| Our main web | http://www.precitools-it.com |
| Our PBT web | https://www.press-brake-tools.com |
| Our blog | https://blog.precitools-it.com |
| Tube bending tools web | https://www.bendtools.eu |
Precitools
- 1 Followers
- 0 Following
- 23 Posts
Precitools - industrial solutions B2B from italy for deformation tube and sheetmetal
Mandrel tube bending is a technology we know very well, and tube bending tools are one of our core products.
With tube bending tools, it is quite complicated because we have a lot of requests, but we cannot cover them all because of the lack of drawings. All tube bending machines are different, connection dimensions are different, and there is no unification.
Another story about mandrels: we can supply mandrels to any machine. You can come with your sizes or requirements, or just provide us with the necessary information: parameters of the tube to be bent, length of mandrel, and thread for connection. This will be enough for our recommendations. We can provide any type of mandrel, from solid plugs to very complicated multi-ball constructions and solutions for rectangle and square tubes and special profiles.
Here is more information:
https://www.bendtools.eu/mandrel-bending-technology.htm
#tubebending #pipebending #mandrels #mandrelbending #tubebendingmachine
For the Promecam tooling system, we offer 4V and 3U bending dies. These dies are the most universal product for starter sets for press brakes and have the economic possibility of working with different thicknesses. These dies could just be turned around to get other V-openings. It is also very effective for the customer who just starts to work with the press brake and has the necessity to prepare their actual parameters for die opening and tonnage to be used.
We also have a polyurethane insert for the V50 opening, so you can work to bend in polyurethane as well. And together with our 3U die, you can have the complete range of main used openings from 6 mm.
In other systems, these dies could be used with adapters. Contact us if you need any additional information.
https://blog.precitools-it.com/4v-bending-die-the-best-product-for-promecam-press-brakes/
#pressbraketools #bendingtooling #pressbrake #pressbraketooling #bendingtools
We came today with a new, interesting text topic.
Even for the Promecam system, we are offering solutions to bend big thicknesses and special materials with tonnages bigger than 100 t/m. And if you need to perform this job, you also need to change the Promecam standard holders to HD clamps, and we can also supply them. We know how to calculate and study your requirements, to tell you the necessities of flange size and possible radius, and to warn you about the risks. Bending the thick material on the press brake is a very dedicated and special task, and you should be absolutely sure that you can do it and that it will not damage anything, including the parts and the beam of your press brake.
Out of standard systems, we offer the special individual production of high-tonnage, heavy-duty reinforced tools for your needs to install big-tonnage press brakes.
So contact us for the details, or you can follow our article about it as well!
https://blog.precitools-it.com/high-tonnage-and-big-thickness-bending-with-your-press-brake/
Together with press brake tools, we are also able to supply panel bending tools for automatic panel bending centers and automatic folding machines and centers: Accurl, Amada, CIDAN, Durma, Erbend, LVD, Prima Power / Finn Power, Salvagnini, Schroder, Tecnoma, Trumpf, etc. Mainly these machine tools are used to make small height boxes and panels, very widely used in cooling industries and the production of refrigerators.
If you will be able to provide the drawings and all necessary sizes we are able to offer the bending tools according to your specifications and lengths including the lateral horns with optimal precision and necessary grinding. We are absolutely sure that the price difference could be also the key to look for external supplier as well. We are open for your projects and inquiries.
#panelbending #foldingmachine #panelbendingtools #bendingtools
If you will be able to provide the drawings and all necessary sizes we are able to offer the bending tools according to your specifications and lengths including the lateral horns with optimal precision and necessary grinding. We are absolutely sure that the price difference could be also the key to look for external supplier as well. We are open for your projects and inquiries.
#panelbending #foldingmachine #panelbendingtools #bendingtools
Bending of radius shapes is a tricky thing. If it is a U-shape (or U-channel) (this means the sides should be 180 degrees) it will be a double tricky thing and it is impossible to achieve with the standard tools. The solution for bending should be to close the part more than 180 degrees to have the coefficient of return when the part is extracted. We are talking about it also in our blog. The hard story is that the radius bend makes the big spring back and it is not just a couple of angles. We study different ways of bending from offering standard tools to bumping tools with completely special complicated solutions.
Sure that each task is unique and conditions are different. For real big radiuses the U-shape bend could be achieved during 3 or 4 radius bends but if the distance of the lateral sides is small it will just make a collision with the tooling of the machine beam. Or probably it is possible to bend all in coining but it requires much more force. Anyway, we are open to your requests for radius bending so let us know if you study the tools for it.
#pressbraketooling #bendingtooling #pressbraketools #pressbrake #radiusbending
Sure that each task is unique and conditions are different. For real big radiuses the U-shape bend could be achieved during 3 or 4 radius bends but if the distance of the lateral sides is small it will just make a collision with the tooling of the machine beam. Or probably it is possible to bend all in coining but it requires much more force. Anyway, we are open to your requests for radius bending so let us know if you study the tools for it.
#pressbraketooling #bendingtooling #pressbraketools #pressbrake #radiusbending
Today we will speak about punching units - small devices with big possibilities.
Mainly punching unit could be attached to any equipment with produced force - any press, hydraulic station, etc. But because we speak a lot of bending tools, for sure we will speak about the press brake.
Installation of a punching unit to the press brake could make a universal tool to punch the holes where necessary and then to make bending. Or to punch the holes, to form the holes, and then to make bending. If there is no punching press on production, with a punching unit installed on the press brake the factory now can do countersinks, embosses, dimples, lance and form shapes and any other forming necessary. And with the clever distribution of stations, it could be the ideal solution to punch and bend just between a few meters.
Punching units are available with their tooling but we also can supply punching units to use with a standard Thick Turret system with A, B, C, and D stations. In this way, tools are 100% interchangeable with punching press to divide the tasks and you are independent to find the supplier of main tooling to use. If it is possible, using several units at one time could speed also up the production process in time!
#punchingunit #punchingtool #punchtool #pressbrake
Mainly punching unit could be attached to any equipment with produced force - any press, hydraulic station, etc. But because we speak a lot of bending tools, for sure we will speak about the press brake.
Installation of a punching unit to the press brake could make a universal tool to punch the holes where necessary and then to make bending. Or to punch the holes, to form the holes, and then to make bending. If there is no punching press on production, with a punching unit installed on the press brake the factory now can do countersinks, embosses, dimples, lance and form shapes and any other forming necessary. And with the clever distribution of stations, it could be the ideal solution to punch and bend just between a few meters.
Punching units are available with their tooling but we also can supply punching units to use with a standard Thick Turret system with A, B, C, and D stations. In this way, tools are 100% interchangeable with punching press to divide the tasks and you are independent to find the supplier of main tooling to use. If it is possible, using several units at one time could speed also up the production process in time!
#punchingunit #punchingtool #punchtool #pressbrake
To tell the truth, bar and tube bending with the press brake - is quite a rare application that is requested if, for example, the customer needs to have simple bent bars directly at the same place and probably weld after together. With a tube it is more complicated - during the bending the tube wall could be easily deformed, so it is for applications where the ovality of the tube is not so important or necessary to make internal filler - sand for example. Anyway it is possible, used by some companies and the special bending tooling for press brake to bend tubes and bars is presented and we are ready to supply it as well.
Well, as we told you before it is a special case because if you want constant production - it is more easy to purchase a simple tube bending machine. But with bar bending more force is necessary so the method to bend with press brake has its advantages. We publish it to show different possibilities for applications to be made with press brake.
#pressbrake #pressbraketools #pressbraketooling #tubebending #barbending
Well, as we told you before it is a special case because if you want constant production - it is more easy to purchase a simple tube bending machine. But with bar bending more force is necessary so the method to bend with press brake has its advantages. We publish it to show different possibilities for applications to be made with press brake.
#pressbrake #pressbraketools #pressbraketooling #tubebending #barbending
