Modbus problem - Lemmy.World
In the office we have an automation system that talks in modbus. Right now I
have Node Red that receives data from modbus (via IP), sends it to MQTT and send
messages from MQTT to modbus. In HA I have 15 MQTT climates that works. I want
to bypass Node Red; I’ve added an automation that gets triggered when a MQTT
values arrives and sends the new value to mobus: alias:
Climate_update_modbus_setpoint_studio1 description: "" triggers: - trigger: mqtt
topic: home_assistant/thermostat/setpoint/Studio1 actions: - data: hub: picnet
address: 1099 value: "{{ (trigger.payload | float * 10) | int }}" action:
modbus.write_register mode: queued The problem is that the modbus change takes a
lot. - I change the climate setpoint, after about 0.5 seconds the MQTT value
changes and the automation gets triggered - the modbus register changes in a
range of about 0.5-3 seconds - sometimes the automation gets triggered and I see
the trigger bar yellow instead of blue and the modbus register changes after
longer With Node Red I have no problem with modbus. What can I check to try to
find the source of the problem?
UPS: how to turn the server back on?
https://lemmy.world/post/33100642
UPS: how to turn the server back on? - Lemmy.World
I’ve installed an APC BX950MI-GR and connected it to my Proxmox server via USB.
It works: it turns off the server after x minutes after the power loss and it
turns itself off after other x minutes, when the powers come back on, the UPS
turns on and so does the server. The problem is if the power comes back after
the server receive the power off signal and before the UPS powers off, in this
case the UPS simply goes back in the normal state and the server…stays off. How
can I turn it back on? Thanks!
How to send backups on multiple location?
https://lemmy.world/post/28565924
How to send backups on multiple location? - Lemmy.World
I have 3 servers: - my house - my sister house - my parents house My server has
a lot of services (Nextcloud and Immich the ones that use more space), the other
2 servers only have Home Assistant, Frigate and some shared folders. On my
server I use Backrest to backup locally and on Wasabi, the other 2…well…are not
backed up 🙈 …yet! I was thinking to buy a couple of 14/20TB drives and install
them in my parents and sister servers so that each server can backup data on the
other 2. The backup will be done locally on all the servers with Backrest. How
do I copy the backups across servers? Should I use Syncthing or is it better to
use one repository per location on each Backrest? Or…other ideas? Thanks!
Lemmy.ml and its moderation, am I getting something wrong?
https://lemmy.world/post/25031556
Lemmy.ml and its moderation, am I getting something wrong? - Lemmy.World
Yesterday I was reading the post about the FUTO keyboard
[https://lemmy.zip/post/31178639] where there were a lot of messages deleted by
moderators.
I’ve commented there > What the heck happened with all the messages deleted by
moderator?
And it got deleted. Right now you can only see 4, but I’ve counted 19 messages
moderated and the post has been locked. Why?
I’ve had a look ad the modlog and the messages don’t seems to violate any policy
(now they’ve removed them in the modlog too). I’m pinging here lemmy.ml
[http://lemmy.ml] admin and the mods of the open source community where the post
was posted so they can have their say about it and clarify the situation to me.
@[email protected] [/u/[email protected]] [https://lemmy.ml/u/kevincox]
@[email protected] [/u/[email protected]]
[https://lemmy.ml/u/CrypticCoffee] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/Lettuceeatlettuce]
@[email protected] [/u/[email protected]] [https://lemmy.ml/u/Cloak] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/davel] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/dessalines] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/nutomic] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/JoeBidet] @[email protected]
[/u/[email protected]] [https://lemmy.ml/u/cypherpunks]
If I’m getting something wrong, please let me know, I’m here to discus and
understand if I’m getting something wrong or if something went wrong in the
moderation. Thanks! Down here you can see the deleted comments.
[https://lemmy.world/pictrs/image/21cd8e4e-bda6-4919-852d-370879c30125.png]
[https://lemmy.world/pictrs/image/2e8f7933-de0c-4f68-b8f0-ece08e70dc23.png] P.s.
I’m writing here because I think that this post on lemmy.ml [http://lemmy.ml]
wouldn’t last long.
Lemmy.ml and its moderation, am I getting something wrong?
https://lemmy.world/post/25023067
Lemmy.ml and its moderation, am I getting something wrong? - Lemmy.World
Yesterday I was reading the post about the FUTO keyboard
[https://lemmy.zip/post/31178639] where there were a lot of messages deleted by
moderators.
I’ve commented there > What the heck happened with all the messages deleted by
moderator?
And it got deleted. Right now you can only see 4, but I’ve counted 19 messages
moderated and the post has been locked. Why?
I’ve had a look ad the modlog and the messages don’t seems to violate any policy
(now they’ve removed them in the modlog too). I’m pinging here lemmy.ml
[http://lemmy.ml] admin and the mods of the open source community where the post
was posted so they can have their say about it and clarify the situation to me.
@[email protected] [https://lemmy.ml/u/kevincox] @[email protected]
[https://lemmy.ml/u/CrypticCoffee] @[email protected]
[https://lemmy.ml/u/Lettuceeatlettuce] @[email protected]
[https://lemmy.ml/u/Cloak] @[email protected] [https://lemmy.ml/u/davel]
@[email protected] [https://lemmy.ml/u/dessalines] @[email protected]
[https://lemmy.ml/u/nutomic] @[email protected] [https://lemmy.ml/u/JoeBidet]
@[email protected] [https://lemmy.ml/u/cypherpunks]
If I’m getting something wrong, please let me know, I’m here to discus and
understand if I’m getting something wrong or if something went wrong in the
moderation. Thanks! Down here you can see the deleted comments.
[https://lemmy.world/pictrs/image/e4bb08a5-ae9f-427f-9489-a78be5a74ae3.png]
[https://lemmy.world/pictrs/image/9b39420d-12c1-4b0b-9c71-d1d94b39277c.png] P.s.
I’m writing here because I think that this post on lemmy.ml [http://lemmy.ml]
wouldn’t last long.
FUTO keyboard post: what's with all the moderated comments?
https://lemmy.world/post/25016561
FUTO keyboard post: what's with all the moderated comments? - Lemmy.World
Out of curiosity, what happened in the post about the FUTO keyboard
[https://lemmy.zip/post/31189605] where there were a lot of messages deleted by
moderators? I’ve commented there
> What the heck happened with all the messages deleted by moderator?
And it got deleted. Right now you can only see 4, but I’ve counted 19 messages
moderated and the post has been locked.
Why?
Looking for an orders and stuff tracking software to self host
https://lemmy.world/post/24454922
Looking for an orders and stuff tracking software to self host - Lemmy.World
Hi all!
I often struggle to remember where/if I’ve ordered a product (my email account
is a mess, my own fault!), how much I’ve paid and if it was for me or for some
member of my family. Is there a self hosted service that you’ve tried and find
helpful that can do this kind of job?
Shelly devices not discovered - Lemmy.World
Hi all! I have a HA server in my LAN and all my IoT devices are in a separate
VLAN. In this way to insert all the devices I have to configure them all
manually using MQTT commands. Since I’m fed up about this method, I’ve added a
second NIC to the HA VM (Proxmox) that is in the IoT VLAN. When I enter the
terminal I see that HA has 2 IPs, one for each network and I thought that all
the Shelly (they use the same MQTT broker that uses HA, they’re not configured
for cloud connection and ColoT is enabled) devices would appear in HA, but…they
don’t. How do you think that I can troubleshoot this problem?
Immich: upload also duplicates - Lemmy.World
Hi all! I’ve just installed Immich and so far I love it! I’m trying to upload
about 1000 pictures, but in the upload process (web UI) automatically evaluates
the duplicates and don’t upload them. The ones that it evaluates as duplicates
are not real duplicates, but are rather very similar pictures that I prefer to
decide myself which one to keep. Is it possible to disable the duplicate
recognition during upload? Thanks!
E5-2620 v2 vs i7-6700k - Lemmy.World
Hi everybody!
I want to move my selfhosted services from a VPS to a PC in my house.
I have an E5-2620 and a it-6700K, which one would you pick and why?
The E5 already has 2 PCI-X each with 4 NIC (that I need to use with OpnSense to
share my Internet connection with my neighbor) that I would need to throw away
and buy as PCIe for the i7.
Thanks!
