Help starting with decoding satellite channels
https://lemmy.world/post/12338589
Help starting with decoding satellite channels - Lemmy.World
I didn’t have much much with iptv as it buffers a lot and it’s not because of my
broadband speed, I already have a satellite dish on my house and was thinking
about making the use of it but I don’t know where to start. I’m assuming I need
to get a special box, maybe like this?
https://www.ebay.co.uk/itm/354681753333?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QTcb7QRmQpO&sssrc=4429486&ssuid=2LCMph_nQpa&var=&widget_ver=artemis&media=COPY
[https://www.ebay.co.uk/itm/354681753333?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QTcb7QRmQpO&sssrc=4429486&ssuid=2LCMph_nQpa&var=&widget_ver=artemis&media=COPY]
But then I wouldn’t know what to do with it, do I need to get some decryption
keys from somewhere every few weeks?
Home Assistant steered to be glitchy after two years
https://lemmy.world/post/3105128
Home Assistant steered to be glitchy after two years - Lemmy.world
I’ve been happy with my setup for two years, I’ve got 15 devices, ikea light
bulbs, ikea switches and motion sensors, it all works perfectly until last month
or two. Motion sensors start to change the status to “clear” which triggers the
lights off while I’m still moving in the kitchen and bathroom. Quite often now
lags happen between motion sensor switching on the lights or the switch turning
lights on or off - it always used to be instant. My setup is not the newest as
I’ve got RaspberryPi with CC2531 but I’ve been running old software all that
time so that’s not the case, I’ve only updated everyone now hoping it will fix
my issues but that didn’t help… I know probably you will say I need to check
logs but did anyone experience this? I don’t use my setup for anything else like
Plex Server or FTP etc… [https://i.imgur.com/TGxUriS.jpg] That’s some examples
errors I found when I was using ikea switch to turn the lights on. Is it best to
have HA on Windows instead using different dongle like SkyConnect?
Installing Home Assistant on older Raspberry Pi (2)
https://lemmy.world/post/1915721
Installing Home Assistant on older Raspberry Pi (2) - Lemmy.world
I’m running 5.13 on RPi 2 and I think it’s time to finally update, I only use it
for lightbulbs and motion sensors really and it’s running fine aparto from not
being able to make a backup and update via the GUI. I think it’s best to just
make a fresh install, I’m going through the setup and I can only choose Home
Assistant OS 10.3 (RPi 3) - can I choose this to install on my RPi 2?
Ahh I figured it out.
I went to Supervisor > Zigbee2mqtt > Configuration tab - there I noticed there was still old IP (server: mqtt://192.168.0.35:1883), I’ve updated that and now everything works again!
I changed IP address, now all devices are unavailable
https://lemmy.world/post/1462244
I changed IP address, now all devices are unavailable - Lemmy.world
I installed Google Wifi which resulted in having new network, old router was
under 192.168.0.1, new Google is on 192.168.1.1. So previous HA IP was
192.168.0.35, I changed it via the supervisor to 192.168.1.35. All devices are
unavailable now… Zigbee2mqtt says 502: Bad Gateway… What do I do, how to fix
that? Thanks in advance.
App return rejected - LemmyWorld
I bought video editor app LumaFusion for £30, I tried editing a video but it
doesn’t work, I contacted their support and sent a sample video I’m trying to
work with, they said they can reproduce the issue but don’t know why it doesn’t
work and suggest encoding the video on PC with a different codec. I requested a
refund next day via the website and it was rejected. I went on Apple chat
support and they said because I already requested a refund and it was rejected
they cannot change that decision and there’s nothing they can do. I’m stuck with
a useless app and no refund… Any ideas what can I do to get a refund?
