I’ve used
Hue Thief in the past. Usually works pretty well.
GitHub - vanviegen/hue-thief: Factory reset Philips Hue bulbs using an EZSP-based Zigbee USB stick. After a reset, bulbs can easily join any type of compatible bridge.
Factory reset Philips Hue bulbs using an EZSP-based Zigbee USB stick. After a reset, bulbs can easily join any type of compatible bridge. - GitHub - vanviegen/hue-thief: Factory reset Philips Hue b...
Bend the end of a zip tie into a U shape roughly the size of hole spacing and try feed it in one hole and out another.
Did you also put thermal paste between the slug and the case?
Might turn into a Streetlamp Le Moose situation.
I found an old 3u server chassis and put a regular atx motherboard power supply in it. 4 noctua 80mm fans and it’s relatively quiet for a server.
I bought one of those passively cooled router boxes from
AliExpress and have been running opnsense for over a year on it now. It’s way overkill for router + ad blocking, but it’s been working great.
What’s the thermostat controlling? How is it wired up? I replaced mine with ram esphome with a temp sensor and a relay that bridges the pins when it wants to turn on. Mine is connected to home assistant but i think you can use esphome devices stand alone.
You can change the support top layer settings and mess with if there is top layers and how many there are, then adjust the gap between support top layer and the first layer of the print on top of it until it’s supported correctly and comes away easily.
The only reason I want it on the router is if either my vm or my server go down for whatever reason I have no access. My router is way overkill hardware wise (it’s running opnsense and Adblocking and I’ve never seen above 2%) cpu usage.
Is anyone successfully running Nginx in opnsense?
https://lemmy.world/post/1912753
Is anyone successfully running Nginx in opnsense? - Lemmy.world
I currently have Nginx Proxy Manager running through portainer in a VM on my
truenas server but I’d like to have it running directly on my opnsense router. I
tried to get it running before I set it up in docker but I couldn’t manage to
get the Nginx plugin working properly. Is there an Nginx plug-in available for
opnsense that has the same web front end?
