Welcome to the club.

I’m a big fan of the BLE caberqu, it does a bit more than the treedix tester and has an app to save and export cable reports.

EDIT: here’s the link caberqu.com/…/39-ble-caberqu-0611816327412.html

Your solution may very well also work, good thinking. A few things to consider though:

• Putting capacitors in series requires balancing them
• A silicon full bridge rectifier drops ~1.4V frm the input
• Incandecent bulbs require a lot of current to get going, this may result in a delay for them to turn on

Haha pretty much

Interesting approach, never thought about using the cable for something completely unrelated.

Thanks, that’s pretty much exactly what I found: en.wikipedia.org/wiki/USB_hardware#Allowable_curr…

I’ve actually done that with a simple single diode rectifier and a supercap with zener voltage limitation:

If your supercap has a too low series resistance for the LED to light immediately you need an additional resistor in series with it. It is simple and small enough to directly fit inside the original lamp casing and has been working without a problem for over 3 years.

The USB-C standard and particularly the USB PD (power delivery) is so complex it almost feels comical.

The PD standard document (freely available on usb.org) is over 800 pages long and features a lengthy part about the role of the cable alone which is mostly hidden from the user. Here’s a short video about this issue: www.youtube.com/watch?v=6bZ0y9G-4Pc