AMP0
* Mixing Console to Headphone AMP1
* Mixing Console to Digitizer send
* DAW receive

You can clearly see a mix of digital and analog equipment in my Studio hardware setup, which IS mostly analog on purpose

Vinyl has crucial digital equipment in its signal path of production. Without it your records would sound terrible. SO get over it, you need digital even as an Analog purist

#Audio #Vinyl #PA #Studio #Sound #Digital #Analog #Signal #Noise #Ratio #effects #faders #Yamaha #Behringer #Mackie #Focusrite

https://www.youtube.com/watch?v=Xb32bj0XmW8

Show thread

Nielso 1d ago

So, all I wanted to do was a quick check, and once ffado-mixer is up and running i can do this on #Linux with the old #RME #Fireface400…

Turns out this #Focusrite Platinum #OctoPre here has some minor issues. (Hooked up to the RME via ADAT Lightpipe + WordClock)

I wanted to sell that one, I don't need it, but it get's a little hot… or is that normal? The power supply is not original.

Anyways, the analog gain meter is stuck.

Sciasm 1d ago

Is anyone into music production with analog synths and has advice for my man? He could use some help troubleshooting an interface issue.

➡️ https://metalhead.club/@dereisenhofer/116002442564498624

#MusicProduction #ElectronicMusic #AnalogSynth #AskFedi #LinuxAudio #ReaperDAW #Focusrite #Behringer

dereisenhofer (@dereisenhofer@metalhead.club)

#AudioEngineer I have the weirdest situation. I use an UMC1820 with a Focusrite Octopre MKII Dynamic. Both worked together under Linux, until they didn't: The Locked light wasn't shining anymore and no signal came from the pre. I connected the interface to a Win PC, also, no Locked LED and no sound from the pre. But: When I set the Focusrite to Internal clock and the UMC to OpticalIn so that the pre gives the clock to the UMC, then the devices are locked and I get sound from the pre to my DAW. Is the UMC broken? What am I doing wrong? #HomeStudio #BedroomProducer #Homerecording #ReaperDAW #Recording #Focusrite #Behringer

Metalhead.club

dereisenhofer 1d ago

#AudioEngineer I have the weirdest situation. I use an UMC1820 with a Focusrite Octopre MKII Dynamic.
Both worked together under Linux, until they didn't: The Locked light wasn't shining anymore and no signal came from the pre.
I connected the interface to a Win PC, also, no Locked LED and no sound from the pre.
But: When I set the Focusrite to Internal clock and the UMC to OpticalIn so that the pre gives the clock to the UMC, then the devices are locked and I get sound from the pre to my DAW.
#HomeStudio #BedroomProducer #Homerecording #ReaperDAW #Recording #Focusrite #Behringer

André Menrath Jan 24

So I finally got some new hardware for my homestudio.

I switched to a #Focusrite Clarett+ 8Pre USB audio interface. So far things are running really smooth. The "ALSA Scarlett Control Panel" (https://github.com/geoffreybennett/alsa-scarlett-gui) is an amazing piece of software. It allows me to control the internal mixer, and all other features, I otherwise wouldn't have any access to. (1/3)

#LinuxAudio

lo-fi beats Jan 15

lo-fi electroacoustic tunes to spite and outline to

https://youtube.com/watch?v=XoKDbC1Z-ho — Why EVERYONE has A Scarlett 2i2 #music #recording #focusrite (1:19)

Why EVERYONE has A Scarlett 2i2 #music #recording #focusrite

YouTube

7sleepersmusic Jan 4

#CurrentlyWishing that I was more cautious with the #MacOS updates. #Sequoia has rendered my #Focusrite 18i6 audio interface effectively useless. I never set up #TimeMachine, so "rolling back" isn't practical. Caveat emptor :-( #Apple #Tech #MacBook #MusicProduction https://support.focusrite.com/hc/en-gb/articles/12033372452754-Focusrite-Compatibility-on-macOS

Focusrite Compatibility on macOS

Compatibility information for Focusrite Pro products (e.g. RedNet and Red) on macOS can be found on the Focusrite Pro Help Centre. This article describes compatibility for Focusrite products on mac...

Focusrite

Michael9 Dec 22

Massive round of improvements to SessionMixer!

High level cue mixes now working. Supports multiple cue mixes. New topology and session frameworks internally. Routing manipulation via buttons (see "mute" button).

See the attached screenshot and config. That simple config turns into a tidy little cue mix!

#linux #audio #linuxaudio #focusrite #studio #musician #musicproduction #foss #golang