NUC, Proxmox and HA (a noob seeking for help)
https://lemmy.world/post/13923714
NUC, Proxmox and HA (a noob seeking for help) - Lemmy.World
Hello everyone, I would like to get started with selfhost with two projects.
Project A (for me): A NUC with Proxmox installed on it, two VMs including a Home
Assistant and a NAS system that I haven’t chosen yet. The only question I have
with this project is: - how to access the NAS and HA separately from the outside
knowing that my access provider does not offer a static IP and that access to
each VM must be differentiated from Proxmox. Project B (for my uncle): A NUC
(with Proxmox or not, I don’t know yet, perhaps simpler for making backups),
with HA but especially Frigate. The goal is to use Google Coral to do
recognition on 3 video surveillance cameras. My questions are: - is Coral really
useful with 3 cameras? - do you need a Coral in USB or M.2 version? - are there
affordable NUCs with free M.2 slots? - won’t proxmox add a layer of complexity
with Coral/Frigate/a Zigbee dongle? Thank you in advance for your help and sorry
if my post is long. PS: if you have recommendations for cameras that work with
Frigate and are self-powered with solar panels, I’ll take them!
Work profil and privacy - Lemmy.world
I don’t know if it the better place to ask my question and if it’s not I
apologize… I am a biker and despite my love for FOSS applications, I cannot deny
that Waze is very practical (especially for speed camera signaling). I use
CalyxOS and there is a feature that makes it easy to use the work profile. On
the other hand, I do not know how useful it is to limit my data transmission to
Google. Is this really usefull? (I also have TrackerControl, but if I block
anything, Waze no longer works)
Klipper vs Marlin - Lemmy.world
I actually have Marlin + Octoprint but found out recently that Klipper exist. I
read everywhere that Klipper is better but I don’t really get why. I understand
that Klipper use raspberry as powerfull calculator instead of the STM32 of the
printer, but octoprint is used to send Gcode to Marlin too… So what’s the really
difference please?
Dinosaur - Lemmy.world
Bring my buddy at work
ABL on Ender 3 S1 plus - Lemmy.world
How is this possible even with abl? I dont’ get it…
Ok j’ai ma réponse.
La première photo est a upload normalement, les autres sont simplement à intégrer dans le texte via l’icône (image).
Aujourd’hui il est impossible de poster plusieurs photos simplement sans les intégrer dans le texte.
My first setup with a Creality Ender 3-S1 Plus
https://lemmy.world/post/2188370
My first setup with a Creality Ender 3-S1 Plus - Lemmy.world
Hi everyone, just to put some content in this community, I thought that sharing
my setup could be useful to some people! I have a Creality Ender 3-S1 Plus
[https://www.creality.com/products/creality-ender-3-s1-plus-3d-printer?spm=..page_1967279.products_display_1.1&spm_prev=..product_bd4931ac-1863-4b1a-85b5-def0896847c8.header_1.1]
as my first printer. Why this choice? because… I wanted a big set, it suited my
budget, and… I didn’t know too much about it so I followed my instinct. First
thing I did was to replace the original firmware with this one
[https://github.com/ThomasToka/MarlinFirmware]. Many more features including a
lot of work on the touch screen, and more compatibility with Octoprint (see
below). I then installed a led strip with a support
[https://www.thingiverse.com/thing:5820928] printed by me. Then Tasmota
connected sockets
[https://fr.aliexpress.com/item/4001230982267.html?spm=a2g0o.productlist.main.11.4e6337d1AmwDdc&algo_pvid=93176245-184e-48c1-b217-ccfc0d85bbd3&algo_exp_id=93176245-184e-48c1-b217-ccfc0d85bbd3-5&pdp_npi=3%40dis%21EUR%2122.15%2115.51%21%21%2123.88%21%21%40211bea7b16903610340053458d077f%2112000015521471616%21sea%21FR%214189599393&curPageLogUid=fs7myIEJbVJO]
(open source firmware). Driven by Octoprint, I can turn on my printer remotely,
then the LED strip and the printers will be turned off automatically at the end
of printing. Open-source was important to me, for control to be done locally
only, and not via a server on the other side of the world…
[https://lemmy.world/pictrs/image/f362ec9a-b051-4617-9920-da2e4a324673.jpeg] I
then discovered via Reddit (urg) the existence of Octoprint
[https://octoprint.org/]. After trying to install it on my first generation RPi,
I bought an RPi 4 and created myself an optimized server.
[https://lemmy.world/pictrs/image/2dc11ee5-05a4-4b13-87b9-e8a01e6674d6.jpeg] I
added some plugins including: - Bed visualizer: to have a 3D visual of the
bedleveling - OctoEverywhere! (in free version) to have access to my server
outside my local network (at work for example) - Signal Notifier: to send me a
message on Signal (I hate Meta and therefore Whatsapp) when the print is
finished - Tasmota: to control my connected sockets, very easy to use by adding
commands in my Gcode - UI Customizer: to have a beautiful interface - Slicer
Thumbnails: to have a preview of the Gcode rather than just the name (requires
manipulation in Cura) - M73 progress: to display the printing progress on the
touch screen
[https://lemmy.world/pictrs/image/ab8f53ee-26ef-4e13-980b-77efe108f4d9.png] To
perfect my installation and avoid going back and forth to check my impressions,
I installed a Logitech HD C270 with a custom case.
[https://lemmy.world/pictrs/image/62d54688-323a-42c2-bf56-9c35b69137ab.jpeg]
Here, to conclude, I had a lot of trouble with Signal to install it on the RPi
but I created a script [https://github.com/Nosnahc/Signal-cli-with-Octopi] to
achieve this easily. And I burned my first bed by putting a Z-offset too low so
I bought another one on amazon
[https://www.amazon.fr/dp/B0BR59Y4Q7?psc=1&ref=ppx_yo2ov_dt_b_product_details]
which I am very satisfied with. My next project will be to confine my printer to
print ABS. Edit : (Yes, I need to clean the bed) Edit 2 : Here’s the video
[https://piped.video/watch?v=VtSVgwfsRpA] to not burn your bed, watch it until
the end!
More than 1 picture - Lemmy.world
Hi, I want to make a big post whith many pictures in 3Dprinting community but I
don’t know how to post more than 1 picture. Is there an easy way? Thanks!
Besoin d'aide sur Lemmy - Lemmy.world
Bonjour à tous, Je viens vers vous car j’ai un petit souci avec Lemmy. Je
voudrais faire un très gros post sur 3Dprinting et y poster plusieurs photos
avec, mais je n’arrive à intégrer qu’une photo. Quelqu’un s’aurait comment faire
svp?
Bulbisar - Lemmy.world
Just want to share one of my prints. Printer in Ender 3-S1 plus. Painted with
Posca pens
