Failed to build U-Boot for Fairphone 5. - Lemmy.World

Hi I wanna install U-Boot on my Fairphone 5 https://wiki.postmarketos.org/wiki/Fairphone_5_(fairphone-fp5)#U-Boot [https://wiki.postmarketos.org/wiki/Fairphone_5_(fairphone-fp5)#U-Boot] but there is not enable UHS support , &: [a@archlinux ~]$ cd /run/media/a/1b0cfe57-4f05-4100-835d-f90559411e31 git clone https://source.denx.de/u-boot/u-boot.git cd u-boot make CROSS_COMPILE="aarch64-linux-gnu-" qcm6490_defconfig qcom-phone.config make menuconfig make -j$(nproc) Cloning into 'u-boot'... remote: Enumerating objects: 1108390, done. remote: Counting objects: 100% (5292/5292), done. remote: Compressing objects: 100% (1584/1584), done. remote: Total 1108390 (delta 3737), reused 5196 (delta 3681), pack-reused 1103098 (from 1) Receiving objects: 100% (1108390/1108390), 247.71 MiB | 47.96 MiB/s, done. Resolving deltas: 100% (922771/922771), done. Updating files: 100% (37532/37532), done. HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o YACC scripts/kconfig/zconf.tab.[ch] LEX scripts/kconfig/zconf.lex.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf generated_defconfig:155:warning: override: reassigning to symbol ARM generated_defconfig:155:warning: override: ARM changes choice state generated_defconfig:159:warning: override: reassigning to symbol DEFAULT_DEVICE_TREE generated_defconfig:160:warning: override: reassigning to symbol FASTBOOT_BUF_ADDR # # configuration written to .config # Using .config as base Merging ./board/qualcomm/qcom-phone.config Value of CONFIG_ENV_DEFAULT_ENV_TEXT_FILE is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="board/qualcomm/default.env" New value: CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="board/qualcomm/qcom-phone.env" Value of CONFIG_PANIC_HANG is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_PANIC_HANG is not set New value: CONFIG_PANIC_HANG=y Value of CONFIG_CMD_PAUSE is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_CMD_PAUSE is not set New value: CONFIG_CMD_PAUSE=y Value of CONFIG_BOOT_RETRY is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_BOOT_RETRY is not set New value: CONFIG_BOOT_RETRY=y Value of CONFIG_BUTTON_REMAP_PHONE_KEYS is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_BUTTON_REMAP_PHONE_KEYS is not set New value: CONFIG_BUTTON_REMAP_PHONE_KEYS=y Value of CONFIG_FASTBOOT_BUF_ADDR is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: CONFIG_FASTBOOT_BUF_ADDR=0xd8800000 New value: CONFIG_FASTBOOT_BUF_ADDR=0x1A000000 Value of CONFIG_USB_FUNCTION_ACM is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_USB_FUNCTION_ACM is not set New value: CONFIG_USB_FUNCTION_ACM=y Value of CONFIG_CMD_UMS_ABORT_KEYED is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_CMD_UMS_ABORT_KEYED is not set New value: CONFIG_CMD_UMS_ABORT_KEYED=y Value of CONFIG_CONSOLE_RECORD is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_CONSOLE_RECORD is not set New value: CONFIG_CONSOLE_RECORD=y Value of CONFIG_FASTBOOT_OEM_RUN is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: # CONFIG_FASTBOOT_OEM_RUN is not set New value: CONFIG_FASTBOOT_OEM_RUN=y Value of CONFIG_REQUIRE_SERIAL_CONSOLE is redefined by fragment ./board/qualcomm/qcom-phone.config: Previous value: CONFIG_REQUIRE_SERIAL_CONSOLE=y New value: # CONFIG_REQUIRE_SERIAL_CONSOLE is not set # # merged configuration written to .config (needs make) # scripts/kconfig/conf --oldconfig Kconfig * * Restart config... * * * Autoboot options * Autoboot (AUTOBOOT) [Y/n/?] y delay in seconds before automatically booting (BOOTDELAY) [1] 1 Stop autobooting via specific input key / string (AUTOBOOT_KEYED) [N/y/?] n Allow a specify key to run a menu from the environment (AUTOBOOT_USE_MENUKEY) [N/y/?] n Show a menu on boot (AUTOBOOT_MENU_SHOW) [N/y/?] n Boot retry feature (BOOT_RETRY) [Y/n/?] y Timeout in seconds before attempting to boot again (BOOT_RETRY_TIME) [1] 1 Minimum timeout in seconds for 'bootretry' (BOOT_RETRY_MIN) [1] (NEW) Reset the board to retry autoboot (RESET_TO_RETRY) [N/y/?] (NEW) Run bootcmd on retry (RETRY_BOOTCMD) [Y/n/?] y * * Console * Console recording (CONSOLE_RECORD) [Y/n/?] y Enable console recording during pre-relocation init (CONSOLE_RECORD_INIT_F) [Y/n/?] y Output buffer size (CONSOLE_RECORD_OUT_SIZE) [0x6000] 0x6000 Output buffer size before relocation (CONSOLE_RECORD_OUT_SIZE_F) [0x400] (NEW) Input buffer size (CONSOLE_RECORD_IN_SIZE) [0x100] (NEW) Console input buffer size (SYS_CBSIZE) [512] 512 Console output buffer size (SYS_PBSIZE) [1044] 1044 Add functionality to disable console completely (DISABLE_CONSOLE) [N/y/?] n Board specific string to be added to uboot version string (IDENT_STRING) [] loglevel (LOGLEVEL) [4] 4 Support a silent console (SILENT_CONSOLE) [N/y/?] n Use a silent console in SPL (SPL_SILENT_CONSOLE) [N/y/?] n Use a silent console in TPL (TPL_SILENT_CONSOLE) [N/y/?] n Buffer characters before the console is available (PRE_CONSOLE_BUFFER) [N/y/?] n Enable console flush support (CONSOLE_FLUSH_SUPPORT) [Y/n/?] y Flush console buffer on every newline character (CONSOLE_FLUSH_ON_NEWLINE) [N/y/?] n Enable console multiplexing (CONSOLE_MUX) [Y/n/?] y Select console devices from the environment (SYS_CONSOLE_IS_IN_ENV) [Y/n/?] y Allow board control over console overwriting (SYS_CONSOLE_OVERWRITE_ROUTINE) [N/y/?] n Update environment variables during console init (SYS_CONSOLE_ENV_OVERWRITE) [N/y/?] n Don't display the console devices on boot (SYS_CONSOLE_INFO_QUIET) [N/y/?] n Allow deregistering stdio devices (SYS_STDIO_DEREGISTER) [Y/?] y Allow deregistering stdio devices in SPL (SPL_SYS_STDIO_DEREGISTER) [N/y/?] n Enable a null device for stdio (SYS_DEVICE_NULLDEV) [N/y/?] n # # configuration written to .config # UPD scripts/kconfig/.mconf-cfg HOSTCC scripts/kconfig/mconf.o HOSTCC scripts/kconfig/lxdialog/checklist.o HOSTCC scripts/kconfig/lxdialog/inputbox.o HOSTCC scripts/kconfig/lxdialog/menubox.o HOSTCC scripts/kconfig/lxdialog/textbox.o HOSTCC scripts/kconfig/lxdialog/util.o HOSTCC scripts/kconfig/lxdialog/yesno.o HOSTLD scripts/kconfig/mconf scripts/kconfig/mconf Kconfig configuration written to .config *** End of the configuration. *** Execute 'make' to start the build or try 'make help'. scripts/kconfig/conf --syncconfig Kconfig UPD include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep cc1: warning: unknown register name: x18 cc1: warning: unknown register name: x18 GEN include/autoconf.mk UPD include/generated/timestamp_autogenerated.h UPD include/generated/dt.h ENVC include/generated/env.txt UPD include/generated/defaultenv_autogenerated.h ENVP include/generated/env.in HOSTCC scripts/dtc/dtc.o HOSTCC scripts/dtc/flattree.o HOSTCC scripts/dtc/data.o HOSTCC scripts/dtc/livetree.o HOSTCC scripts/dtc/treesource.o HOSTCC scripts/dtc/srcpos.o HOSTCC scripts/dtc/fstree.o HOSTCC scripts/dtc/checks.o HOSTCC scripts/dtc/util.o ENVT include/generated/environment.h LEX scripts/dtc/dtc-lexer.lex.c YACC scripts/dtc/dtc-parser.tab.[ch] HOSTCC scripts/dtc/yamltree.o HOSTCC scripts/dtc/libfdt/fdt.o HOSTCC scripts/dtc/libfdt/fdt_ro.o HOSTCC scripts/dtc/libfdt/fdt_wip.o UPD include/config/uboot.release HOSTCC scripts/dtc/libfdt/fdt_sw.o HOSTCC scripts/dtc/libfdt/fdt_rw.o HOSTCC scripts/dtc/libfdt/fdt_strerror.o HOSTCC scripts/dtc/libfdt/fdt_empty_tree.o HOSTCC scripts/dtc/libfdt/fdt_addresses.o HOSTCC scripts/dtc/libfdt/fdt_overlay.o HOSTCC scripts/dtc/fdtoverlay.o HOSTCC scripts/dtc/dtc-lexer.lex.o HOSTCC scripts/dtc/dtc-parser.tab.o UPD include/generated/version_autogenerated.h HOSTLD scripts/dtc/fdtoverlay HOSTLD scripts/dtc/dtc CC arch/arm/lib/asm-offsets.s CC lib/asm-offsets.s cc1: warning: unknown register name: x18 cc1: error: bad value ‘armv8-a+crc’ for ‘-march=’ switch cc1: note: valid arguments to ‘-march=’ switch are: nocona core2 nehalem corei7 westmere sandybridge corei7-avx ivybridge core-avx-i haswell core-avx2 broadwell skylake skylake-avx512 cannonlake icelake-client rocketlake icelake-server cascadelake tigerlake cooperlake sapphirerapids emeraldrapids alderlake raptorlake meteorlake graniterapids graniterapids-d arrowlake arrowlake-s lunarlake pantherlake diamondrapids bonnell atom silvermont slm goldmont goldmont-plus tremont gracemont sierraforest grandridge clearwaterforest x86-64 x86-64-v2 x86-64-v3 x86-64-v4 eden-x2 nano nano-1000 nano-2000 nano-3000 nano-x2 eden-x4 nano-x4 lujiazui yongfeng shijidadao k8 k8-sse3 opteron opteron-sse3 athlon64 athlon64-sse3 athlon-fx amdfam10 barcelona bdver1 bdver2 bdver3 bdver4 znver1 znver2 znver3 znver4 znver5 btver1 btver2 native make[1]: *** [scripts/Makefile.build:139: arch/arm/lib/asm-offsets.s] Error 1 make[1]: *** Waiting for unfinished jobs.... cc1: warning: unknown register name: x18 cc1: error: bad value ‘armv8-a+crc’ for ‘-march=’ switch cc1: note: valid arguments to ‘-march=’ switch are: nocona core2 nehalem corei7 westmere sandybridge corei7-avx ivybridge core-avx-i haswell core-avx2 broadwell skylake skylake-avx512 cannonlake icelake-client rocketlake icelake-server cascadelake tigerlake cooperlake sapphirerapids emeraldrapids alderlake raptorlake meteorlake graniterapids graniterapids-d arrowlake arrowlake-s lunarlake pantherlake diamondrapids bonnell atom silvermont slm goldmont goldmont-plus tremont gracemont sierraforest grandridge clearwaterforest x86-64 x86-64-v2 x86-64-v3 x86-64-v4 eden-x2 nano nano-1000 nano-2000 nano-3000 nano-x2 eden-x4 nano-x4 lujiazui yongfeng shijidadao k8 k8-sse3 opteron opteron-sse3 athlon64 athlon64-sse3 athlon-fx amdfam10 barcelona bdver1 bdver2 bdver3 bdver4 znver1 znver2 znver3 znver4 znver5 btver1 btver2 native make[1]: *** [scripts/Makefile.build:139: lib/asm-offsets.s] Error 1 make: *** [Makefile:2258: prepare0] Error 2 [a@archlinux u-boot]$ gzip -k u-boot-nodtb.bin gzip: u-boot-nodtb.bin: No such file or directory Also why not this boot.img directly available to download?