McDonnell Douglas DC-10-30 1:500 - FDM
The McDonnell Douglas DC-10-30 is a classic long-range trijet, recognizable by its two wing-mounted engines and a distinctive third engine integrated into the vertical stabilizer. This wide-body workhorse uses a robust landing gear setup and features an extended fuel capacity compared to its domestic siblings, making it ideal for intercontinental routes.
This model is printed using an FDM printer, I hope you like it, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
B737-800W 1:500 - SLA 2
The Boeing 737-800W is characterized by its blended winglets, optimized for reduced drag and improved fuel efficiency across medium-haul operations. Its elongated fuselage, advanced aerodynamic surfaces, and refined control geometry contribute to stable handling and consistent performance.
B737-800W 1/500 - SLA, 2025-06-25, the front landing gear of this model has been thickened, but I still uploaded the fuselage with the previous landing gear. And the fuselage that is not in the center does not need to be fixed, but I uploaded the two wings that have been exported without moving their positions.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
ATR 72-600 1:400 – SLA 1
The ATR 72-600 is a modern regional turboprop, distinguishable by its six-bladed propellers and optimized performance for short-haul routes.1 Its flight deck features an advanced avionics suite, including the innovative $ARINC~429$-based Thales $AHRU$ (Attitude and Heading Reference Unit), enhancing crew efficiency and situational awareness.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Northrop YF-23 Black Widow II 1:72 - FDM
The Northrop YF-23 Black Widow II prototype was a striking fifth-generation fighter concept engineered for exceptional stealth and supercruise capabilities. Its distinctive features included a blended wing-body configuration, fixed low-observable exhaust troughs, and unique canted V-tails to minimize radar cross-section while enabling sustained supersonic flight without afterburners.
Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did.
The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
McDonnell Douglas DC-10-30 1:500 - FDM
The McDonnell Douglas DC-10-30 is a classic long-range trijet, recognizable by its two wing-mounted engines and a distinctive third engine integrated into the vertical stabilizer. This wide-body workhorse uses a robust landing gear setup and features an extended fuel capacity compared to its domestic siblings, making it ideal for intercontinental routes.
This model is printed using an FDM printer, I hope you like it, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Mil Mi-26 1:500 - SLA 2
The Mil Mi-26 is an absolute beast of a helicopter, famous for being one of the largest and most powerful production choppers in the world. Its massive size allows it to lift incredibly heavy payloads, making it an essential workhorse for transporting huge equipment or assisting in major disaster relief efforts.
This helicopter consists of three parts, fuselage, main rotor and tail rotor. The difficulty is that the holes are always covered with resin after printing, so you need a small drill to make the holes so that the two rotors can be attached, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Gulfstream G550 1:400 - SLA 1
The Gulfstream G550 is a luxurious long-range business jet, known for its elegant design and cutting-edge technology. With a sleek, streamlined body and spacious interior, it combines comfort and performance for both private and corporate travel. Equipped with advanced avionics and a powerful engine, the G550 can cover vast distances, ensuring efficiency and reliability at high altitudes.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Embraer ERJ145 1:500 SLA
This model is made for SLA printers and has never been printed before.
AW139 - Long Nose 1:500 - SLA 2
The AW139 is a twin-engine helicopter known for its strong performance, smooth handling, and reliable safety systems. Its sleek fuselage, wide cabin, and distinctive five-blade main rotor give it a modern and capable look. Powerful engines and excellent lift capacity make it suitable for everything from rescue work to executive transport.
This updated AW139 Long Nose (v2) SLA model, scaled at 1:500, features several refined details including the removal of the left tail fin and an under-fuselage antenna, along with the addition of a tail rotor shaft and a dedicated attachment hole.
These are the links:
Previous version: https://cults3d.com/en/3d-model/game/aw139-1-500-long-nose-sla
Video showing how this helicopter was printed: https://youtu.be/RzFVsYlIOCo
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Heri_3d