Poor speeds from my home server - Lemmy.World
So I am trying to track down what is possibly slowing down my download
connection from my Debian server to my devices (streaming box, laptop, other
servers, etc). First let me go over my network infrastructure: OPNsense Firewall
(Intel C3558R) <-10gb SFP+ DAC-> Managed Switch <-2.5gb RJ45-> Clients, 2.5gb AX
Access Point, and Debian Server (Intel N100). Under a 5 minute stress test
between my laptop (2.5gb adapter plugged into switch) and the Debian Server
(2.5gb Intel I226-V NIC), I get the full bandwidth when uploading however when
downloading it tops out around 300-400mbps. The download speed does not fair any
better when connecting to the AX access point, with upload dropping to around
500mbps. File transfers between the server and my laptop are also approximately
300mbps. And yes, I manually disabled the wifi card when testing over ethernet.
Speed tests to the outside servers reflect approximately 800/20mbps (on an
800mbps plan). Fearing that the traffic may be running through OPNsense and that
my firewall was struggling to handle the traffic, I disconnected the DAC cable
and reran the test just through the switch. No change in results. Identified
speeds per device: Server: 2500 Mb/s Laptop: 2500Base-T Switch: 2,500Mbps
Firewall: 10Gbase-Twinax Operating Systems per device: Server: Debian Bookworm
Laptop: macOS Sonoma (works well for my use case) Switch: some sort of embedded
software Firewall: OPNsense 24.1.4-amd64 Network Interface per device: Server:
Intel I226-V Laptop: UGreen Type C to 2.5gb Adapter Switch: RTL8224-CG Firewall:
Intel X553 The speed test is hosted through Docker on my server.
Advice regarding poor download speeds within LAN
https://lemmy.world/post/13739607
Advice regarding poor download speeds within LAN - Lemmy.World
So I am trying to track down what is possibly slowing down my download
connection from my Debian server to my devices (streaming box, laptop, other
servers, etc). First let me go over my network infrastructure: OPNsense Firewall
(Intel C3558R) <-10gb SFP+ DAC-> Managed Switch <-2.5gb RJ45-> Clients, 2.5gb AX
Access Point, and Debian Server (Intel N100). Under a 5 minute stress test
between my laptop (2.5gb adapter plugged into switch) and the Debian Server
(2.5gb Intel I226-V NIC), I get the full bandwidth when uploading however when
downloading it tops out around 300-400mbps. The download speed does not fair any
better when connecting to the AX access point, with upload dropping to around
500mbps. File transfers between the server and my laptop are also approximately
300mbps. And yes, I manually disabled the wifi card when testing over ethernet.
Speed tests to the outside servers reflect approximately 800/20mbps (on an
800mbps plan). Fearing that the traffic may be running through OPNsense and that
my firewall was struggling to handle the traffic, I disconnected the DAC cable
and reran the test just through the switch. No change in results. Identified
speeds per device: - Server: 2500 Mb/s - Laptop: 2500Base-T - Switch: 2,500Mbps
- Firewall: 10Gbase-Twinax Operating Systems per device: - Server: Debian
Bookworm - Laptop: macOS Sonoma (works well for my use case) - Switch: some sort
of embedded software - Firewall: OPNsense 24.1.4-amd64 Network Interface per
device: - Server: Intel I226-V - Laptop: UGreen Type C to 2.5gb Adapter -
Switch: RTL8224-CG - Firewall: Intel X553 edit: Forgot to add that the
OpenSpeedTest is being hosted in Docker by my local server.
Is there a term for a gathering of trees in an open field?
https://lemmy.world/post/13573120
Is there a term for a gathering of trees in an open field? - Lemmy.World
I’ve been searching for a bit and figured I’d ask y’all.
Configuring Porkbun DNS for internal IPs
https://lemmy.world/post/12370461
Configuring Porkbun DNS for internal IPs - Lemmy.World
Hey everyone, asking here since I’ve been trying (and failing) at the numerous
guides online. The end goal is so that I can have proper Let’s Encrypt certs for
my self hosted servers to include VaultWarden (which will not work with
self-signed or http) as well as have easy urls for myself and family to use. So
I am trying to setup my Porkbun domain with my Opnsense nginx plugin in order to
resolve the address (such as navidrome.example.com
[http://navidrome.example.com] to my local server’s navidrome instance @
192.168.1.99:4533). I attempted this guide here
[https://forum.opnsense.org/index.php?topic=24778.0] as well as trying to
configure a separate nginx on the server itself. I haven’t had much luck with
these guides
[https://kb.porkbun.com/article/54-pointing-your-domain-to-hosting-with-a-records]
either. Any address outside of router.example.com [http://router.example.com]
results in a connection failure. Including when I tried to route everything like
navi.router.example.com [http://navi.router.example.com]. This is with and
without wildcards in the A Record entries on Porkbun’s DNS control panel. I’ve
tried *.example.com, *.router.example.com, navidrome.example.com
[http://navidrome.example.com], navidrome.router.example.com
[http://navidrome.router.example.com]. Sorry if this seems like a simple problem
or if I am missing a massive step, I am complete newbie at
self-hosting/networking.
dontwakethetrees (she/her)